Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly

This European Standard covers the manhole cover assembly and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard.
The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C including petrol, and which have no-sub-classification as toxic or corrosive.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für Einsteigeöffnungen

Diese Europäische Norm gilt für die Baugruppe Deckel für Einsteigeöffnungen und legt die Leistungs-anforderungen, Maße und Prüfungen fest, mit denen nachgewiesen werden kann, ob die Ausrüstung den Anforderungen dieser Norm entspricht.
Die in dieser Norm beschriebene Ausrüstung ist für flüssige Erdölerzeugnisse und andere gefährliche Güter der Klasse 3 (entzündbare Flüssigkeiten) des Europäischen Übereinkommens über die internationale Beför¬derung gefährlicher Güter auf der Straße (ADR) geeignet, deren Dampfdruck bei 50 °C höchstens 110 kPa beträgt (einschließlich Ottokraftstoff) und die nicht als giftig oder ätzend eingestuft sind.

Citernes pour le transport de matières dangereuses - Équipements de service pour citernes - Couvercle de trou d'homme

La présente Norme européenne s'applique aux couvercles de trou d’homme et spécifie les exigences de performance, les dimensions et les essais nécessaires pour vérifier la conformité du dispositif à la présente norme.
L’équipement spécifié par la présente norme convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR - Accord européen relatif au transport international des marchandises dangereuses par route - (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence) et qui n’appartiennent à aucune sous-classification des produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Sklop pokrova vstopne odprtine

Ta evropski standard zajema sklop pokrova vstopne odprtine ter določa zahteve glede zmogljivosti, dimenzije in preskuse, potrebne za preverjanje skladnosti opreme s tem evropskim standardom.
Oprema, ki jo določa ta standard, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR – Evropski sporazum o prevozu nevarnega blaga po cesti – (vnetljive tekočine), katerih parni tlak ne presega 110 kPa pri 50 °C, vključno z bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.

General Information

Status
Published
Public Enquiry End Date
01-Jun-2017
Publication Date
21-Oct-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Oct-2018
Due Date
13-Dec-2018
Completion Date
22-Oct-2018

Relations

Buy Standard

Standard
EN 13317:2018
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Sklop pokrova vstopne odprtineTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für EinsteigeöffnungenCiternes pour le transport de matières dangereuses - Équipements de service pour citernes - Couvercle de trou d'hommeTanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13317:2018SIST EN 13317:2018en,fr,de01-november-2018SIST EN 13317:2018SLOVENSKI
STANDARDSIST EN 13317:2003+A1:20071DGRPHãþD



SIST EN 13317:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13317
July
t r s z ICS
s uä u r râ
t uä r t rä t r Supersedes EN
s u u s yã t r r t ªA sã t r r xEnglish Version
Tanks for transport of dangerous goods æ Service equipment for tanks æ Manhole cover assembly Citernes destinées au transport de matières dangereuses æ Équipements de service pour citernes æ Couvercle de trou d 5homme
Tanks für die Beförderung gefährlicher Güter æ Bedienungsausrüstung von Tanks æ Baugruppe Deckel für Einsteigeöffnungen This European Standard was approved by CEN on
t u April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u u s yã t r s z ESIST EN 13317:2018



EN 13317:2018 (E) 2 Contents Page European foreword . 3 Introduction . 5 1 Scope. 6 2 Normative references . 6 3 Terms and definitions . 6 4 Functions . 7 5 Design characteristics . 7 5.1 Leak tightness . 7 5.1.1 Pressure tightness . 7 5.1.2 Drop test . 7 5.2 Temperature range . 7 5.3 Materials of construction . 7 5.4 Dimensional characteristics . 7 5.5 Electrical resistance . 8 6 Tests. 8 6.1 General . 8 6.2 Production tests . 8 6.2.1 General . 8 6.2.2 Seat tightness test . 8 6.3 Type tests . 9 6.3.1 General . 9 6.3.2 Seat tightness test . 9 6.3.3 Drop test . 9 7 Marking . 10 8 Installation, operating and maintenance instructions. 10 Annex A (normative)
Drop test apparatus . 11 Annex B (normative)
Dimensions of mounting bolt holes . 12 Annex C (normative)
Dimensions for bolted assembly . 13 Bibliography . 14
SIST EN 13317:2018



EN 13317:2018 (E) 3 European foreword This document (EN 13317:2018) has been prepared by Technical Committee CEN/TC 296, “Tanks for the transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall be withdrawn at the latest by January 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13317:2002+A1:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. The following significant changes were made in this edition of EN 13317 in comparison with the earlier one: — a statement to be included in the installation instructions regarding the requirements for attachment to the shell; — the keeping period for test results clarified; — drop test rig, (Annex A), dimensions of sand boxes improved; — Mounting dimensions, (Annex B), title change, contents amended and expanded into two annexes (Annex B and Annex C) for clarification. This European Standard has been submitted for reference into the technical annexes of the ADR [1]. Therefore, in this context the standards listed in the normative references and covering basic requirements of the ADR not addressed within the present standard are normative only when the standards themselves are referred to in the technical annexes of the ADR. This European Standard forms part of a coherent standards programme comprising the following standards: — EN 13081, Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler; — EN 13082, Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; — EN 13083, Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading; — EN 13308, Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve; — EN 13314, Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover; — EN 13315, Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler; — EN 13316, Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; SIST EN 13317:2018



EN 13317:2018 (E) 4 — EN 13317, Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly; — EN 14595, Tanks for transport of dangerous goods - Service equipment - Breather device; — EN 14596, Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve; — EN 16249, Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading; — EN 16257, Tanks for the transport of dangerous goods - Service equipment - Footvalve sizes other than 100 mm dia (nom); — EN 16522, Tanks for transport of dangerous goods - Service equipment for tanks - Flame arresters for breather devices. Annexes A, B and C are normative. This document includes a Bibliography. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13317:2018



EN 13317:2018 (E) 5 Introduction The manhole cover assembly, the subject of this standard, seals the manhole which gives access to the inside of the tank compartment for manufacturing, cleaning, and inspection, and forms an integral part of a loading, unloading or venting function. NOTE Cover plates used to seal
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.