iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1937:2000

(Main)

Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures

Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures

This European Standard specifies the procedure for mixing hydraulic setting smoothing and/or levelling compounds with water and/or a liquid component as supplied by the manufacturer.

Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Standardmischverfahren

Diese Europäische Norm legt das Standardverfahren zum Mischen von Boden-Spachtelmassen mit Wasser und/oder einer vom Hersteller bereitgestellten flüssigen Komponente fest.

Méthode d'essai pour les mortiers de lissage et/ou de nivellement a prise hydraulique - Préparation des mélanges

La présente Norme européenne spécifie la méthode pour mélanger les mortiers de lissage et de nivellement a prise hydraulique avec de l'eau et/ou un composant liquide fourni par le fabricant d'adhésif.

Preskusna metoda za talne izravnalne in/ali livelirne mase za hidravlično nanašanje - Standardni postopki mešanja

General Information

Status
Published
Publication Date
30-Nov-2000
ICS
91.100.99 - Other construction materials
Technical Committee
IPMA - Polimer materials and products
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000
Ref Project
EN 1937:1999 - Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures

Buy Standard

EN 1937:2000EN 1937:2000
PreviousNext
Standard
EN 1937:2000
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDYOLþQRPrüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - StandardmischverfahrenMéthode d'essai pour les mortiers de lissage et/ou de nivellement a prise hydraulique - Préparation des mélangesTest method for hydraulic setting floor smoothing and/or levelling comp
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15274:2015(Main)
General purpose adhesives for structural assembly - Requirements and test methods
EN 15274:2015

This European Standard specifies requirements for adhesives intended for use in the creation and general assembly of load-bearing, structural elements used in civil engineering works and the construction of buildings. Other than the exceptions stated, it embraces all combinations of bonded materials, used to create or repair load-bearing elements.
It covers individual adhesives and special purpose kits comprising various combinations of adhesive types and components.
It includes test methods and methods of assessment.
The performance requirements in this standard may not be applicable to highly specialised applications in extreme environmental conditions, e.g. cryogenic use, nor do they cover specialised circumstances such as accidental impact, e.g. due to traffic or ice, or earthquake loading where specific performance requirements will apply.
The intended use is for internal and external construction elements and those cladding and covering elements (excluding ceramic tiles) specifically required, by regulatory authorities, to provide protection from fire in identified building zones, including escape routes.
This European Standard does not cover:
-   Prefabricated, bonded structural components;
-   Concrete bonded either to itself or steel or a material based on carbon fibre;
-   Wood, when bonded to itself to form a timber based, laminated beam [of the type known as a ‘Glulam’ beam] intended for use as a major structural, load bearing element;
-   Thermoplastics [e.g. polyethylene, polypropylene, polyamide and fluorinated polymers in general] unless they have been specifically prepared [usually through a specialised oxidative process] for bonded assembly on site;
-   Co-axial metallic assemblies comprising fasteners- threaded and otherwise, pipes and tubes;
-   Glass assemblies in structural glazing applications made using silicone adhesives;
-   Those structural elements that are permanently immersed in water.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13872:2004(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
EN 13872:2004

This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13409:2002(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
EN 13409:2002

This European Standard specifies the measurement of setting time of a hydraulic setting smoothing and/or levelling compound which is referred to as "smoothing and/or levelling compound", after mixing.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13408:2002(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
EN 13408:2002

This European Standard specifies a test method for the determination of bond strength between a cured hydraulic setting smoothing and/or levelling com-pound which is referred to as "smoothing and/or levelling compound", and a standard substrate.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12706:2000(Main)
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics
EN 12706:1999

This European Standard specifies a test method to assess the flow characteristics of a hydraulic setting floor smoothing and/or levelling compounds. Hydraulic setting floor smoothing and/or levelling compounds are referred to as "smoothing and/or levelling compound" when mixed with water and/or mixing liquid according to the manufacturers' instructions.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15274:2015(Main)
General purpose adhesives for structural assembly - Requirements and test methods
EN 15274:2015

This European Standard specifies requirements for adhesives intended for use in the creation and general assembly of load-bearing, structural elements used in civil engineering works and the construction of buildings. Other than the exceptions stated, it embraces all combinations of bonded materials, used to create or repair load-bearing elements.
It covers individual adhesives and special purpose kits comprising various combinations of adhesive types and components.
It includes test methods and methods of assessment.
The performance requirements in this standard may not be applicable to highly specialised applications in extreme environmental conditions, e.g. cryogenic use, nor do they cover specialised circumstances such as accidental impact, e.g. due to traffic or ice, or earthquake loading where specific performance requirements will apply.
The intended use is for internal and external construction elements and those cladding and covering elements (excluding ceramic tiles) specifically required, by regulatory authorities, to provide protection from fire in identified building zones, including escape routes.
This European Standard does not cover:
-   Prefabricated, bonded structural components;
-   Concrete bonded either to itself or steel or a material based on carbon fibre;
-   Wood, when bonded to itself to form a timber based, laminated beam [of the type known as a ‘Glulam’ beam] intended for use as a major structural, load bearing element;
-   Thermoplastics [e.g. polyethylene, polypropylene, polyamide and fluorinated polymers in general] unless they have been specifically prepared [usually through a specialised oxidative process] for bonded assembly on site;
-   Co-axial metallic assemblies comprising fasteners- threaded and otherwise, pipes and tubes;
-   Glass assemblies in structural glazing applications made using silicone adhesives;
-   Those structural elements that are permanently immersed in water.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16566:2014(Main)
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
EN 16566:2014

EN 16566 defines coating materials designed to cover all backgrounds and substrates in traditional materials or compliant with the standards in force, whether new or existing, bare or coated, absorbent or non-absorbent, smooth or rough, in order to prepare them to receive a paint or related system, or a bonded cover, whether specific or not. More generally intended to improve the surface appearance, they can also: - not be over-coated; - create a textured appearance or not; - be treated/coloured or not (pigments, wax, etc.). Exterior fillers are not intended as top coat. Interior coating materials with grain size over 1 mm are not covered by this European Standard. Fillers specifically intended for wooden and metal substrates are not covered by this European Standard. This European Standard complies with the general system for classification of water-borne coating materials and coating systems for interior walls and ceilings described in EN 13300. This European Standard complies with the general system for the description of coating materials and coating systems for exterior masonry and concrete described in EN 1062-1. The essential function of fillers covered by this European Standard is therefore a decorative function. Therefore, these fillers are considered here as preparatory and/or decorative fillers, of smooth or textured appearance.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13872:2004(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
EN 13872:2004

This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13579:2002(Main)
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation
EN 13579:2002

This European Standard specifies a test method to evaluate the effect of hydrophobic impregnation on the drying rate coefficient of impregnated specimens. The method primarily relates to the protection of concrete structures.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13409:2002(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
EN 13409:2002

This European Standard specifies the measurement of setting time of a hydraulic setting smoothing and/or levelling compound which is referred to as "smoothing and/or levelling compound", after mixing.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day