SIST EN ISO 9455-17:2024
(Main)Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2024)
Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2024)
This document specifies a method of testing for deleterious effects that can arise from flux residues
after soldering or tinning test coupons. The test is applicable to type 1 and type 2 fluxes, as specified in
ISO 9454-1, in solid or liquid form, or in the form of flux-cored solder wire, solder preforms or solder paste
constituted with eutectic or near-eutectic tin/lead (Sn/Pb) or Sn95,5Ag3Cu0,5 or other lead-free solders as
agreed between user and supplier (see ISO 9453).
This test method is also applicable to fluxes for use with lead-containing and lead-free solders. However, the
soldering temperatures can be adjusted with agreement between tester and customer.
Flussmittel zum Weichlöten - Prüfverfahren - Teil 17: Bestimmung des Widerstandes der Oberflächenisolierung, Kammprüfung und elektrochemische Migrationsprüfung von Flussmittelrückständen (ISO 9455-17:2024)
Dieses Dokument legt ein Prüfverfahren zur Ermittlung von Schädigungen, die durch Flussmittelrückstände nach dem Weichlöten oder nach dem Verzinnen von Proben entstehen können, fest. Die Prüfung ist anwendbar für Flussmittel der Typen 1 und 2 nach ISO 9454 1 in fester oder flüssiger Form, in Lotdrähten, Lotformteilen oder Lotpasten in Verbindung mit eutektischem oder nahezu eutektischem Zinn/Blei (Sn/Pb) oder Sn95,5Ag3Cu0,5 oder anderen bleifreien Loten, wie zwischen Anwender und Lieferant vereinbart (siehe ISO 9453).
Dieses Prüfverfahren ist auch anwendbar für Flussmittel beim Einsatz von bleihaltigen und bleifreien Loten. Die Löttemperaturen können jedoch zwischen dem Kunden und dem Prüfer abgestimmt werden.
Flux de brasage tendre - Méthodes d'essai - Partie 17: Essai au peigne et essai de migration électrochimique de résistance d'isolement de surface des résidus de flux (ISO 9455-17:2024)
L'ISO 9455-17:2002 spécifie une méthode d'essai relative aux effets néfastes pouvant être provoqués par des résidus de flux après brasage tendre ou étamage de coupons d'essai. L'essai est applicable aux flux de type 1 et de type 2, tels que spécifiés dans l'ISO 9454-1, sous forme solide ou liquide, ou sous forme de fil d'apport à flux incorporé, de préformes ou de crème à braser constitués de métal d'apport étain/plomb (Sn/Pb) eutectique ou quasi-eutectique.
Cette méthode d'essai est également applicable aux flux à utiliser avec des métaux d'apport de brasage tendre sans plomb. Toutefois, les températures de brasage peuvent être convenues entre le responsable de l'essai et le client.
Talila za mehko spajkanje - Preskusne metode - 17. del: Preskus odpornosti površine izolacije z glavnikom in preskus elektrokemičnega prenosa talila (ISO 9455-17:2024)
Ta dokument določa preskusno metodo za škodljive učinke, ki lahko nastanejo zaradi talil po spajkanju ali kositranja preskusnih kuponov. Ta preskus se uporablja za talila tipa 1 in tipa 2, kot je določeno v standardu ISO 9454-1, v trdni ali tekoči obliki, ali v obliki varilne žice s talilnim jedrom ali paste za spajkanje, ki jo sestavljajo evtektične ali skoraj evtektične kositrne/svinčene (Sn/PB), Sn95,5Ag3Cu0,5 ali druge nesvinčene spajke, kot se dogovorita uporabnik in dobavitelj (glej tudi standard ISO 9453).
Ta preskusna metoda se prav tako uporablja za talila za uporabo s spajkami s svincem ali brez njega. Vseeno je mogoče temperature spajkanja prilagoditi ob dogovoru med preskuševalcem in stranko.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9455-17:2024
01-marec-2024
Nadomešča:
SIST EN ISO 9455-17:2006
Talila za mehko spajkanje - Preskusne metode - 17. del: Preskus odpornosti
površine izolacije z glavnikom in preskus elektrokemičnega prenosa talila (ISO
9455-17:2024)
Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test
and electrochemical migration test of flux residues (ISO 9455-17:2024)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 17: Bestimmung des Widerstandes der
Oberflächenisolierung, Kammprüfung und elektrochemische Migrationsprüfung von
Flussmittelrückständen (ISO 9455-17:2024)
Flux de brasage tendre - Méthodes d'essai - Partie 17: Essai au peigne et essai de
migration électrochimique de résistance d'isolement de surface des résidus de flux (ISO
9455-17:2024)
Ta slovenski standard je istoveten z: EN ISO 9455-17:2024
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-17:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9455-17:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 9455-17:2024
EN ISO 9455-17
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2024
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN ISO 9455-17:2006
English Version
Soft soldering fluxes - Test methods - Part 17: Surface
insulation resistance comb test and electrochemical
migration test of flux residues (ISO 9455-17:2024)
Flux de brasage tendre - Méthodes d'essai - Partie 17: Flussmittel zum Weichlöten - Prüfverfahren - Teil 17:
Essai au peigne et essai de migration électrochimique Bestimmung des Widerstandes der
de résistance d'isolement de surface des résidus de flux Oberflächenisolierung, Kammprüfung und
(ISO 9455-17:2024) elektrochemische Migrationsprüfung von
Flussmittelrückständen (ISO 9455-17:2024)
This European Standard was approved by CEN on 2 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-17:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9455-17:2024
EN ISO 9455-17:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9455-17:2024
EN ISO 9455-17:2024 (E)
European foreword
This document (EN ISO 9455-17:2024) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9455-17:2006.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.