SIST EN 18007-3:2024
(Main)Electromagnetic pulse welding - Part 3: Qualification of welding operators and weld setters
Electromagnetic pulse welding - Part 3: Qualification of welding operators and weld setters
This document specifies a method to determine the capability of a manufacturer to use the electromagnetic pulse welding process for production of products of the specified quality. It specifies quality requirements but does not assign those requirements to any specific product or product group.
In this document, the term "aluminium" refers to aluminium and its alloys.
Schweißen und verwandte Verfahren - Elektromagnetisches Pulsschweißen - Teil 3: Qualifizierung der Bediener und Einrichter
Dieses Dokument legt die Anforderungen an die Qualifizierung der Bediener und Einrichter von Schweißein richtungen für das elektromagnetische Pulsschweißen (EMPW, en: electromagnetic pulse welding) fest.
Dieses Dokument gilt nicht für Personal, das ausschließlich das Be- und Entladen der automatischen Schweiß einrichtung ausführt.
Dieses Dokument ist anwendbar, wenn der Vertrag oder die Anwendungsnorm eine Eignungsprüfung der Bediener und Einrichter vorschreibt.
Soudage par impulsion électromagnétique - Partie 3 : Qualification des opérateurs soudeurs et des régleurs en soudage
Le présent document spécifie des exigences relatives à la qualification des opérateurs soudeurs et des régleurs en soudage pour le soudage par impulsion électromagnétique.
Le présent document ne s'applique pas au personnel effectuant exclusivement le chargement ou le déchargement de l'unité de soudage automatique.
Le présent document est applicable lorsque l'épreuve de qualification des opérateurs soudeurs et des régleurs en soudage est exigée par le contrat ou par la norme d'application.
Elektromagnetno utripno varjenje - 3. del: Kvalifikacija varilnih operaterjev in pomožnega osebja
Ta dokument določa metodo za ugotavljanje zmožnosti proizvajalca za uporabo elektromagnetnega utripnega varjenja pri proizvodnji izdelkov navedene kakovosti. Določa zahteve glede kakovosti, vendar teh zahtev ne omeji na določen izdelek oziroma skupino izdelkov.
V tem dokumentu se izraz »aluminij« navezuje na aluminij in njegove zlitine.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Elektromagnetno utripno varjenje - 3. del: Kvalifikacija varilnih operaterjev in
pomožnega osebja
Electromagnetic pulse welding - Part 3: Qualification of welding operators and weld
setters
Schweißen und verwandte Verfahren - Elektromagnetisches Pulsschweißen - Teil 3:
Qualifizierung der Bediener und Einrichter
Soudage par impulsion électromagnétique - Partie 3 : Qualification des opérateurs
soudeurs et des régleurs en soudage
Ta slovenski standard je istoveten z: EN 18007-3:2024
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 18007-3
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 25.160.01; 25.160.10
English Version
Electromagnetic pulse welding - Part 3: Qualification of
welding operators and weld setters
Soudage par impulsion électromagnétique - Partie 3 : Elektromagnetisches Pulsschweißen - Teil 3:
Qualification des opérateurs soudeurs et des régleurs Qualifizierung der Bediener und Einrichter
en soudage
This European Standard was approved by CEN on 7 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 18007-3:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Welding personnel . 6
4.1 General. 6
4.2 Electromagnetic pulse welding operator and weld setter . 6
4.3 Welding coordination personnel (supervisor) . 7
4.4 Essential variables and range of qualification . 7
4.4.1 General. 7
4.4.2 Electromagnetic pulse welding variant . 7
4.4.3 Welding equipment . 8
4.4.4 Parent and flyer materials . 8
4.5 Qualification methods . 8
4.5.1 Qualification based on a standard welding test . 8
4.5.2 Qualification based on a welding procedure test . 8
4.5.3 Qualification based on pre-production test or production test . 8
4.5.4 Qualification based on production sample test . 8
4.6 Test welds . 9
4.6.1 General. 9
4.6.2 Visual testing and acceptance levels . 9
4.6.3 Destructive testing . 9
4.6.4 Re-testing . 9
4.7 Test report . 9
5 Certificate . 10
5.1 General. 10
5.2 Period of validity . 10
5.2.1 Initial qualification . 10
5.2.2 Confirmation of the validity . 10
5.2.3 Prolongation of qualification . 10
5.2.4 Revocation of qualification . 10
Annex A (normative) Functional knowledge of the welding unit. 11
A.1 General. 11
A.2 Welding sequences and procedures . 11
A.3 Joint preparation . 11
A.4 Weld imperfections . 11
A.5 Welding operator/weld setter qualification. 11
A.6 Process operation . 11
Annex B (normative) Knowledge of welding technology . 13
B.1 General . 13
B.2 Requirements . 13
Annex C (informative) Qualification test certificate for electromagnetic pulse welding
operators/weld setter . 15
European foreword
This document (EN 18007-3:2024) has been prepared by Technical Committee CEN/TC 121 “Welding
and allied processes”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
The EN 18007 series of standards, under the general title Electromagnetic pulse welding, consists of the
following parts:
— Part 1: Welding knowledge, terminology and vocabulary,
— Part 2: Design of welded joints,
— Part 3: Qualification of welding operators and weld setters,
— Part 4: Specification and qualification of welding procedures,
— Part 5: Quality and inspection requirements.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
Electromagnetic pulse welding is an innovative solid-state welding technology that belongs to the group
of pressure welding processes and is based on the use of electromagnetic forces to deform, accelerate
and weld workpieces. No external heat source is used, the connection is only created by a high-velocity
impact.
The increasing use of the electromagnetic pulse welding process has created the need for a standard, to
ensure that the welding operations are carried out in the most effective manner and that appropriate
controls are performed on all aspects of the implementation.
To be effective, welded products should be free from problems in production and in service. To achieve
this goal, it is recommended to provide controls from the design phase through material selection, choice
of parameters, the fabrication itself, and inspection. For example, poor design can create serious and
costly difficulties in the workshop or in service. Incorrect process parameters and/or material selection
can result in welding defects. Welding procedures should be correctly formulated and approved to avoid
weld discontinuities. To ensure the manufacture of a quality product, management should understand
the causes of potential problems and implement appropriate inspection procedures and subsequent
quality measures. Supervision should be implemented to ensure that the specified quality is achieved.
1 Scope
This document specifies the requirements for the qualification of welding operators and also weld setters
for electromagnetic pulse welding.
This document does not apply to personnel exclusively performing loading or unloading of the automatic
welding unit.
This document is applicable when qualification testing of welding operators and weld setters is required
by the contract or by the application standard.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 18007-1, Electromagnetic pulse welding — Part 1: Welding knowledge, terminology and vocabulary
EN 18007-4:2024, Electromagnetic pulse welding — Part 4: Specification and qualification of welding
procedures
EN ISO 14731, Welding coordination — Tasks and responsibilities (ISO 14731)
EN ISO 14732, Welding personnel — Qualification testing of welding operators and weld setters for
mechanized and automatic welding of metallic materials (ISO 14732)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 18007-1 and EN ISO 14732
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at h
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.