iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 60747-17:2021/AC:2021

(Corrigendum)

Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation (IEC 60747-17:2020/COR1:2021)

Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation (IEC 60747-17:2020/COR1:2021)

IEC Corrected Version

Halbleiterbauelemente - Teil 17: Magnetische und kapazitive Koppler für Basisisolierung und verstärkte Isolierung (IEC 60747-17:2020/COR1:2021)

Dispositifs à semiconducteurs - Partie 17: Coupleur magnétique et capacitif pour l’isolation principale et renforcée (IEC 60747-17:2020/COR1:2021)

Polprevodniški elementi - 17. del: Magnetni in kapacitivni spojnik za osnovno in ojačeno izolacijo - Popravek AC (IEC 60747-17:2020/COR1:2021)

General Information

Status
Published
Publication Date
22-Feb-2021
ICS
31.080.01 - Semiconductor devices in general
Technical Committee
I11 - Imaginarni 11
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Feb-2021
Due Date
26-Apr-2021
Completion Date
23-Feb-2021
Ref Project
EN IEC 60747-17:2020/AC:2021-02 - Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation

Relations

Corrects
SIST EN IEC 60747-17:2021 - Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation (IEC 60747-17:2020)
Effective Date
09-Feb-2021

Buy Standard

EN IEC 60747-17:2021/AC:2021EN IEC 60747-17:2021/AC:2021
PreviousNext
Corrigendum
EN IEC 60747-17:2021/AC:2021
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60747-17:2021/AC:2021
01-april-2021
Polprevodniški elementi - 17. del: Magnetni in kapacitivni spojnik za osnovno in
ojačeno izolacijo - Popravek AC (IEC 60747-17:2020/COR1:2021)
Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and
reinforced insulation (IEC 60747-17:2020/COR1:2021)
Halbleiterbauelemente - Teil 17: Magnetische und kapazitive Koppler für Basisisolierung
und verstärkte Isolierung (IEC 60747-17:2020/COR1:2021)
Dispositifs à semiconducteurs - Partie 17: Coupleur magnétique et capacitif pour
l’isolation principale et renforcée (IEC 60747-17:2020/COR1:2021)
Ta slovenski standard je istoveten z: EN IEC 60747-17:2020/AC:2021-02
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN IEC 60747-17:2021/AC:2021 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60747-17:2021/AC:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 60747-17:2021/AC:2021


EUROPEAN STANDARD EN IEC 60747-
17:2020/AC:2021-02
NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2021

ICS 31.080.99

English Version
Semiconductor devices - Part 17: Magnetic and capacitive
coupler for basic and reinforced insulation
(IEC 60747-17:2020/COR1:2021)
Dispositifs à semiconducteurs - Partie 17: Coupleur Halbleiterbauelemente - Teil 17: Magnetische und
magnétique et capacitif pour l'isolation principale et kapazitive Koppler für Basisisolierung und verstärkte
renforcée Isolierung
(IEC 60747-17:2020/COR1:2021) (IEC 60747-17:2020/COR1:2021)
This corrigendum becomes effective on 12 February 2021 for incorporation in the English
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 63287-2:2023(Main)
Semiconductor devices - Guidelines for reliability qualification plans - Part 2: Concept of mission profile (IEC 63287-2:2023)
EN IEC 63287-2:2023

This part of IEC 63287 gives guidelines for the development of reliability qualification plans
using the concept of mission profile, based on the environmental conditioning and proposed
usage of the product. This document is not intended for military- and space-related applications.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63364-1:2023(Main)
Semiconductor devices - Semiconductor devices for IoT system - Part 1: Test method of sound variation detection (IEC 63364-1:2022)
EN IEC 63364-1:2023

This part of IEC 63364-1 provides terms, test method, and report of sound variation detection system based on IoT. It provides the evaluation method for each part of the sound variation detection system based on IoT in the block diagram, the characterization parameters, symbols, test setups and the conditions. In addition, this document defines the configuration items and criteria of standard space and firing situation for the quality evaluation measurement of sound field variation detection system with IoT.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60747-16-8:2023(Main)
Semiconductor devices - Part 16-8: Microwave integrated circuits - Limiters (IEC 60747-16-8:2022)
EN IEC 60747-16-8:2023

This part of IEC 60747 specifies the terminology, essential ratings and characteristics, and measuring methods of microwave integrated circuit limiters.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60747-16-7:2023(Main)
Semiconductor devices - Part 16-7: Microwave integrated circuits - Attenuators (IEC 60747-16-7:2022)
EN IEC 60747-16-7:2023

