iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TR 10064-2:1996/Cor 2:2006

(Corrigendum)

Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 2

Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 2

Constitutes a code of practice dealing with inspection relevant to radial composite deviations, runout, tooth thickness and backlash of cylindrical involute gears; i.e. with measurements referred to double flank contact.

Code pratique de réception — Partie 2: Contrôle relatif aux écarts composés radiaux, au faux-rond, à l'épaisseur de dent et au jeu entre dents — Rectificatif technique 2

Valjasti zobniki – Smernice za meritve – 2. del: Meritve odstopkov pri radialnem preskušanju, odstopki krožnega teka, debeline zob in bočnega razstopa – Tehnični popravek 2

General Information

Status
Published
Publication Date
08-Aug-2006
ICS
21.200 - Gears
Technical Committee
ISO/TC 60 - Gears
Drafting Committee
ISO/TC 60/WG 2 - Accuracy of gears
Current Stage
6060 - International Standard published
Completion Date
09-Aug-2006
Ref Project
SIST-TP ISO/TR 10064-2:1998/TC 2:2006 - ISO/TR 10064-2:1996/Cor 2:2006

Relations

Corrects
ISO/TR 10064-2:1996 - Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
Effective Date
06-Jun-2022
Child
ISO/TR 10064-2:1996 - Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
Effective Date
15-Apr-2008
Child
SIST ISO/TR 10064-2:1998 - Cylindrical gears - Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
Effective Date
12-May-2008

Buy Standard

TP ISO/TR 10064-2:1998/TC 2:2006TP ISO/TR 10064-2:1998/TC 2:2006
PreviousNext
Corrigendum
TP ISO/TR 10064-2:1998/TC 2:2006
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST-TP ISO/TR 10064-2:1998/TC 2:2006SLOVENSKIdecember 2006
STANDARDValjasti zobniki – Smernice za meritve – 2. del: Meritve odstopkov pri radialnem preskušanju, odstopki krožnega teka, debeline zob in bočnega razstopa – Tehnični popravek 2Cylindrical gears - Code of inspection practice -
Part 2: Inspection related to radial composite
deviations, runout, tooth thickness and backlash - Technical Corrigendum 2©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST-TP ISO/TR 10064-2:1998/TC 2:2006(en)ICS21.200







ICS
21.200 Ref. No. ISO/TR 10064-2:1996/Cor.2:2006(E)©
ISO 2006 – All rights reserved Printed in Switzerland
TECHNICAL REPORT ISO/TR 10064-2:1996 TECHNICAL CORRIGENDUM 2 Published 2006-08-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
•
•
OR
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 1328-2:2020(Main)
Cylindrical gears — ISO system of flank tolerance classification — Part 2: Definitions and allowable values of double flank radial composite deviations
SIST ISO 1328-2:2023

This document establishes a gear tooth classification system relevant to double flank radial composite deviations of individual cylindrical involute gears and sector gears. It specifies the appropriate definitions of gear tooth deviations, the structure of the gear tooth flank classification system, and the allowable values of the gear tooth deviations. It provides formulae to calculate tolerances for individual product gears when mated in double flank contact with a master gear. Tolerance tables are not included. This document is applicable to gears with three or more teeth that have reference diameters of up to 600 mm. This document does not provide guidance on gear design nor does it recommend tolerances.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
ISO
ISO/TR 10064-1:2019(Main)
Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks
SIST-TP ISO/TR 10064-1:2020

This document supplements ISO 1328‑1:2013. It provides a code of practice dealing with measurements on flanks of individual cylindrical involute gears, i.e. with the measurement of pitch, profile, helix and tangential composite characteristics. It describes measuring equipment, provides advice for gear measuring methods and for the analysis of measurement results, and discusses the interpretation of results. Measurements using a double flank tester are not included (see ISO/TR 10064‑2). This document only applies to involute gears.

  • Technical report
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    88 pages
    English language
    sale 15% off
  • Technical report
    103 pages
    French language
    sale 15% off
ISO
ISO 1328-1:2013(Main)
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth

ISO 1328-1:2013 establishes a tolerance classification system relevant to manufacturing and conformity assessment of tooth flanks of individual cylindrical involute gears. It specifies definitions for gear flank tolerance terms, the structure of the flank tolerance class system, and allowable values. ISO 1328-1:2013 provides the gear manufacturer and the gear buyer with a mutually advantageous reference for uniform tolerances.

  • Standard
    50 pages
    English language
    sale 15% off
  • Standard
    53 pages
    French language
    sale 15% off
  • Standard
    53 pages
    French language
    sale 15% off
ISO
IEC 61400-4:2012(Main)
Wind turbines — Part 4: Design requirements for wind turbine gearboxes

IEC 61400-4:2012(E) is applicable to enclosed speed increasing gearboxes for horizontal axis wind turbine drivetrains with a power rating in excess of 500 kW. This standard applies to wind turbines installed onshore or offshore. It Standard provides guidance on the analysis of the wind turbine loads in relation to the design of the gear and gearbox elements. The gearing elements covered by this standard include such gears as spur, helical or double helical and their combinations in parallel and epicyclic arrangements in the main power path. The standard is based on gearbox designs using rolling element bearings. Also included is guidance on the engineering of shafts, shaft hub interfaces, bearings and the gear case structure in the development of a fully integrated design that meets the rigours of the operating conditions. Lubrication of the transmission is covered along with prototype and production testing. Finally, guidance is provided on the operation and maintenance of the gearbox.

