iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO/TR 10064-2:1996/Cor 1:2001

(Corrigendum)

Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash - Technical Corrigendum 1

Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash - Technical Corrigendum 1

Code pratique de réception — Partie 2: Contrôle relatif aux écarts composés radiaux, au faux-rond, à l'épaisseur de dent et au jeu entre dents — Rectificatif technique 1

Valjasti zobniki - Smernice za meritve - 2. del: Meritve odstopkov pri radialnem preskušanju, odstopki krožnega teka, debeline zob in bočnega razstopa - Tehnični popravek 1

General Information

Status
Published
Publication Date
18-Apr-2001
ICS
21.200 - Gears
Technical Committee
ISO/TC 60 - Gears
Drafting Committee
ISO/TC 60/WG 2 - Accuracy of gears
Current Stage
6060 - International Standard published
Start Date
19-Apr-2001
Completion Date
27-Dec-2025
Ref Project
SIST ISO/TR 10064-2:1998/TC 1:2002 - Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash - TECHNICAL CORRIGENDUM 1

Relations

Corrects
ISO/TR 10064-2:1996 - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
Effective Date
06-Jun-2022
Child
SIST ISO/TR 10064-2:1998 - Cylindrical gears - Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
Effective Date
12-May-2008
Child
ISO/TR 10064-2:1996 - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
Effective Date
15-Apr-2008
ISO/TR 10064-2:1998/TC 1:2002ISO/TR 10064-2:1998/TC 1:2002
PreviousNext
Corrigendum
ISO/TR 10064-2:1998/TC 1:2002
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Frequently Asked Questions

ISO/TR 10064-2:1996/Cor 1:2001 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash - Technical Corrigendum 1". This standard covers: Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash - Technical Corrigendum 1

Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash - Technical Corrigendum 1

ISO/TR 10064-2:1996/Cor 1:2001 is classified under the following ICS (International Classification for Standards) categories: 21.200 - Gears. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO/TR 10064-2:1996/Cor 1:2001 has the following relationships with other standards: It is inter standard links to ISO/TR 10064-2:1996; is excused to SIST ISO/TR 10064-2:1998, ISO/TR 10064-2:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO/TR 10064-2:1996/Cor 1:2001 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cylindrical gears — Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash -
TECHNICAL CORRIGENDUM 121.200GonilaGearsICS:Ta slovenski standard je istoveten z:ISO/TR 10064-2:1996/Cor 1:2001SIST ISO/TR 10064-2:1998/TC 1:2002en01-julij-2002SIST ISO/TR 10064-2:1998/TC 1:2002SLOVENSKI
STANDARD
ICS21.200Ref.No.ISO/TR10064-2:1996/Cor.1:2001(E)©ISO2001–AllrightsreservedPrintedinSwitzerlandTECHNICALREPORTISO/TR10064-2:1996TECHNICALCORRIGENDUM1Published2001-04-15INTERNATIONALORGANIZATIONFORSTANDARDIZATIONМЕЖДУНАРОДНАЯОРГАНИЗАЦИЯПОСТАНДАРТИЗАЦИИORGANISATIONINTERNATIONALEDENORMALISATIONCylindricalgears—Codeofinspectionpractice—Part2:Inspectio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 21771-2:2025(Main)
Cylindrical involute gears and gear pairs - Part 2: Calculation and measurement of tooth thickness and backlash

This document establishes the calculation procedures for determining specification limits for external and internal cylindrical involute gearing with constant gear ratio when the desired tooth thickness is known. It also shows the relationships between backlash and the tooth thickness, centre distance, and tooth deviations in a pinion and gear mesh. This document applies to the following types of gears: - external and internal parallel axis cylindrical involute spur and helical gears; - involute worms and crossed axis gears; - spur and helical racks; - involute spur and helical sector gears. The formulae in this document apply to gears of all sizes and materials, and to all manufacturing methods. This document does not provide guidance on selecting the tooth thickness or the tolerance on the thickness.

  • Standard
    140 pages
    English language
    sale 15% off
  • Standard
    156 pages
    French language
    sale 15% off
ISO
IEC 61400-4:2025(Main)
Wind energy generation systems - Part 4: Design requirements for wind turbine gearboxes

This document is applicable to enclosed speed increasing gearboxes for horizontal axis wind turbine drivetrains with a power rating in excess of 500 kW. This document applies to newly designed gearboxes for wind turbines installed onshore or offshore. The technical requirements given in this document are not intended for repaired or refurbished gearboxes, or for the extension of the service life beyond the design life. This document provides requirements and guidance on the analysis of the wind turbine loads in relation to the design of the gear and gearbox elements. The gearing elements covered by this document include such gears as spur, helical or double helical and their combinations in parallel and epicyclic arrangements in the main power path. This document does not apply to power take off (PTO) gears. This document includes requirements, design recommendations, and rating of gearboxes with rolling bearings, plain bearings, or combinations of both bearing types. Also included are requirements and guidance on the engineering of shafts, shaft hub interfaces, lubrication, wind turbine controller interface, and the gear case structure to achieve a design that is capable of withstanding the environment and operating conditions of a wind turbine. Requirements for dynamic analysis of the gearbox within the wind turbine system are specified for the purpose of identifying load levels exceeding the predictions of the global aeroelastic simulation. The analysis of noise transmission and emission (e.g. tonal emission at gear mesh frequencies) is not within the scope of this edition of the document. Further, this document provides requirements and guidance on gearbox design verification, prototype testing and production testing, as well as consideration of design for service and maintenance. A method for a systematic assessment of the design reliability of a gearbox design under reference operating conditions is specified in IEC TS 61400‑4-1[1]. This document is supported by two Technical Reports: IEC TR 61400‑4-2[2] provides additional information on lubrication of wind turbine drivetrains and IEC TR 61400‑4-3[3] contains explanatory notes and supportive information to the requirements specified in this document.

