SIST EN ISO 19115-3:2024
(Main)Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)
Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)
This document defines an integrated XML implementation of ISO 19115-1 and ISO 19115-2 by defining
the following artefacts:
— a set of XML schema required to validate metadata instance documents conforming to conceptual
model elements defined in ISO 19115-1 and ISO 19115-2; and
— a set of ISO/IEC 19757-3 (Schematron) rules that implement validation constraints in the ISO 19115-1
and ISO 19115-2 UML models that are not validated by the XML schema.
This document describes the procedure used to generate XML schemas from ISO geographic information
conceptual models related to metadata. The XML schemas are generated directly from the conceptual
UML model (8.5).
Geoinformation - Metadaten - Teil 3: XML Implementierungsschema für Metadaten-Grundsätze (ISO 19115-3:2023)
Information géographique - Métadonnées - Partie 3 : Mise en oeuvre par des schémas XML (ISO 19115-3:2023)
Le présent document définit une implémentation XML intégrée des normes ISO 19115-1 et ISO 19115-2 en précisant les artefacts suivants:
— un ensemble de schémas XML requis pour valider les documents d'instance de métadonnées conformes aux éléments de modèle conceptuel définis dans l'ISO 19115-1 et l'ISO 19115-2; et
— un ensemble de règles basées sur l'ISO/IEC 19757-3 (Schematron) qui, dans les modèles UML de l'ISO 19115-1 et l'ISO 19115-2, implémentent des contraintes de validation qui ne sont pas validées par le schéma XML.
Le présent document décrit la procédure utilisée pour générer des schémas XML à partir de modèles ISO conceptuels d'information géographique. Les schémas XML sont générés directement à partir du modèle UML conceptuel (8.5).
Geografske informacije - Metapodatki - 3. del: Izvajanje sheme XML za temeljne koncepte (ISO 19115-3:2023)
Ta dokument določa izvajanje integrirane sheme XML iz standardov ISO 19115-1 in ISO 19115-2 z opredelitvijo
naslednjih artefaktov:
– nabor shem XML, ki je zahtevan za preverjanje, ali so dokumenti primerkov metapodatkov skladni z elementi konceptualnega
modela, opredeljenimi v standardih ISO 19115-1 in ISO 19115-2; ter
– nabor pravil iz standarda ISO/IEC 19757-3 (Schematron), ki uvajajo omejitve preverjanja v modelih UML iz standardov ISO 19115-1 in ISO 19115-2, ki se ne preverjajo s shemo XML.
Ta dokument opisuje postopek, ki se uporablja za generiranje shem XML iz konceptualnih modelov geografskih informacij ISO, ki se navezujejo na metapodatke. Sheme XML so generirane neposredno iz konceptualnega modela UML (točka 8.5).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19115-3:2024
01-januar-2024
Geografske informacije - Metapodatki - 3. del: Izvajanje sheme XML za temeljne
koncepte (ISO 19115-3:2023)
Geographic information - Metadata - Part 3: XML schema implementation for
fundamental concepts (ISO 19115-3:2023)
Geoinformation - Metadaten - Teil 3: XML Implementierungsschema für Metadaten-
Grundsätze (ISO 19115-3:2023)
Information géographique - Métadonnées - Partie 3 : Mise en oeuvre par des schémas
XML (ISO 19115-3:2023)
Ta slovenski standard je istoveten z: EN ISO 19115-3:2023
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19115-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19115-3:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 19115-3:2024
EN ISO 19115-3
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 35.240.70
English Version
Geographic information - Metadata - Part 3: XML schema
implementation for fundamental concepts (ISO 19115-
3:2023)
Information géographique - Métadonnées - Partie 3 : Geoinformation - Metadaten - Teil 3: XML
Mise en oeuvre par des schémas XML (ISO 19115- Implementierungsschema für Metadaten-Grundsätze
3:2023) (ISO 19115-3:2023)
This European Standard was approved by CEN on 18 July 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19115-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19115-3:2024
EN ISO 19115-3:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19115-3:2024
EN ISO 19115-3:2023 (E)
European foreword
This document (EN ISO 19115-3:2023) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19115-3:2023 has been a
...
SLOVENSKI STANDARD
oSIST prEN ISO 19115-3:2022
01-april-2022
Geografske informacije - Metapodatki - 3. del: Izvajanje sheme XML za temeljne
koncepte (ISO/DIS 19115-3:2022)
Geographic information - Metadata - Part 3: XML schema implementation for
fundamental concepts (ISO/DIS 19115-3:2022)
Geoinformation - Metadaten - Teil 3: XML Implementierungsschema für Metadaten-
Grundsätze (ISO/DIS 19115-3:2022)
Information géographique - Métadonnées - Partie 3 : Mise en oeuvre par des schémas
XML (ISO/DIS 19115-3:2022)
Ta slovenski standard je istoveten z: prEN ISO 19115-3
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
oSIST prEN ISO 19115-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 19115-3:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 19115-3:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19115-3
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-01-27 2022-04-21
Geographic information — Metadata —
Part 3:
XML schema implementation for fundamental concepts
Information géographique — Métadonnées —
Partie 3: Mise en oeuvre par des schémas XML
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19115-3:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 19115-3:2022
ISO/DIS 19115-3:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 19115-3:2022
ISO/DIS 19115-3:2022(E)
Contents Page
Foreword .iv
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.2
4.1 Acronyms . 2
4.2 Namespaces . 3
5 C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.