ISO 10425:2023

Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance

This document specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries. Typical applications include tubing lines, rod hanger lines, sand lines, cable-tool drilling and clean out lines, cable tool casing lines, rotary drilling lines, winch lines, horse head pumping unit lines, torpedo lines, mast‑raising lines, guideline tensioner lines, riser tensioner lines, mooring and anchor lines. Wire ropes for lifting slings and cranes, and wire for well-measuring and strand for well-servicing are also included. The minimum breaking forces for the more common sizes, grades and constructions of stranded rope are given in tables. However, this document does not restrict itself to the classes covered by those tables. Other types can also conform with its requirements. The minimum breaking force values for these wire ropes are provided by the manufacturer. For information only, other tables present the minimum breaking forces for large diameter stranded and spiral ropes (i.e. spiral strand and locked coil), while approximate nominal length masses for the more common stranded rope constructions and large diameter stranded and spiral ropes are also given.

Câbles en acier pour les industries du pétrole et du gaz naturel — Exigences minimales et conditions de réception

L'ISO 10425:2003 spécifie les exigences minimales et les conditions de réception pour la fabrication et les essais des câbles en acier ne dépassant pas la qualité de câble 2160, utilisés dans les industries du pétrole et du gaz naturel.

General Information

• Status: Published
• Publication Date: 02-Oct-2023
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: ISO/TC 105 - Steel wire ropes
• Drafting Committee: ISO/TC 105 - Steel wire ropes
• Current Stage: 6060 - International Standard published
• Start Date: 03-Oct-2023
• Due Date: 07-Apr-2024
• Completion Date: 03-Oct-2023

Relations

• Revises: ISO 10425:2003 - Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10425
Second edition
2023-10
Steel wire ropes for the petroleum and
natural gas industries — Minimum
requirements and terms of acceptance
Câbles en acier pour les industries du pétrole et du gaz naturel —
Exigences minimales et conditions de réception
Reference number
ISO 10425:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 10425:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10425:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 2
4.1 Material . 2
4.1.1 Wire. 2
4.1.2 Core . 2
4.1.3 Lubricant . 3
4.2 Wire rope manufacture . 3
4.2.1 General . 3
4.2.2 Wire joints . 3
4.2.3 Preformation and postformation . 3
4.2.4 Construction. 3
4.2.5 Rope grade . 4
4.2.6 Wire finish. 4
4.2.7 Direction and type of wire rope lay . 4
4.2.8 Designation and classification .
...

INTERNATIONAL ISO
STANDARD 10425
Second edition
Steel wire ropes for the petroleum and
natural gas industries — Minimum
requirements and terms of acceptance
Câbles en acier pour les industries du pétrole et du gaz naturel —
Exigences minimales et conditions de réception
PROOF/ÉPREUVE
Reference number
ISO 10425:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 10425:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10425:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 2
4.1 Material . 2
4.1.1 Wire. 2
4.1.2 Core . 2
4.1.3 Lubricant . 3
4.2 Wire rope manufacture . 3
4.2.1 General . 3
4.2.2 Wire joints . 3
4.2.3 Preformation and postformation . 3
4.2.4 Construction. 3
4.2.5 Rope grade . 4
4.2.6 Wire finish. 4
4.2.7 Direction and type of wire rope lay . 4
4.2.8 Designation and classification .
...

ISO/PRF 10425:2023(E)
ISO/TC 105/WG 12
Secretariat: SAC
Date: 2023-06-1607-20
Steel wire ropes for the petroleum and natural gas industries — —
Minimum requirements and terms of acceptance
Câbles en acier pour les industries du pétrole et du gaz naturel — Exigences minimales et conditions de
réception
PRF stage

---------------------- Page: 1 ----------------------
ISO/PRF 10425:2023(E)
© ISO 20222023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ii © ISO 2022 – All rights reserved
 © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/PRF 10425:2023(E)
Contents
Foreword . v
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 2
4.1 Material . 2
4.1.1 Wire . 2
4.1.2 Core . 2
4.1.3 Lubricant. 3
4.2 Wire rope manufacture . 3
4.2.1 General . 3
4.2.2 Wire joints . 3
4.2.3 Preformation and postformation . 3
4.2.4 Construction . 3
4.2.5 Rope grade . 4
4.2.6 Wire finish . 4
4.2.7 Direction and type of wire rope lay . 4
4.2.8 Designation and classification . 5
4.3 Diameter . 5
4.3.1 General .
...