SIST EN 60254-2:2008

Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells

This part of IEC 60254 is applicable to lead-acid traction batteries used as power sources for electric propulsion. The object of the present standard is to specify: - the maximum external (overall) dimensions of traction battery cells, that is, the width, the height and the length; - the form of the marking of traction battery cell polarity and dimensions of corresponding symbols; - the basic dimensions of some commonly used traction battery terminals designed to connect output cables to the battery; - the dimensions of cells commonly used in Asia and North America.

Blei-Antriebsbatterien -- Teil 2: Maße von Zellen und Endpolen und Kennzeichnung der Polarität auf Zellen

Batteries d'accumulateurs de traction au plomb -- Partie 2: Dimensions des éléments et des bornes et indication de la polarité sur les éléments

La présente partie de la CEI 60254 concerne les batteries d'accumulateurs de traction au plomb utilisées comme source d'énergie pour la propulsion électrique. La présente norme a pour objet de spécifier:  - l'encombrement maximal des éléments des batteries de traction, c'est-à-dire la hauteur, la largeur et la longueur;  - la réalisation du marquage de la polarité sur les éléments des batteries de traction et les dimensions des symboles correspondants;  - les dimensions de base des bornes des batteries de traction d'usage courant prévues pour le raccordement des câbles de sortie à la batterie.  Cette quatrième édition annule et remplace la troisième édition parue en 1997 et son Amendement 1 (2000). Elle constitue une révision.

Svinec-kislinske vlečne baterije - 2. del: Mere členov in priključkov ter oznake polarnosti na členih (IEC 60254-2:2008)

General Information

• Status: Published
• Publication Date: 28-Apr-2008
• ICS: 29.220.20 - Acid secondary cells and batteries
• Technical Committee: ISCB - Secondary cells and batteries
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Apr-2008
• Due Date: 26-Jun-2008
• Completion Date: 29-Apr-2008
• Ref Project: EN 60254-2:2008 - Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells

Relations

• Replaces: SIST EN 60254-2:2001 - Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells
• Effective Date: 01-Apr-2011
• Replaces: SIST EN 60254-2:2001/A1:2002 - Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells
• Effective Date: 01-Apr-2011
• Replaces: SIST EN 60254-2:2001/A1:2002 - Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60254-2:2001 - Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60254-2:2001/A1:2002 - Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells
• Effective Date: 07-Jun-2022
• Replaces: SIST EN 60254-2:2001 - Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60254-2:2008
01-junij-2008
1DGRPHãþD
SIST EN 60254-2:2001
SIST EN 60254-2:2001/A1:2002
6YLQHFNLVOLQVNHYOHþQHEDWHULMHGHO0HUHþOHQRYLQSULNOMXþNRYWHUR]QDNH
SRODUQRVWLQDþOHQLK,(&
Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of
polarity on cells (IEC 60254-2:2008)
Blei-Antriebsbatterien - Teil 2: Maße von Zellen und Endpolen und Kennzeichnung der
Polarität auf Zellen (IEC 60254-2:2008)
Batteries d'accumulateur de traction au plomb - Partie 2: Dimensions des éléments et
des bornes et indication de la polarité sur les éléments (CEI 60254-2:2008)
Ta slovenski standard je istoveten z: EN 60254-2:2008
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
SIST EN 60254-2:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60254-2

NORME EUROPÉENNE
April 2008
EUROPÄISCHE NORM

ICS 29.220.20 Supersedes EN 60254-2:1997 + A1:2000


English version


Lead-acid traction batteries -
Part 2: Dimensions of cells and terminals
and marking of polarity on cells
(IEC 60254-2:2008)


Batteries d'accumulateurs  Blei-Antriebsbatterien -
de traction au plomb - Teil 2: Maße von Zellen
Partie 2: Dimensions des éléments und Endpolen und Kennzeichnung
et des bornes et indication der Polarität auf Zellen
de la polarité sur les éléments (IEC 60254-2:2008)
(CEI 60254-2:2008)




This European Standard was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60254-2:2008 E

---------------------- Page: 2 ----------------------

EN 60254-2:2008 - 2 -
Foreword
The text of document 21/668/FDIS, future edition 4 of IEC 60254-2, prepared by IEC TC 21, Secondary
cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60254-2 on 2008-03-01.
This European Standard supersedes EN 60254-2:1997 + A1:2000. The main modification concerns the
introduction of new dimensions.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60254-2:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60095-2 NOTE  Harmonized as EN 60095-2:1993 (modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60254-2:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60417 Data- Graphical symbols for use on equipment - -
base

---------------------- Page: 4 ----------------------

IEC 60254-2
Edition 4.0 2008-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Lead-acid traction batteries –
Part 2: Dimensions of cells and terminals and marking of polarity on cells

Batteries d’accumulateurs de traction au plomb –
Partie 2: Dimensions des éléments et des bornes et indication de la polarité sur
les éléments

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
L
CODE PRIX
ICS 29.220.20 ISBN 2-8318-9632-0

---------------------- Page: 5 ----------------------

– 2 – 60254-2 © IEC:2008
CONTENTS
FOREWORD.3

1 Scope and object.5
2 Normative references .5
3 Main dimensions of traction battery cells .5
3.1 Standard series .5
3.2 External dimensions .5
3.3 Cell range prevalent in Asia.6
3.4 Cell range prevalent in North America .6
4 Marking of polarity on traction battery cells and dimensions of corresponding
symbols.8
4.1 General provisions for marking of cell polarity .8
4.2 Form of marking .8
4.3 Symbols used for marking and their dimensions .8
5 Basic dimensions of traction battery terminals .9
5.1 General provisions for dimensions of battery terminals.9
5.2 Conical traction battery terminals .9
5.3 Bolted traction battery terminals .9

Bibliography.11

Figure 1 – Basic dimensions of conical traction battery terminals.9
Figure 2 – Basic dimensions of traction battery cable ends for bolted terminals .10

Table 1 – Main dimensions of traction battery cells .6
Table 2 – Main dimensions of traction battery cells prevalent in Asia .7
Table 3 – Main dimensions of traction battery cells (vented) prevalent in North America .8

---------------------- Page: 6 ----------------------

60254-2 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

LEAD-ACID TRACTION BATTERIES –

Part 2: Dimensions of cells and terminals
and marking of polarity on cells


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order t
...