ISO 5491:2023
(Main)Vertiports — Infrastructure and equipment for vertical take-off and landing (VTOL) of electrically powered cargo unmanned aircraft systems (UAS)
Vertiports — Infrastructure and equipment for vertical take-off and landing (VTOL) of electrically powered cargo unmanned aircraft systems (UAS)
This document defines the requirements for constructing a vertiport. This document applies to vertiports of type A (micro) as defined in ISO 5015-2.
Vertiports — Infrastructure et équipements pour le décollage et l'atterrissage vertical (VTOL) des aéronefs cargo sans pilote (UAS) à propulsion électrique
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 5491
First edition
2023-06
Vertiports — Infrastructure and
equipment for vertical take-off and
landing (VTOL) of electrically powered
cargo unmanned aircraft systems
(UAS)
Vertiports — Infrastructure et équipements pour le décollage et
l'atterrissage vertical (VTOL) des aéronefs cargo sans pilote (UAS) à
propulsion électrique
Reference number
ISO 5491:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 5491:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 5491:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 3
5 Requirements for the vertiport, under the responsibility of the manufacturer .4
5.1 Design . 4
5.1.1 Functional requirements . 4
5.1.2 System reliability and conditions . 5
5.1.3 Accommodation of the cargo . 5
5.2 Ensuring safety . 6
5.2.1 System reliability . 6
5.3 Communication . 6
5.4 Log . 7
5.5 Quality control . 8
5.6 Instruction manual . 8
5.7 Ensuring safety . 9
6 Requirement for the VIS under the responsibility of the VIS SP .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.