SIST EN 10028-1:2017

Flat products made of steels for pressure purposes - Part 1: General requirements

This European Standard specifies general technical delivery conditions for flat products for the construction of pressure equipment.
The general technical delivery conditions in EN 10021 also apply.
NOTE   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.

Flacherzeugnisse aus Druckbehälterstählen - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm legt die allgemeinen technischen Lieferbedingungen für im Druckbehälterbau verwendete Flacherzeugnisse fest.
Es gelten ebenfalls die allgemeinen technischen Lieferbedingungen nach EN 10021.
ANMERKUNG   Nach Veröffentlichung dieser Norm im EU Amtsblatt (OJEU) unter der Richtlinie 2014/68/EU ist die Annahme ihrer Konformität mit den grundlegenden Anforderungen (ESR) der Richtlinie 2014/68/EU auf die technischen Daten von Werkstoffen in dieser Europäischen Norm (Teil 1 und der entsprechende Teil der Normenreihe) beschränkt, und es darf nicht angenommen werden, dass damit die Eignung des Werkstoffs für ein bestimmtes Ausrüstungsteil festgestellt ist. Folglich müssen die in dieser Werkstoffnorm angegebenen technischen Parameter im Hinblick auf die konstruktiven Anforderungen dieses bestimmten Ausrüstungsteils ermittelt werden, um damit zu verifizieren, dass den ESR der Richtlinie 2014/68/EU entsprochen wird.

Produits plats en acier pour appareils à pression - Partie 1: Prescriptions générales

La présente Norme européenne spécifie les conditions techniques générales de livraison des produits plats utilisés dans la construction des appareils à pression.
Les conditions techniques générales de livraison spécifiées par la norme EN 10021 s’appliquent également.
NOTE   Dès lors que la présente Norme européenne est publiée dans le Journal Officiel de l’Union européenne (JOUE) en lien avec la Directive 2014/68/UE, la présomption de conformité avec les exigences essentielles de sécurité de la Directive 2014/68/UE se limite aux données techniques des matériaux spécifiées dans la présente Norme européenne (partie 1 et autres parties concernées de la série) et ne suppose pas l’adéquation des matériaux avec un appareil en particulier. Par conséquent, il doit être procédé à l’évaluation des données techniques spécifiées dans la présente norme de matériaux par rapport aux exigences concernant la conception de cet équipement spécifique, afin de vérifier que les exigences essentielles de sécurité de la Directive 2014/68/UE soient satisfaites.

Ploščati jekleni izdelki za tlačne posode - 1. del: Splošne zahteve

Ta evropski standard določa splošne tehnične dobavne pogoje za ploščate izdelke za konstrukcijo tlačne opreme.
Uporabljajo se tudi splošni tehnični dobavni pogoji v EN 10021.
OPOMBA:   Ko bo ta evropski standard objavljen v Uradnem listu Evropske unije (OJEU) v okviru Direktive 97/23/ES, bodo zagotovila o skladnosti z osnovnimi varnostnimi zahtevami (ESR) Direktive 97/23/ES omejena na tehnične podatke o materialih, navedene v tem evropskem standardu (1. delu in drugem ustreznem delu skupine), standard pa ne bo zagotavljal ustreznosti materiala za določen element opreme. Zato bo potrebno oceniti tehnične podatke, podane v tem standardu za materiale, glede na zahteve zasnove določenega elementa opreme, da se zagotovi, da so spoštovane osnovne varnostne zahteve Direktive 97/23/ES.

General Information

• Status: Published
• Public Enquiry End Date: 08-Feb-2015
• Publication Date: 08-Aug-2017
• ICS: 77.140.30 - Steels for pressure purposes
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Aug-2017
• Due Date: 12-Oct-2017
• Completion Date: 09-Aug-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Directive: EUR-PUB - European Union - Public Standards
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10028-1:2017 - Flat products made of steels for pressure purposes - Part 1: General requirements

