SIST EN 40-5:2002

Lighting columns - Part 5: Requirements for steel lighting columns

This European Standard specifies requirements for steel lighting columns. It includes materials and conformity control. It applies to post top columns not exceeding 20 m height for post top lanterns and to columns with brackets not exceeding 18 m height for side entry lanterns.
This European Standard specifies performance related to the essential requirements of resistance to horizontal (wind) loads and performance under impact in support of the Essential Requirement No 4 Safety in use measured according to the corresponding test methods included in this European Standard or available in separate European Standards.
It provides for the evaluation of conformity of the products to this European Standard.

Lichtmaste - Teil 5: Anforderungen für Lichtmaste aus Stahl

Diese Europäische Norm legt Anforderungen für Lichtmaste aus Stahl fest. Sie umfasst auch Werkstoffe und den Konformitätsnachweis. Er gilt für gerade Maste für Aufsatzleuchten mit einer Höhe bis zu 20 m, sowie für Auslegermaste für Ansatz-leuchten mit einer Höhe bis zu 18 m.
Diese Europäische Norm legt Leistungsanforderungen im Hinblick auf die wesentliche Anforderung Widerstand gegen horizontale (Wind-)Lasten sowie gegen An-prall von Fahrzeugen (passive Sicherheit) in Unterstützung der wesentlichen Anforderung Nr. 4 Nutzungssicherheit fest, bestimmt nach den entsprechenden Prüfverfahren, die in dieser oder in separaten Normen enthalten sind.
Sie dient dem Nachweis der Konformität der Produkte mit dieser Europäischen Norm.

Candélabres d'éclairage public - Partie 5: Exigences pour les candélabres d'éclairage public en acier

La présente Norme européenne spécifie les exigences relatives aux candélabres d'éclairage public en acier. Elle inclut les matériaux et contrôles de conformité. Elle s'applique aux candélabres ne dépassant pas 20 m de haut, pour les luminaires montés au sommet, et aux candélabres a crosses ne dépassant pas 18 m de haut, pour les luminaires a entrée latérale.
Cette partie spécifie des performances liées a l'exigence essentielle de résistance aux charges horizontales (dues au vent) et au comportement en cas de choc en application de l'exigence essentielle n°4, Sécurité en utilisation, mesurées conformément aux méthodes d'essai correspondantes incluses dans la présente Norme européenne ou dans des Normes européennes distinctes.
Cette Norme européenne spécifie également l'évaluation de la conformité des produits.

Drogovi za razsvetljavo - 5. del: Zahteve za jeklene drogove za razsvetljavo

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 77.140.01 - Iron and steel products in general
• ICS: 93.080.40 - Street lighting and related equipment
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
• Ref Project: EN 40-5:2002 - Lighting columns - Part 5: Requirements for steel lighting columns

Relations

• Replaces: SIST EN 40-5:2001 - Lighting columns - Part 5: Specification for steel lighting columns
• Effective Date: 01-Sep-2002

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lighting columns - Part 5: Requirements for steel lighting columnsDrogovi za razsvetljavo - 5. del: Zahteve za jeklene drogove za razsvetljavoCandélabres d'éclairage public - Partie 5: Exigences pour les candélabres d'éclairage public en acierLichtmaste - Teil 5: Anforderungen für Lichtmaste aus StahlTa slovenski standard je istoveten z:EN 40-5:2002SIST EN 40-5:2002en93.080.4077.140.01ICS:SIST EN 40-5:20011DGRPHãþDSLOVENSKI
STANDARDSIST EN 40-5:200201-september-2002







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 40-5April 2002ICS 77.140.01; 93.080.40Supersedes EN 40-5:2000English versionLighting columns - Part 5: Requirements for steel lightingcolumnsCandélabres d'éclairage public - Partie 5: Exigences pourles candélabres d'éclairage public en acierLichtmaste - Teil 5: Anforderungen für Lichtmaste ausStahlThis European Standard was approved by CEN on 25 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 40-5:2002 E



EN 40-5:2002 (E)2ContentspageForeword31Scope42Normative references43Terms and definitions64Materials65Dimensions66Design and design verification67Welding78Joints79Protection against mechanical impact810Internal finish and sharp edges811Corrosion protection912Marking913Conformity control1014Acceptance criteria1415Re-testing1616Performance under vehicle impact – Passive safety16Annex A
(informative)
Corrosion protection measures for steel lighting columns17Annex B
(informative)
Recommendations for storage and installation19Annex C
(informative)
Bibliography20Annex D (normative)
Initial type tests21Annex ZA (informative)
Clauses of this European Standard addressing the provisions of theEU Construction Products Directive22



EN 40-5:2002 (E)3ForewordThis document EN 40-5:2002 has been prepared by Technical Committee CEN/TC 50"Lighting columns and spigots", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publicationof an identical text or by endorsement, at the latest by October 2002, and conflicting nationalstandards shall be withdrawn at the latest by January 2004.This document supersedes EN 40-5:2000.This document has been prepared under a mandate given to CEN by the EuropeanCommission and the European Free Trade Association and supports essential requirements ofthe EU Directive 89/106/EEC.For relationship with EU Directive 89/106EEC see informative annex ZA which is an integralpart of this document.In this standard the annexes A, B and C are informative and the annex D is normative.Wherever reference is made to classes, they are considered to be technical classes and notclasses according to 3(2) of the Construction Products Directive.This European Standard is the fifth in a series relating to specifications for lighting columns.At present the Parts of this standard are as follows:Part 1: Definitions and termsPart 2: General requirements and dimensionsPart 3: Design and verification3-1: Specification for characteristic loads3-2: Verification by testing3-3: Verification by calculationPart 4: Requirements for reinforced and prestressed concrete lighting columnsPart 5: Requirements for steel lighting columnsPart 6: Requirements for aluminium lighting columnsPart 7: Requirements for fibre reinforced polymer composite lighting columnsAccording to the CEN/CENELEC Internal Regulations, the national standards organizationsof the following countries are bound to implement this European Standard: Austria, Belgium,Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,



EN 40-5:2002 (E)4Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and theUnited Kingdom.1
ScopeThis European Standard specifies requirements for steel lighting columns. It includes materialsan
...