SIST EN 12706:2000

Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics

This European Standard specifies a test method to assess the flow characteristics of a hydraulic setting floor smoothing and/or levelling compounds. Hydraulic setting floor smoothing and/or levelling compounds are referred to as "smoothing and/or levelling compound" when mixed with water and/or mixing liquid according to the manufacturers' instructions.

Klebstoffe - Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung des Fließverhaltens

Diese Europäische Norm legt ein Prüfverfahren zur Beurteilung des Fließverhaltens von hydraulisch erhärtenden Boden-Spachtelmassen fest. Hydraulisch erhährtende Boden-Spachtelmassen werden im folgenden "Boden-Spachtelmassen" genannt, wenn diese mit Wasser oder Mischflüssigkeiten nach der Gebrauchsanweisung des Herstellers gemischt sind.

Adhésifs - Méthodes d'essai des mortiers de lissage et/ou d'égalisation des sols a prise hydraulique - Détermination des caractéristiques d'écoulement

La méthode d'essai décrite dans le présent projet de norme européenne permet d'évaluer les caractéristiques d'écoulement des mortiers de lissage et/ou d'égalisation des sols à base de liants hydrauliques. Les mortiers de lissage et/ou d'égalisation des sols à prise hydraulique sont considérés comme étant des "mortiers de lissage et/ou d'égalisation" lorsqu'ils sont mélangés avec de l'eau et/ou un liquide de mélange selon les instructions du fabricant.

Lepila - Preskusne metode za talne izravnalne in/ali livelirne mase za hidravlično nanašanje - Ugotavljanje raztekanja

General Information

• Status: Published
• Publication Date: 30-Nov-2000
• ICS: 83.180 - Adhesives
• ICS: 91.100.99 - Other construction materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2000
• Due Date: 01-Dec-2000
• Completion Date: 01-Dec-2000
• Ref Project: EN 12706:1999 - Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics

Overview

SIST EN 12706:2000 is a European Standard published by CEN that defines test methods for assessing the flow characteristics of hydraulic setting floor smoothing and/or levelling compounds. These compounds, also known as smoothing and levelling compounds, are materials mixed with water or other specified liquids according to manufacturers' instructions. The standard provides a reliable procedure to determine how these adhesives behave when applied, ensuring consistent quality and performance in construction projects.

This standard is critical for manufacturers, quality control laboratories, and construction professionals who require precise metrics to evaluate the flow performance of floor levelling products. Proper flow characteristics directly impact the ease of application, surface finish, and overall durability of flooring systems.

Key Topics

• Scope of Testing: The standard covers hydraulic setting compounds used for floor smoothing and levelling. It defines the conditions and requirements for the test method.
• Flow Characteristics Determination: Methods to measure the fluidity and spread of the compounds once mixed and ready for application.
• Material Preparation: Guidance on mixing procedures as per the manufacturer's instructions to maintain consistency and reliability of test results.
• Testing Procedures: Detailed steps are provided to ensure uniform testing conditions across different laboratories and manufacturers.
• Performance Evaluation: The test results assist in comparing different formulations and verifying compliance with product specifications related to flow behavior.

Applications

SIST EN 12706:2000 is widely applied in the construction and flooring industries, particularly for:

• Quality Control: Ensuring that hydraulic setting compounds meet defined flow standards before shipment or use.
• Product Development: Assisting manufacturers to optimize the composition of adhesives for improved ease of application and performance.
• Contractor Use: Helping contractors select suitable smoothing and levelling compounds that exhibit consistent and predictable flow properties on site.
• Compliance Verification: Facilitating adherence to building regulations and industry best practices related to flooring materials.
• Research & Innovation: Supporting research in enhancing floor levelling compound formulations with better flow characteristics for advanced construction techniques.

Related Standards

SIST EN 12706:2000 interacts with several other standards and guidelines that cover complementary aspects of adhesives and construction materials:

• EN 13813 - Screed materials and floor screeds - Properties and requirements.
• EN 196-1 - Methods of testing cement - Determination of strength.
• EN 1504 - Products and systems for the protection and repair of concrete structures.
• ISO 868 - Plastics and rubber - Determination of hardness by means of a durometer.

These related standards supply additional testing methods or performance criteria relevant to hydraulic floor smoothing and levelling compounds, ensuring comprehensive quality assurance in flooring applications.

---

Keywords: EN 12706, hydraulic setting compounds, floor smoothing compounds, levelling compounds, flow characteristics test, CEN standards, adhesive testing, construction materials, flooring adhesives, product quality control, European Standard.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe - Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung des FließverhaltensAdhésifs - Méthodes d'essai des mortiers de lissage et/ou d'égalisation des sols a prise hydraulique - Détermination des caractéristiques d'écoulementAdhesives - Test methods for hydraulic setting floor
...