  • Draft
    96 pages
    French language
    sale 15% off
ISO
ISO 1328-2:2020(Main)
Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
SIST ISO 1328-2:2023

This document establishes a gear tooth classification system relevant to double flank radial composite deviations of individual cylindrical involute gears and sector gears. It specifies the appropriate definitions of gear tooth deviations, the structure of the gear tooth flank classification system, and the allowable values of the gear tooth deviations. It provides formulae to calculate tolerances for individual product gears when mated in double flank contact with a master gear. Tolerance tables are not included. This document is applicable to gears with three or more teeth that have reference diameters of up to 600 mm. This document does not provide guidance on gear design nor does it recommend tolerances.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
ISO
ISO/TR 10064-1:2019(Main)
Code of inspection practice - Part 1: Measurement of cylindrical gear tooth flanks
SIST-TP ISO/TR 10064-1:2020

This document supplements ISO 1328‑1:2013. It provides a code of practice dealing with measurements on flanks of individual cylindrical involute gears, i.e. with the measurement of pitch, profile, helix and tangential composite characteristics. It describes measuring equipment, provides advice for gear measuring methods and for the analysis of measurement results, and discusses the interpretation of results. Measurements using a double flank tester are not included (see ISO/TR 10064‑2). This document only applies to involute gears.

  • Technical report
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    88 pages
    English language
    sale 15% off
  • Technical report
    103 pages
    French language
    sale 15% off
ISO
ISO 1328-1:2013(Main)
Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth

ISO 1328-1:2013 establishes a tolerance classification system relevant to manufacturing and conformity assessment of tooth flanks of individual cylindrical involute gears. It specifies definitions for gear flank tolerance terms, the structure of the flank tolerance class system, and allowable values. ISO 1328-1:2013 provides the gear manufacturer and the gear buyer with a mutually advantageous reference for uniform tolerances.

  • Standard
    50 pages
    English language
    sale 15% off
  • Standard
    53 pages
    French language
    sale 15% off
ISO
IEC 61400-4:2012(Main)
Wind turbines - Part 4: Design requirements for wind turbine gearboxes

IEC 61400-4:2012(E) is applicable to enclosed speed increasing gearboxes for horizontal axis wind turbine drivetrains with a power rating in excess of 500 kW. This standard applies to wind turbines installed onshore or offshore. It Standard provides guidance on the analysis of the wind turbine loads in relation to the design of the gear and gearbox elements. The gearing elements covered by this standard include such gears as spur, helical or double helical and their combinations in parallel and epicyclic arrangements in the main power path. The standard is based on gearbox designs using rolling element bearings. Also included is guidance on the engineering of shafts, shaft hub interfaces, bearings and the gear case structure in the development of a fully integrated design that meets the rigours of the operating conditions. Lubrication of the transmission is covered along with prototype and production testing. Finally, guidance is provided on the operation and maintenance of the gearbox.

  • Standard
    146 pages
    English language
    sale 15% off
ISO
ISO/TR 10064-6:2009(Main)
Code of inspection practice - Part 6: Bevel gear measurement methods
SIST-TP ISO/TR 10064-6:2009

ISO/TR 10064-6:2009 provides information on measuring methods and practices of unassembled bevel and hypoid gears and gear pairs. It includes methods and practices, which permit the manufacturer and purchaser to conduct measuring procedures which are accurate and repeatable to a degree compatible with the specified tolerance grade of ISO 17485. Tolerances are given in Clause 5 of ISO 17485:2006, for calculating the maximum values allowed by the specific tolerance grade. Required and optional measuring methods are provided in Clause 6 of ISO 17485:2006. ISO/TR 10064-6:2009 applies to bevel gear components as defined in ISO 17485. It does not apply to enclosed gear unit assemblies, including speed reducers or increasers, gear motors, shaft mounted reducers, high speed units, or other enclosed gear units which are manufactured for a given power, speed, ratio or application.

  • Technical report
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    37 pages
    English language
    sale 15% off
  • Technical report
    40 pages
    French language
    sale 15% off
ISO
ISO/TR 10064-2:1996/Cor 2:2006(Corrigendum)
Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash - Technical Corrigendum 2
SIST-TP ISO/TR 10064-2:1998/TC 2:2006

Constitutes a code of practice dealing with inspection relevant to radial composite deviations, runout, tooth thickness and backlash of cylindrical involute gears; i.e. with measurements referred to double flank contact.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO/TR 10064-4:1998/Cor 1:2006(Corrigendum)
Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking - Technical Corrigendum 1
SIST-TP ISO/TR 10064-4:2002/TC 1:2006

Provides recommendations on measurement considerations for surface roughness and tooth contact pattern checking of gear flanks.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO/TR 10064-3:1996/Cor 1:2006(Corrigendum)
Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes - Technical Corrigendum 1
SIST-TP ISO/TR 10064-3:1998/TC 1:2006

Provides recommended values for dimensional deviations on blanks, centre distance and parallelism of axes of gears. Numerical values given in this document are not to be regarded as strict ISO quality criteria, but may serve as a guide for mutual agreements, for steel or iron components.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day