Relations

• Replaces: SIST EN 10028-1:2008+A1:2009/AC:2010 - Flat products made of steels for pressure purposes - Part 1: General requirements
• Effective Date: 02-Aug-2017
• Replaces: SIST EN 10028-1:2008+A1:2009 - Flat products made of steels for pressure purposes - Part 1: General requirements
• Effective Date: 02-Aug-2017
• Revised: SIST EN 10028-1:2008+A1:2009 - Flat products made of steels for pressure purposes - Part 1: General requirements
• Effective Date: 01-Jan-2015

Overview

EN 10028-1:2017 - Flat products made of steels for pressure purposes - Part 1: General requirements - is the CEN European Standard that sets the general technical delivery conditions for flat steel products intended for the construction of pressure equipment. It establishes the baseline requirements purchasers and manufacturers must agree on for dimensions, testing, inspection and documentation. The general delivery conditions in EN 10021 also apply. Annex ZA explains the relationship with Directive 2014/68/EU; note that presumption of conformity is limited to the technical data in this material standard and does not guarantee suitability for a specific item of equipment.

Key topics

This part of the EN 10028 series focuses on mandatory, practical delivery conditions and includes:

• Scope & applicability - flat products for pressure purposes and reference to the EN 10028 series.
• Tolerances on dimensions and calculation of mass (density 7.85 kg/dm3 for EN 10028‑2 to EN 10028‑6; stainless densities per EN 10088‑1).
• Classification and designation of steel grades (per EN 10020 and EN 10027 series).
• Information to be supplied by the purchaser (quantity, product type, dimensions, steel grade, delivery condition, inspection document, etc.).
• Requirements for steelmaking process, delivery condition, chemical composition, mechanical properties, surface condition and internal soundness.
• Inspection and testing: types of inspection documents (see EN 10204), test frequencies, sampling and retests.
• Referenced test methods: tensile, impact, chemical analysis, ultrasonic testing and other standard methods (EN/ISO series).
• Marking and documentation requirements and options (e.g., special testing or alternative tolerances).

Applications and users

EN 10028-1:2017 is practical for stakeholders involved in pressure equipment and material procurement:

• Steel producers and mills supplying flat products (plates, strips).
• Manufacturers of pressure vessels, boilers and piping, using the standard to specify material delivery conditions.
• Purchasers and procurement engineers who must define inspection documents, dimension tolerances and delivery conditions.
• Designers and conformity assessors who need to verify that material technical data meets the design requirements under Directive 2014/68/EU.
• Inspection bodies and testing laboratories implementing sampling, testing and certification per EN 10028-1 and its referenced methods.

Related standards

EN 10028-1 is the general-part of a series. Relevant related standards include:

• EN 10028-2 to EN 10028-7 (material-specific parts)
• EN 10021 (general technical delivery conditions)
• EN 10204 (inspection documents)
• EN/ISO test methods referenced for tensile, impact and ultrasonic testing (e.g., EN ISO 6892, EN ISO 148-1, EN 10160)

Using EN 10028-1:2017 helps ensure consistent material quality, clear procurement specifications and traceable inspection documentation for pressure‑purpose steel flat products.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YHFlacherzeugnisse aus Druckbehälterstählen - Teil 1: Allgemeine AnforderungenProduits plats en acier pour appareils à pression - Partie 1: Prescriptions généralesFlat products made of steels for pressure purposes - Part 1: General requirements77.140.50SROL]GHONLFlat steel products and semi-products77.140.30Jekla za uporabo pod tlakomSteels for pressure purposesICS:Ta slovenski standard je istoveten z:EN 10028-1:2017SIST EN 10028-1:2017en,fr,de01-oktober-2017SIST EN 10028-1:2017SLOVENSKI
STANDARDSIST EN 10028-1:2008+A1:2009/AC:2010SIST EN 10028-1:2008+A1:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10028-1
July
t r s y ICS
y yä s v rä u râ
y yä s v rä w r Supersedes EN
s r r t zæ sã t r r y ªA sã t r r {English Version
Flat products made of steels for pressure purposes æ Part
sã General requirements Produits plats en acier pour appareils à pression æ Partie
sã Prescriptions générales
Flacherzeugnisse aus Druckbehälterstählen æ Teil
sã Allgemeine Anforderungen This European Standard was approved by CEN on
s s May
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r r t zæ sã t r s y ESIST EN 10028-1:2017

