Diagrams for the chemical and petrochemical industry — Part 2: Graphical symbols

ISO 10628-2:2012 defines graphical symbols for the preparation of diagrams for the chemical and petrochemical industry. It is a collective application standard of the ISO 14617 series. ISO 10628-2:2012 does not apply to graphical symbols for electrotechnical diagrams; for these, see IEC 60617.

Schémas de procédé pour l'industrie chimique et pétrochimique — Partie 2: Symboles graphiques

L'ISO 10628-2:2012 définit des symboles graphiques pour l'élaboration de schémas de procédé pour l'industrie chimique et pétrochimique. L'ISO 10628-2:2012 est une norme d'application collective de la série ISO 14617. Elle n'est pas applicable aux symboles graphiques des schémas du domaine électrotechnique; pour ceux-ci, voir la CEI 60617.

General Information

Status
Published
Publication Date
03-Dec-2012
Current Stage
9093 - International Standard confirmed
Completion Date
14-Mar-2024
Ref Project

Relations

Buy Standard

Standard
ISO 10628-2:2012 - Diagrams for the chemical and petrochemical industry
English language
51 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10628-2:2012 - Schémas de procédé pour l'industrie chimique et pétrochimique
French language
51 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10628-2
First edition
2012-12-01
Diagrams for the chemical and
petrochemical industry —
Part 2:
Graphical symbols
Schémas de procédé pour l’industrie chimique et pétrochimique —
Partie 2: Symboles graphiques
Reference number
ISO 10628-2:2012(E)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 10628-2:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10628-2:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10628-2 was prepared by Technical Committee ISO/TC 10, Technical product documentation, Subcommittee
SC 10, Process plant documentation.
This first edition of ISO 10628-2, along with ISO 10628-1 (under preparation), cancels and replaces
ISO 10628:1997, which has been technically revised.
ISO 10628 consists of the following parts, under the general title Diagrams for the chemical and
petrochemical industry:
— Part 2: Graphical symbols
The following part is under preparation:
— Part 1: Specification of diagrams
© ISO 2012 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 10628-2:2012(E)
Diagrams for the chemical and petrochemical industry —
Part 2:
Graphical symbols
1 Scope
This part of ISO 10628 defines graphical symbols for the preparation of diagrams for the chemical and
petrochemical industry. It is a collective application standard of the ISO 14617 series.
This part of ISO 10628 does not apply to graphical symbols for electrotechnical diagrams; for these, see IEC 60617.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 10209, Technical product documentation — Vocabulary — Terms relating to technical drawings, product
definition and related documentation
ISO 14617 (all parts), Graphical symbols for diagrams
ISO 15519-1, Specification for diagrams for process industry — Part 1: General rules
ISO 81714 (all parts), Design of graphical symbols for use in the technical documentation of products
IEC 81714 (all parts), Design of graphical symbols for use in the technical documentation of products
3 Terms and definitions
For the purposes of this document, the definitions given in the ISO 14617 series and ISO 10209 apply.
4 Structure of graphical symbols
The graphical symbols are grouped according to functional and/or design features. See Table 1.
Table 1 — Subject groups
Group number Subject group
1 Vessels and tanks
2 Columns with internals
3 Heat exchangers
4 Steam generators, furnaces, recooling device
5 Cooling tower
6 Filters, liquid filters, gas filters
7 Screening devices, sieves and rakes
8 Separators
9 Centrifuges
10 Drier
© ISO 2012 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 10628-2:2012(E)
Table 1 (continued)
Group number Subject group
11 Crushing/Grinding machines
12 Mixers/Kneaders
13 Shaping machines – processing in vertical direction
14 Shaping machines – processing in horizontal direction
15 Liquid pumps
16 Compressors, vacuum pumps
...

NORME ISO
INTERNATIONALE 10628-2
Première édition
2012-12-01
Schémas de procédé pour l’industrie
chimique et pétrochimique —
Partie 2:
Symboles graphiques
Diagrams for the chemical and petrochemical industry —
Part 2: Graphical symbols
Numéro de référence
ISO 10628-2:2012(F)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 10628-2:2012(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2012
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord écrit
de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2012 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 10628-2:2012(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux de
normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales,
en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 2.
La tâche principale des comités techniques est d’élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins des comités membres votants.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de droits
de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de ne pas avoir
identifié de tels droits de propriété et averti de leur existence.
L’ISO 10628-2 a été élaborée par le comité technique ISO/TC 10, Documentation technique de produits,
sous-comité SC 10, Documentation pour les usines de traitement.
Cette première édition de l’ISO 10628-2, conjointement avec l’ISO 10628-1 (en cours d’élaboration), annule et
remplace l’ISO 10628:1997, qui a fait l’objet d’une révision technique.
L’ISO 10628 comprend les parties suivantes, présentées sous le titre général Schémas de procédé pour
l’industrie chimique et pétrochimique:
— Partie 2: Symboles graphiques
La partie suivante est en cours d’élaboration:
— Partie 1: Spécification des schémas de procédé
© ISO 2012 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
NORME INTERNATIONALE ISO 10628-2:2012(F)
Schémas de procédé pour l’industrie chimique et
pétrochimique —
Partie 2:
Symboles graphiques
1 Domaine d’application
La présente partie de l’ISO 10628 définit des symboles graphiques pour l’élaboration de schémas de procédé
pour l’industrie chimique et pétrochimique.
La présente partie de l’ISO 10628 est une norme d’application collective de la série ISO 14617.
Elle n’est pas applicable aux symboles graphiques des schémas du domaine électrotechnique; pour ceux-ci,
voir la CEI 60617.
2 Références normatives
Les documents suivants, en totalité ou en partie, sont référencés de manière normative dans le présent
document et sont indispensables pour son application. Pour les références datées, seule l’édition citée
s’applique. Pour les références non datées, la dernière édition du document de référence s’applique (y compris
les éventuels amendements).
ISO 10209, Documentation technique de produit — Vocabulaire — Termes relatifs aux dessins techniques, à
la définition de produits et à la documentation associée
ISO 14617 (toutes les parties), Symboles graphiques pour schémas
ISO 15519-1, Spécifications pour schémas de l’industrie de traitement — Partie 1: Règles générales
ISO 81714 (toutes les parties), Création de symboles graphiques utilisables dans la documentation
technique de produits
CEI 81714 (toutes les parties), Création de symboles graphiques utilisables dans la documentation
technique de produits
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans la série ISO 14617 et la série
ISO 10209 s’appliquent.
4 Structure des symboles graphiques
Les symboles graphiques sont regroupés en catégories selon leurs caractéristiques de fonction et/ou de
conception. Voir Tableau 1.
© ISO 2012 – Tous droits réservés 1

-------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.