Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020)

This international standard deals with all significant hazards, hazardous situations and events relevant to stationary multi-blade rip sawing machines, hereinafter referred to as “machines”, designed to cut solid wood and material with similar physical characteristics as wood, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.
This international standard does not apply to machines with vertical roller feed or vertical chain conveyor feed or machines designed to make the first rip cut on a log.
This international standard does not deal with specific hazards related to the combination of single machines with any other machine as part of a line.

Holzbearbeitungsmaschinen - Sicherheit - Teil 13: Mehrblattkreissägemaschinen für Längsschnitt mit Handbeschickung und/oder Handentnahme (ISO 19085-13:2020)

Dieses Dokument stellt Sicherheitsanforderungen und Maßnahmen für stationäre Mehrblattkreissägemaschinen für Längsschnitt mit Handbeschickung und/oder Handentnahme, nachfolgend als „Maschinen“ bezeichnet, zur Verfügung, die konstruiert sind zum Schneiden von Massivholz und Werkstoffen mit vergleichbaren physikalischen Eigenschaften wie Holz.
Es behandelt alle im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf die Maschinen zutreffen, wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet, eingestellt und gewartet werden, einschließlich der vernünftigerweise vorhersehbaren Fehlanwendung. Ferner wurden Transport, Zusammenbau, Demontage, Rückbau und Verschrottung berücksichtigt.
ANMERKUNG   Hinsichtlich zutreffender aber nicht signifikanter Gefährdungen, z. B. scharfe Kanten des Maschinengestells, siehe ISO 12100:2010.
Dieses Dokument behandelt nicht die spezifischen Gefährdungen im Zusammenhang mit der Kombination einer einzelnen Maschine mit irgendeiner anderen Maschine als Teil einer Anlage.
Es gilt nicht für Maschinen
—   bei denen alle Sägespindeln unterhalb der [Ebene der] Werkstückauflage angebracht sind;
—   die zur bestimmungsgemäßen Verwendung in potentiell explosiven Atmosphären vorgesehen sind;
—   die vor dem Datum seiner Veröffentlichung hergestellt wurden.

Machines à bois - Sécurité - Partie 13: Déligneuses multi-lames à chargement et/ou déchargement manuel (ISO 19085-13:2020)

Le présent document donne les exigences et mesures de sécurité pour les déligneuses multilames fixes, à chargement et/ou déchargement manuel, ci-après désignées «machines», conçues pour la coupe de bois massif et de matériau ayant des caractéristiques physiques similaires à celles du bois.
Il traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu'énumérés à l'Article 4, applicables aux machines lorsqu'elles sont utilisées, réglées et entretenues comme prévu et dans les conditions prévues par le fabricant, incluant une mauvaise utilisation raisonnablement prévisible. Les phases de transport, d'assemblage, de démontage, de mise hors service et de mise au rebut sont également prises en compte.
NOTE       Pour les phénomènes dangereux pertinents mais non significatifs, par exemple, les arêtes vives du bâti de la machine, voir l'ISO 12100:2010.
Le présent document ne traite pas des phénomènes dangereux spécifiques liés à la combinaison de machines simples avec toute autre machine comme une partie d'une ligne.
Il n'est pas applicable aux machines:
—          ayant tous les arbres porte-lames de scie montés sous le support/niveau de la pièce uniquement;
—          prévues pour une utilisation en atmosphère explosible;
—          fabriquées avant sa publication.

Lesnoobdelovalni stroji - Varnost - 13. del: Večlistne krožne žage za vzdolžni rez z ročnim podajanjem in/ali odvzemanjem (ISO 19085-13:2020)

General Information

Status
Published
Public Enquiry End Date
20-Jul-2017
Publication Date
04-Oct-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Jun-2020
Due Date
09-Aug-2020
Completion Date
05-Oct-2020

Relations

Buy Standard

Standard
EN ISO 19085-13:2020
English language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19085-13:2020
01-november-2020
Nadomešča:
SIST EN 1870-4:2012
Lesnoobdelovalni stroji - Varnost - 13. del: Večlistne krožne žage za vzdolžni rez z
ročnim podajanjem in/ali odvzemanjem (ISO 19085-13:2020)
Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual
loading and/or unloading (ISO 19085-13:2020)
Holzbearbeitungsmaschinen - Sicherheit - Teil 13: Mehrblattkreissägemaschinen für
Längsschnitt mit Handbeschickung und/oder Handentnahme (ISO 19085-13:2020)
Machines à bois - Sécurité - Partie 13: Déligneuses multi-lames à chargement et/ou
déchargement manuel (ISO 19085-13:2020)
Ta slovenski standard je istoveten z: EN ISO 19085-13:2020
ICS:
13.110 Varnost strojev Safety of machinery
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN ISO 19085-13:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19085-13:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 19085-13:2020


EN ISO 19085-13
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 13.110; 79.120.10 Supersedes EN 1870-4:2012
English Version

