Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence

This Technical Report identifies the quality related responsibilities and tasks included in the supervision of activities related to the welding of products and semi-finished products made of thermoplastic materials and provides guidelines to ensure the quality of the supervision.
The fundamental aspects of this Technical Report are the following:
—   definition of tasks and responsibilities;
—   definition of the required knowledge, skills and competence.
The plastic welding supervisor (PWS) should be employed by the organization involved in the welding activities.
This Technical Report applies to all thermoplastic welding processes.

Kunstostoffschweißaufsicht - Aufgaben, Verantwortungen, Wissen, Fähigkeiten und Kompetenz

Superviseur en soudage de matières plastiques - Missions, responsabilités, connaissances, qualifications et compétences

Nadzor plastike za varjenje - Naloge, odgovornosti, znanje, spretnosti in kompetence

To tehnično poročilo opredeljuje s kakovostjo povezane odgovornosti in opravila, vključena v nadzor dejavnosti, povezanih z varjenjem izdelkov in polizdelkov iz termoplastičnih materialov, ter navaja smernice za zagotavljanje kakovosti nadzora.
Temeljni vidiki tega tehničnega poročila so naslednji:
– opredelitev opravil in odgovornosti;
– opredelitev zahtevanega znanja, spretnosti in kompetenc.
Organizacija, vključena v dejavnosti varjenja, naj bi zaposlovala nadzornika za varjenje plastike. To tehnično poročilo se uporablja za vse termoplastične postopke varjenja.

General Information

Status
Withdrawn
Public Enquiry End Date
03-Jun-2015
Publication Date
08-Sep-2015
Withdrawal Date
07-Jan-2024
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Jan-2024
Due Date
28-Jan-2024
Completion Date
08-Jan-2024

Relations

Buy Standard

Technical report
TP CEN/TR 16862:2015
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTP FprCEN/TR 16862:2015
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 16862:2015
01-oktober-2015
Nadzor plastike za varjenje - Naloge, odgovornosti, znanje, spretnosti in
kompetence
Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence
Kunstostoffschweißaufsicht - Aufgaben, Verantwortungen, Wissen, Fähigkeiten und
Kompetenz
Superviseur en soudage de matières plastiques - Missions, responsabilités,
connaissances, qualifications et compétences
Ta slovenski standard je istoveten z: CEN/TR 16862:2015
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
SIST-TP CEN/TR 16862:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 16862:2015

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 16862:2015

TECHNICAL REPORT
CEN/TR 16862

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
July 2015
ICS 03.100.30; 25.160.10
English Version
Plastics welding supervisor - Task, responsibilities, knowledge,
skills and competence
Superviseur en soudage de matières plastiques - Missions, Kunstostoffschweißaufsicht - Aufgaben, Verantwortungen,
responsabilités, connaissances, qualifications et Wissen, Fähigkeiten und Kompetenz
compétences


This Technical Report was approved by CEN on 6 July 2015. It has been drawn up by the Technical Committee CEN/TC 249.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16862:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 16862:2015
CEN/TR 16862:2015 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Tasks and responsibilities . 7
4.1 General . 7
4.2 Pre-welding activities . 7
4.2.1 General . 7
4.2.2 Contract review. 7
4.2.3 Technical document review . 8
4.2.4 Materials and products . 8
4.2.5 Welding environment . 8
4.2.6 Equipment . 8
4.2.7 Welding personnel . 9
4.2.8 Testing activities . 9
4.2.9 Materials weldability .
...

SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 16862:2015
01-maj-2015
Nadzor plastike za varjenje - Naloge, odgovornosti, znanje, spretnosti in
kompetence
Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence
Kunstostoffschweißaufsicht - Aufgaben, Verantwortungen, Wissen, Fähigkeiten und
Kompetenz
Superviseur en soudage de matières plastiques - Missions, responsabilités,
connaissances, qualifications et compétences
Ta slovenski standard je istoveten z: FprCEN/TR 16862
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
kSIST-TP FprCEN/TR 16862:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TP FprCEN/TR 16862:2015

---------------------- Page: 2 ----------------------
kSIST-TP FprCEN/TR 16862:2015

TECHNICAL REPORT
FINAL DRAFT
FprCEN/TR 16862
RAPPORT TECHNIQUE

TECHNISCHER BERICHT

March 2015
ICS 03.100.30; 25.160.10
English Version
Plastics welding supervisor - Task, responsibilities, knowledge,
skills and competence
Superviseur en soudage de matières plastiques - Missions, Kunstostoffschweißaufsicht - Aufgaben, Verantwortungen,
responsabilités, connaissances, qualifications et Wissen, Fähigkeiten und Kompetenz
compétences


This draft Technical Report is submitted to CEN members for Technical Committee Approval. It has been drawn up by the Technical
Committee CEN/TC 249.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a Technical Report.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 16862:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TP FprCEN/TR 16862:2015
FprCEN/TR 16862:2015 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Tasks and responsibilities .7
4.1 General .7
4.2 Pre-welding activities .7
4.3 Activities during welding .9
4.4 Activities after welding .9
5 Competence . 10
5.1 General . 10
5.2 Knowledge . 10
5.3 Skills . 10
Bibliograph
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.