SIST EN 13317:2003+A1:2007
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
This European Standard covers the manhole cover assembly and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard.
The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C including petrol, and which have no sub classification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für Einsteigeöffnungen
Diese Europäische Norm gilt für die Baugruppe Deckel für Einsteigeöffnungen und legt die Leistungs¬anforderungen, Maße und Prüfungen fest, mit denen nachgewiesen werden kann, ob die Ausrüstung den Anforderungen dieser Norm entspricht.
Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 des ADR Europäisches Übereinkommen über die internationale Beförderung gefährlicher Güter auf der Straße (entzündbare flüssige Stoffe) geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff) und die nicht als giftig oder ätzend eingestuft sind.
Citernes destinées au transport de matieres dangereuses - Équipements de service pour citernes - Couvercle de trou d'homme
Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Sklop pokrova vstopne odprtine
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Sklop pokrova vstopne odprtineTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für EinsteigeöffnungenCiternes destinées au transport de matieres dangereuses - Équipements de service pour citernes - Couvercle de trou d'hommeTanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13317:2002+A1:2006SIST EN 13317:2003+A1:2007en01-april-2007SIST EN 13317:2003+A1:2007SLOVENSKI
STANDARDSIST EN 13317:20031DGRPHãþD
SIST EN 13317:2003+A1:2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13317:2002+A1November 2006ICS 13.300; 23.020.10; 23.020.20 English VersionTanks for transport of dangerous goods - Service equipment fortanks - Manhole cover assemblyCiternes destinées au transport de matières dangereuses -Équipements de service pour citernes - Couvercle de troud'hommeTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - Baugruppe Deckel fürEinsteigeöffnungenThis European Standard was approved by CEN on 4 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13317:2002+A1:2006: ESIST EN 13317:2003+A1:2007
EN 13317:2002+A1:2006 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Functions.6 5 Design characteristics.6 5.1 Leak tightness.6 5.1.1 Pressure tightness.6 5.1.2 Drop test.6 5.2 Temperature range.6 5.3 Materials of construction.6 5.4 Dimensional characteristics.7 5.5 Electrical resistance.7 6 Tests.7 6.1 General.7 6.2 Production tests.7 6.2.1 General.7 6.2.2 Seat tightness test.7 6.2.3 Test results.8 6.3 Type tests.8 6.3.1 General.8 6.3.2 Seat tightness test.8 6.3.3 Drop test.8 6.3.4 Test results.9 7 Marking.9 8 Installation, operating and maintenance instructions.9 Annex A (normative)
Drop test apparatus.10 Annex B (normative)
Manhole cover assembly.11
SIST EN 13317:2003+A1:2007
EN 13317:2002+A1:2006 (E) 3 Foreword This document (EN 13317:2002+A1:2006) has been prepared by Technical Committee CEN /TC 296, "Tanks for transport of dangerous goods", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2007 and conflicting national standards shall be withdrawn at the latest by May 2007. This document includes Amendment 1, approved by CEN on 2006-10-04. This document supersedes EN 13317:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports the objectives of the framework Directives on Transport of Dangerous Goods. This European Standard has been submitted for reference into the RID and/or in the technical annexes of the ADR.
Therefore in this context the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselves are referred to in the RID and/or in the technical annexes of the ADR. This European Standard forms part of a coherent standards programme comprising the following standards: Tanks for transport of dangerous goods - Service equipment for tanks EN 13081, Vapour collection !deleted text" !adaptor" and coupler. EN 13082, Vapour transfer valve. EN 13083, !deleted text" !Adaptor" for bottom loading and unloading. !deleted text" EN 13308, Non-pressure balanced footvalve. EN 13314, Fill hole cover. EN 13315, Gravity discharge coupler. !deleted text" EN 13316, Pressure balanced footvalve. EN 13317, Manhole cover assembly. !deleted text" !EN 14595", Pressure and vacuum breather vent. !deleted text" !EN 14596" Emergency pressure relief valve. Annexes A and B are both normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13317:2003+A1:2007
EN 13317:2002+A1:2006 (E) 4 Introduction The manhole cover assembly, the subject of this standard, seals the manhole which gives access to the inside of the tank compartment for manufacturing, cleaning, and inspection, and forms an integral part of a loading, unloading or venting function. NOTE Cover plates used to seal manholes are not the subject of this standard. The manhole cover assembly, which comprises the manhole cover and gaskets and may include devices to secure it to the tank shell neckring, may also provide the mounting points for equipment such as: fill hole cover; pressure limiting device(s); level detection equipment; vapour transfer valve; pressure and vacuum breather vent. SIST EN 13317:2003+A1:2007
EN 13317:2002+A1:2006 (E) 5 1 Scope This European Standard covers the manhole cover assembly and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road – (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C including petr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.