Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly

This document covers the manhole cover assembly and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard.
The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für Einsteigeöffnungen

Diese Europäische Norm gilt für die Baugruppe Deckel für Einsteigeöffnungen und legt die Leistungs-anforderungen, Maße und Prüfungen fest, mit denen nachgewiesen werden kann, ob die Ausrüstung den Anforderungen dieser Norm entspricht.
Die in dieser Norm beschriebene Ausrüstung ist für flüssige Erdölerzeugnisse und andere gefährliche Güter der Klasse 3 (entzündbare Flüssigkeiten) des Europäischen Übereinkommens über die internationale Beför¬derung gefährlicher Güter auf der Straße (ADR) geeignet, deren Dampfdruck bei 50 °C höchstens 110 kPa beträgt (einschließlich Ottokraftstoff) und die nicht als giftig oder ätzend eingestuft sind.

Citernes pour le transport de matières dangereuses - Équipements de service pour citernes - Couvercle de trou d'homme

La présente Norme européenne s'applique aux couvercles de trou d’homme et spécifie les exigences de performance, les dimensions et les essais nécessaires pour vérifier la conformité du dispositif à la présente norme.
L’équipement spécifié par la présente norme convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR - Accord européen relatif au transport international des marchandises dangereuses par route - (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence) et qui n’appartiennent à aucune sous-classification des produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Sklop pokrova vstopne odprtine

Ta evropski standard zajema sklop pokrova vstopne odprtine ter določa zahteve glede zmogljivosti, dimenzije in preskuse, potrebne za preverjanje skladnosti opreme s tem evropskim standardom.
Oprema, ki jo določa ta standard, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR – Evropski sporazum o prevozu nevarnega blaga po cesti – (vnetljive tekočine), katerih parni tlak ne presega 110 kPa pri 50 °C, vključno z bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.

General Information

Status
Published
Publication Date
10-Jul-2018
Withdrawal Date
30-Jan-2019
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
03-Mar-2024
Completion Date
03-Mar-2024

Relations

Buy Standard

Standard
EN 13317:2018
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13317:2017
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Sklop pokrova vstopne odprtineTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für EinsteigeöffnungenCiternes pour le transport de matières dangereuses - Équipements de service pour citernes - Couvercle de trou d'hommeTanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13317:2018SIST EN 13317:2018en,fr,de01-november-2018SIST EN 13317:2018SLOVENSKI
STANDARDSIST EN 13317:2003+A1:20071DGRPHãþD



SIST EN 13317:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13317
July
t r s z ICS
s uä u r râ
t uä r t rä t r Supersedes EN
s u u s yã t r r t ªA sã t r r xEnglish Version
Tanks for transport of dangerous goods æ Service equipment for tanks æ Manhole cover assembly Citernes destinées au transport de matières dangereuses æ Équipements de service pour citernes æ Couvercle de trou d 5homme
Tanks für die Beförderung gefährlicher Güter æ Bedienungsausrüstung von Tanks æ Baugruppe Deckel für Einsteigeöffnungen This European Standard was approved by CEN on
t u April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u u s yã t r s z ESIST EN 13317:2018



EN 13317:2018 (E) 2 Contents Page European foreword . 3 Introduction . 5 1 Scope. 6 2 Normative references . 6 3 Terms and definitions . 6 4 Functions . 7 5 Design characteristics . 7 5.1 Leak tightness . 7 5.1.1 Pressure tightness . 7 5.1.2 Drop test . 7 5.2 Temperature range . 7 5.3 Materials of construction . 7 5.4 Dimensional characteristics . 7 5.5 Electrical re
...

SLOVENSKI STANDARD
oSIST prEN 13317:2017
01-maj-2017
Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Sklop
pokrova vstopne odprtine
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover
assembly
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks -
Baugruppe Deckel für Einsteigeöffnungen
Citernes destinées au transport de matières dangereuses - Équipements de service pour
citernes - Couvercle de trou d'homme
Ta slovenski standard je istoveten z: prEN 13317
ICS:
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
oSIST prEN 13317:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13317:2017

---------------------- Page: 2 ----------------------
oSIST prEN 13317:2017


DRAFT
EUROPEAN STANDARD
prEN 13317
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2017
ICS 13.300; 23.020.20 Will supersede EN 13317:2002+A1:2006
English Version

Tanks for transport of dangerous goods - Service
equipment for tanks - Manhole cover assembly
Citernes destinées au transport de matières Tanks für die Beförderung gefährlicher Güter -
dangereuses - Équipements de service pour citernes - Bedienungsausrüstung von Tanks - Baugruppe Deckel
Couvercle de trou d'homme für Einsteigeöffnungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 296.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13317:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13317:2017
prEN 13317:2017 (E)
Contents Page
European foreword .3
Introduction .4
1 Scope.5
2 Normative references .5
3 Terms and definitions .5
4 4 Functions .6
5 5 Design characteristics .6
5.1 Leak tightness .6
5.1.1 Pressure tightness .6
5.1.2 Drop test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.