Woodworking machines - Safety - Part 13: Multi-blade rip
sawing machines with manual loading and/or unloading
(ISO 19085-13:2020)
Machines à bois - Sécurité - Partie 13: Déligneuses Holzbearbeitungsmaschinen - Sicherheit - Teil 13:
multi-lames à chargement et/ou déchargement manuel Mehrblattkreissägemaschinen für Längsschnitt mit
(ISO 19085-13:2020) Handbeschickung und/oder Handentnahme (ISO
19085-13:2020)
This European Standard was approved by CEN on 24 April 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-13:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19085-13:2020
EN ISO 19085-13:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19085-13:2020
EN ISO 19085-13:2020 (E)
European foreword
This document (EN ISO 19085-13:2020) has been prepared by Technical Committee ISO/TC 39
"Machine tools" in collaboration with Technical Committee CEN/TC 142 “Woodworking machines -
Safety” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by November 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1870-4:2012.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19085-13:2020 has been approved by CEN as EN ISO 19085-13:2020 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 19085-13:2020
EN ISO 19085-13:2020 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC
This European standard has been prepared under a Commission’s standardisation request "M/396
Mandate to CEN and Cenelec for standardisation in the field of machinery” to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive
2006/42/EC, compliance with the normative clauses of this standard given in Table ZA.1 confers,
within the limits of the scope of this standard, a presumption of conformity with the corresponding
essential requirements of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 2006/42/EC
The relevant Essential Requirements (ERs) of Clause(s)/sub-clause(s) Remarks/Notes
Directive 2006/42/EC of this EN
1.1.2 Principles of safety integration
a) fitted for its function Clause 5, 6, 7, 8
b) eliminate or reduce the risks, give measures, Clause 5, 6, 7, 8

inform
c) intended use and reasonably foreseeable misuse Clause 5, 6, 7, 8
d) constraints in use 7.5, 8.3
e) equipment 6.1, 8.3

1.1.3 Materials and products 6.2, 7.3
1.1.4 Lighting 8.3
1.1.5 Design of machinery to facilitate its handling 7.5

1.1.6 Ergonomics 7.5

1.1.7 Operating position 5.2
1.2.1 Safety and reliability of control systems 5.1, 5.6, 5.7, 5.8, 5.9, 5.12,
5.13, 6.5, 6.6, 7.7, 7.8
1.2.2 Control devices 5.2, 5.3, 5.4, 5.6, 5.7, 5.11,

5.13, 6.7.4.2, 8.3
1.2.3 Starting 5.3
1.2.4 Stopping 5.4, 5.5, 6.4
1.2.4.1 Normal stop 5.4.2
1.2.4.3 Emergency stop 5.4.4
1.2.5 Selection of control or operating mode 5.6
4

---------------------- Page: 6 ----------------------
SIST EN ISO 19085-13:2020
EN ISO 19085-13:2020 (E)
1.2.6 Failure of the power supply 5.8, 7.7, 7.8
1.3.1 Risk of loss of stability 6.1, 8.3
1.3.2 Risk of break-up during operation 6.2, 8.3
1.3.3 Risks due to falling or ejected objects 6.2, 6.3, 6.5, 6.8, 6.9, 8.3
1.3.4 Risk due to surfaces, edges or angles Not significant
1.3.7 Risks related to moving parts 6.5, 6.6, 6.7, 8.3
1.3.8 Choice of protection against risks related to 6.6, 6.7, 6.8
moving parts
1.3.8.1 Moving transmission parts 6.6.3
1.3.8.2 Moving parts involved in the process 6.6.2
1.3.9 Risk of uncontrolled movements 6.1.1
1.4.1 General requirements 6.9
1.4.2.1 Fixed guards 6.5.1
1.4.2.2 Interlocking movable guards 6.5.2
1.4.3 Special requirements for protective devices 6.5.3, 6.5.6
1.5.1 Electricity supply 7.4, 7.13
1.5.2 Static electricity 7.11
1.5.3 Energy supply other than electricity 7.7, 7.8
1.5.4 Errors of fitting 7.12
1.5.6 Fire 7.1
1.5.8 Noise 7.2
1.5.11 External radiation 7.9
1.5.12 Laser equipment 7.10
1.5.13 Emission of hazardous materials and 7.3
substances
1.6.1 Machinery maintenance 7.14, 8.3
1.6.2 Access to operating position and servicing 7.14, 8.3
points
1.6.3 Isolation of energy sources 7.13, 8.3
1.6.4 Operator intervention 7.14, 8.3
1.6.5 Cleaning of internal parts 7.14, 8.3
1.7.1 Information and warnings on the machinery 8.1, 8.2
1.7.2 Warning devices 8.1
1.7.3 Marking of machinery 8.2
1.7.4 Instructions 8.3
2.3 Machinery for working wood and analogous
5

---------------------- Page: 7 ----------------------
SIST EN ISO 19085-13:2020
EN ISO 19085-13:2020 (E)
materials
a) guiding 6.10, 6.11
b) ejection 6.9, 8.3
c) brake 5.5, 6.4
d) Accidental tool contact 8.3
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.

