ISO 81400-4:2005/Cor 1:2005

Wind turbines — Part 4: Design and specification of gearboxes — Technical Corrigendum 1

This standard applies to gearboxes for wind turbines with power capacities ranging from40 kWto 2MW. It applies to all parallel axis, one stage epicyclic, and combined one stage epicyclic and parallel shaft enclosed gearboxes. The provisions made in this standard are based on field experience with wind turbines having the above power capacities and configurations. Guidelines of this standard may be applied to higher capacity wind turbines provided the specifications are appropriately modified to accommodate the characteristics of higher capacity wind turbines. Life requirements apply to wind turbines with a minimum design lifetime of 20 years.

Aérogénérateurs — Partie 4: Conception et spécifications relatives aux boîtes de vitesses — Rectificatif technique 1

Vetrne elektrarne – 4. del: Oblikovanje in določitev gonil – Tehnični popravek 1

General Information

• Status: Withdrawn
• Publication Date: 06-Dec-2005
• Withdrawal Date: 06-Dec-2005
• ICS: 21.200 - Gears
• ICS: 27.180 - Wind turbine energy systems
• Technical Committee: ISO/TC 60 - Gears
• Drafting Committee: ISO/TC 60 - Gears
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 05-Dec-2012
• Ref Project: SIST ISO 81400-4:2006/TC1:2006 - ISO 81400-4:2005/Cor 1:2005

Relations

• Revised: IEC 61400-4:2012 - Wind turbines — Part 4: Design requirements for wind turbine gearboxes
• Effective Date: 15-Apr-2008
• Corrects: ISO 81400-4:2005 - Wind turbines — Part 4: Design and specification of gearboxes
• Effective Date: 06-Jun-2022
• Child: ISO 81400-4:2005 - Wind turbines — Part 4: Design and specification of gearboxes
• Effective Date: 15-Apr-2008
• Child: SIST ISO 81400-4:2006 - Wind turbines -- Part 4: Design and specification of gearboxes
• Effective Date: 12-May-2008

Standards Content (Sample)

SIST ISO 81400-4:2006/TC1:2006SLOVENSKIdecember 2006
STANDARDVetrne elektrarne – 4. del: Oblikovanje in določitev gonil – Tehnični popravek 1Wind turbines - Part 4: Design and specification of
gearboxes - Technical Corrigendum 1©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST ISO 81400-4:2006/TC1:2006(en)ICS21.200; 27.180







ICS
21.200;
27.180 Ref. No. ISO 81400-4:2005/Cor.1:2005(E)©
ISO 2005 – All rights reserved Printed in Switzerland
INTERNATIONAL STANDARD ISO 81400-4:2005 TECHNICAL CORRIGENDUM 1 Published 2005-12-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
•
•
ORGANISATION INTERNATIONALE DE NORMALISATION
Wind turbines —
Part 4: Design and specification of gearboxes TECHNI
...