This part of IEC 60747 specifies the terminology, essential ratings and characteristics, and measuring methods of microwave integrated circuit attenuators.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-37:2023(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2022)
EN IEC 60749-37:2022

This part of IEC 60749 provides a test method that is intended to evaluate and compare drop
performance of surface mount electronic components for handheld electronic product
applications in an accelerated test environment, where excessive flexure of a circuit board
causes product failure. The purpose is to standardize the test board and test methodology to
provide a reproducible assessment of the drop test performance of surface-mounted
components while producing the same failure modes normally observed during product level
test.
This document aims at prescribing a standardized test method and reporting procedure. This is
not a component qualification test and is not meant to replace any system level drop test that
is sometimes used to qualify a specific handheld electronic product. The standard is not meant
to cover the drop test required to simulate shipping and handling-related shock of electronic
components or PCB assemblies. These requirements are already addressed in test methods
such as IEC 60749-10. The method is applicable to both area array and perimeter-leaded
surface mounted packages.
This test method uses an accelerometer to measure the mechanical shock duration and
magnitude applied which is proportional to the stress on a given component mounted on a
standard board. The test method described in IEC 60749-40 uses strain gauge to measure the
strain and strain rate of a board in the vicinity of a component. The customer specification states
which test method is to be used.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-10:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly (IEC 60749-10:2022)
EN IEC 60749-10:2022

This part of IEC 60749 is intended to evaluate devices in the free state and assembled to printed
wiring boards for use in electrical equipment. The method is intended to determine the
compatibility of devices and subassemblies to withstand moderately severe shocks. The use of
subassemblies is a means to test devices in usage conditions as assembled to printed wiring
boards. Mechanical shock due to suddenly applied forces, or abrupt change in motion produced
by handling, transportation or field operation can disturb operating characteristics, particularly
if the shock pulses are repetitive. This is a destructive test intended for device qualification

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-28:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - Device level (IEC 60749-28:2022)
EN IEC 60749-28:2022

This part of IEC 60749 establishes the procedure for testing, evaluating, and classifying devices and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined field-induced charged device model (CDM) electrostatic discharge (ESD).
All packaged semiconductor devices, thin film circuits, surface acoustic wave (SAW) devices, opto-electronic devices, hybrid integrated circuits (HICs), and multi-chip modules (MCMs) containing any of these devices are to be evaluated according to this document. To perform the tests, the devices are assembled into a package similar to that expected in the final application.
This CDM document does not apply to socketed discharge model testers. This document describes the field-induced (FI) method. An alternative, the direct contact (DC) method, is described in Annex J.
The purpose of this document is to establish a test method that will replicate CDM failures and provide reliable, repeatable CDM ESD test results from tester to tester, regardless of device type. Repeatable data will allow accurate classifications and comparisons of CDM ESD sensitivity levels.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-39:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2021)
EN IEC 60749-39:2022

This part of IEC 60749 details the procedures for the measurement of the characteristic
properties of moisture diffusivity and water solubility in organic materials used in the
packaging of semiconductor components.
These two material properties are important parameters for the effective reliability
performance of plastic packaged semiconductors after exposure to moisture and being
subjected to high-temperature solder reflow.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63244-1:2021(Main)
Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1 : General requirements and specifications (IEC 63244-1:2021)
EN IEC 63244-1:2021

This part of IEC 63244 provides general requirements and specifications of the semiconductor
devices for the performance and reliability evaluations of wireless power transfer and charging
systems. For the performance evaluations, this part covers various characterization parameters
and symbols, general system diagrams, and test setups and test conditions.
This document also describes classifications of the wireless power transfer technologies.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63287-1:2021(Main)
Semiconductor devices - Generic semiconductor qualification guidelines - Part 1: Guidelines for IC reliability qualification (IEC 63287-1:2021)
EN IEC 63287-1:2021

This part of IEC 63287 gives guidelines for reliability qualification plans of semiconductor
integrated circuit products. This document is not intended for military- and space-related
applications.
NOTE 1 The manufacturer can use flexible sample sizes to reduce cost and maintain reasonable reliability by this
guideline adaptation based on EDR-4708, AEC Q100, JESD47 or other relevant document can also be applicable if
it is specified.
NOTE 2 The Weibull distribution method used in this document is one of several methods to calculate the
appropriate sample size and test conditions of a given reliability project

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day