Changes to the previous version EN 10028-1:2007+A1:2009. 21 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2014/68/EU . 22 SIST EN 10028-1:2017

specified low temperature properties — Part 5: Weldable fine grain steels, thermomechanically rolled — Part 6: Weldable fine grain steels, quenched and tempered — Part 7: Stainless steels According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 10028-1:2017

EN 10051:2010, Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy
EN 10079:2007, Definitions of steel products EN 10088-1:2014,
EN 10164:2004, Steel products with improved deformation properties perpendicular to the surface of the
EN 10168:2004, Steel products
EN 10204:2004, Metallic products
Types of inspection documents EN 10307:2001, Non-destructive testing
Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) EN ISO 148-1:2016, Metallic mater -1:2016) EN ISO 377:2013, -06-01) EN ISO 2566-1:1999, 2566- EN ISO 2566-2:1999, - EN ISO 3651-2:1998, Determination of resistance to iFerritic, austenitic and ferritic-- EN ISO 6892-1:2016,
1: Method of test at ambient -1:2016) EN ISO 6892-2:2011, -2:2011) EN ISO 9444-2:2010, Continuously hot- -2:2009) EN ISO 9445-1:2010, Continuously cold--1:2009) EN ISO 9445-2:2010, Continuously cold--2:2009) EN ISO 14284:2002, 4:1996) EN ISO 18286:2010, Hot-es on dimensions and shape
1: Narrow strip and cut lengths CEN/TR 10261,
3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10020:2000, EN 10079:2007 and the following apply. 3.1 annealing heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium Note 1 to entry: In English the term “box annealing” is used when the annealing is carried out in a sealed condition to minimize oxidation. 3.2 normalizing heat treatment consisting of austenitizing followed by air cooling 3.3 normalizing rolling rolling process in which the final deformation process is carried out in a certain temperature range leading to a material condition equivalent to that obtained after normalizing so that the specified mechanical properties are still met even after subsequent normalizing 3.4 thermomechanical rolling forming process in which the final deformation takes place within a certain range of temperatures leading to a material condition having certain properties which cannot be obtained or preserved by a single heat treatment Note 1 to entry: Thermomechanical rolling (symbol M) may include processes of increased cooling rates with or without tempering including self-tempering but excluding definitively direct quenching and tempering. 3.5 quenching operation after austenitizing which consists of cooling a workpiece more rapidly than in still air Note 1 to entry: Quenching includes direct quenching. 3.6 tempering heat treatment applied to a ferrous product, generally after quenching, or another heat treatment to bring the properties to the required level, and consisting of heating to specific temperatures (< Ac1) and soaking one or more times, followed by cooling at an appropriate rate SIST EN 10028-1:2017

to EN 10028–2:2017 to EN 10028–6:2017 Stainless steels according to
EN 10028–7:2016 Hot rolled plates
EN 10029 a EN ISO 18286 Continuously hot rolled strip Wide strip, sheet/plate cut from strip / slit strip EN 10051 c EN ISO 9444-2
Narrow strip, cut lengths EN 10048 EN 10048 or ISO 9444-1 Continuously cold rolled strip Wide strip, sheet/plate cut from strip – EN ISO 9445-2 b
Narrow strip, cut lengths – EN ISO 9445-1 a Unless otherwise agreed at the time of enquiry and order, class B as specified in EN 10029 shall apply to the tolerance on thickness of plates. b EN ISO 9445-2 contains options providing wider dimensional choice. c For plates in thicknesses t
3 mm cut from strip, EN 10029 may also be agreed. 5 Calculation of mass A density of 7,85 kg/dm3 shall be used as the basis for the calculation of the nominal mass from the nominal dimensions of all steels of EN 10028-2:2017 to EN 10028-6:2017. Calculations for density of stainless steels shall be based on density values given in EN 10088-1:2014, Annex E. 6 Classification and designation 6.1 Classification 6.1.1 The classification of the steel grades in accordance with EN 10020 is given in the specific parts of EN 10028. SIST EN 10028-1:2017
...