  • Standard
    146 pages
    English language
    sale 15% off
ISO
ISO/TR 10064-6:2009(Main)
Code of inspection practice — Part 6: Bevel gear measurement methods
SIST-TP ISO/TR 10064-6:2009

ISO/TR 10064-6:2009 provides information on measuring methods and practices of unassembled bevel and hypoid gears and gear pairs. It includes methods and practices, which permit the manufacturer and purchaser to conduct measuring procedures which are accurate and repeatable to a degree compatible with the specified tolerance grade of ISO 17485. Tolerances are given in Clause 5 of ISO 17485:2006, for calculating the maximum values allowed by the specific tolerance grade. Required and optional measuring methods are provided in Clause 6 of ISO 17485:2006. ISO/TR 10064-6:2009 applies to bevel gear components as defined in ISO 17485. It does not apply to enclosed gear unit assemblies, including speed reducers or increasers, gear motors, shaft mounted reducers, high speed units, or other enclosed gear units which are manufactured for a given power, speed, ratio or application.

  • Technical report
    37 pages
    English language
    sale 15% off
  • Technical report
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    40 pages
    French language
    sale 15% off
ISO
ISO/TR 10064-4:1998/Cor 1:2006(Corrigendum)
Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking — Technical Corrigendum 1
SIST-TP ISO/TR 10064-4:2002/TC 1:2006

Provides recommendations on measurement considerations for surface roughness and tooth contact pattern checking of gear flanks.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO/TR 10064-3:1996/Cor 1:2006(Corrigendum)
Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes — Technical Corrigendum 1
SIST-TP ISO/TR 10064-3:1998/TC 1:2006

Provides recommended values for dimensional deviations on blanks, centre distance and parallelism of axes of gears. Numerical values given in this document are not to be regarded as strict ISO quality criteria, but may serve as a guide for mutual agreements, for steel or iron components.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO/TR 10064-5:2005/Cor 1:2006(Corrigendum)
Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments — Technical Corrigendum 1
SIST-TP ISO/TR 10064-5:2006/TC 1:2006

This part of ISO/TR 10064 provides additional information and examples to support the implementation of ISO 18653. It proposes evaluation and calibration procedures for involute, helix, pitch, runout, and tooth thickness measurement processes. Methods are given for evaluation of the condition and alignments of instrument elements such as centres, guideways, probe systems, etc. Recommendations are included for establishment of a proper environment and for statistical data evaluation procedures. It also covers the application of gear artifacts to the estimation of U95 measurement process uncertainty. Guidance on the application of measurement processes to the inspection of product gears is provided, including fitness for use and the recommended limits for U95 uncertainty based upon the accuracy tolerances of product gears to be inspected. Many of its recommendations may also be applicable to the measurement of worms, worm wheels, bevel gears and gear cutting tools.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 17485:2006(Main)
Bevel gears — ISO system of accuracy
SIST ISO 17485:2006

ISO 17485:2006 establishes a classification system that can be used to communicate geometrical accuracy specifications of unassembled bevel gears, hypoid gears, and gear pairs. It defines gear tooth accuracy terms, and specifies the structure of the gear accuracy grade system and allowable values. ISO 17485:2006 provides the gear manufacturer and the gear buyer with a mutually advantageous reference for uniform tolerances. Ten accuracy grades are defined, numbered 2 to 11 in order of decreasing precision. ISO 17485:2006 does not apply to enclosed gear unit assemblies, including speed reducers or increasers, gear motors, shaft mounted reducers, high speed units, or other enclosed gear units manufactured for a given power, speed, ratio or application. Gear design is beyond the scope of ISO 17485:2006. The use of the accuracy grades for the determination of gear performance requires extensive experience with specific applications. Therefore, the users of this International Standard are cautioned against the direct application of tolerance values to a projected performance of unassembled (loose) gears when they are assembled.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    35 pages
    French language
    sale 15% off
ISO
ISO/TR 10064-5:2005(Main)
Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments
SIST-TP ISO/TR 10064-5:2006

ISO/TR 10064-5:2005 provides additional information and examples to support the implementation of ISO 18653. It proposes evaluation and calibration procedures for involute, helix, pitch, runout, and tooth thickness measurement processes. Methods are given for evaluation of the condition and alignments of instrument elements such as centres, guideways, probe systems, etc. Recommendations are included for establishment of a proper environment and for statistical data evaluation procedures. It also covers the application of gear artefacts to the estimation of U95 measurement process uncertainty. Guidance on the application of measurement processes to the inspection of product gears is provided, including fitness for use and the recommended limits for U95 uncertainty based upon the accuracy tolerances of product gears to be inspected. Many of its recommendations may also be applicable to the measurement of worms, worm wheels, bevel gears and gear cutting tools

  • Technical report
    89 pages
    English language
    sale 15% off
  • Technical report
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    92 pages
    French language
    sale 15% off