6

---------------------- Page: 8 ----------------------
SIST EN ISO 19085-13:2020
INTERNATIONAL ISO
STANDARD 19085-13
First edition
2020-05
Woodworking machines — Safety —
Part 13:
Multi-blade rip sawing machines with
manual loading and/or unloading
Machines à bois — Sécurité —
Partie 13: Déligneuses multi-lames à chargement et/ou
déchargement manuel
Reference number
ISO 19085-13:2020(E)
©
ISO 2020

---------------------- Page: 9 ----------------------
SIST EN ISO 19085-13:2020
ISO 19085-13:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 19085-13:2020
ISO 19085-13:2020(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 List of significant hazards . 4
5 Safety requirements and measures for controls . 6
5.1 Safety and reliability of control systems . 6
5.2 Control devices . 6
5.3 Start . 8
5.4 Safe stops . 8
5.4.1 General. 8
5.4.2 Normal stop . 8
5.4.3 Operational stop . 8
5.4.4 Emergency stop . 8
5.5 Braking function of tool spindles . 8
5.6 Mode selection . 8
5.6.1 General. 8
5.6.2 Pressure shoe/board cutting mode . 8
5.6.3 Cleaning mode. 9
5.6.4 Powered axial adjustment mode . 9
5.7 Spindle speed changing .10
5.7.1 Spindle speed changing by changing belts on the pulleys .10
5.7.2 Spindle speed changing by incremental speed change motor .10
5.7.3 Infinitely variable speed by frequency inverter .10
5.8 Failure of any power supply .10
5.9 Manual reset control .10
5.10 Enabling control .10
5.11 Machine moving parts limited speed monitoring .10
5.12 Time delay .10
5.13 Powered adjustments when guards are closed .10
6 Safety requirements and measures for protection against mechanical hazards .11
6.1 Stability .11
6.1.1 Stationary machines .11
6.1.2 Displaceable machines .11
6.2 Risk of break-up during operation .11
6.3 Tool holder and tool design.11
6.3.1 General.11
6.3.2 Spindle locking .11
6.3.3 Circular saw blade fixing device .11
6.3.4 Flanges dimensions for circular saw blades .11
6.4 Braking .11
6.4.1 Braking of tool spindles .11
6.4.2 Maximum run-down time .12
6.4.3 Brake release .12
6.5 Safeguard design .12
6.5.1 Fixed guards .12
6.5.2 Interlocking moveable guards .12
6.5.3 Hold-to-run control .12
6.5.4 Two-hand control .12
6.5.5 Electro-sensitive protective equipment (ESPE) .12
6.5.6 Pressure sensitive protective equipment (PSPE) .12
© ISO 2020 – All rights reserved iii

---------------------- Page: 11 ----------------------
SIST EN ISO 19085-13:2020
ISO 19085-13:2020(E)

6.6 Prevention of access to moving parts .12
6.6.1 General.12
6.6.2 Guarding of tools .13
6.6.3 Guarding of drives .13
6.6.4 Guarding of crushing and shearing zones .13
6.7 Impact hazard .14
6.8 Clamping devices .14
6.9 Measures against ejection .14
6.9.1 General.14
6.9.2 Guards materials and characteristics.14
6.9.3 Measures against ejection through the infeed opening .15
6.9.4 Measures against ejection through the outfeed opening .25
6.10 Work-piece support and guide .28
7 Safety requirements and measures for protection against other hazards .28
7.1 Fire . .28
7.2 Noise .28
7.2.1 Noise reduction at the design stage .28
7.2.2 Noise emission measurement .28
7.3 Emission of chips and dust .28
7.4 Electricity .28
7.4.1 General.28
7.4.2 Displaceable machines .28
7.5 Ergonomics and handling .28
7.6 Lighting .28
7.7 Pneumatics .29
7.8 Hydraulics .29
7.9 Electromagnetic compatibility .29
7.10 Laser .29
7.11 Static electricity .29
7.12 Errors of fitting .29
7.13 Isolation .29
7.14 Maintenance .29
8 Information for use .29
8.1 Warning devices .29
8.2 Marking .29
8.2.1 General.29
8.2.2 Additional marking .29
8.3 Instruction handbook .30
8.3.1 General.30
8.3.2 Additional information .30
Annex A (informative) Performance level required .31
Annex B (normative) Test for braking function .32
Annex C (normative) Stability test for displaceable machines .33
Annex D (normative) Impact test method for guards .34
Annex E (normative) Noise emission measurement for machines not in ISO 7960:1995 .35
Annex F (normative) Test for the anti-splinter system on machines with one chain conveyor .36
Bibliography .40
iv © ISO 2020 – All rights reserved

---------------------- Page: 12 ----------------------
SIST EN ISO 19085-13:2020
ISO 19085-13:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collabora
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.