Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002)

Sets requirements for the mechanical calculation of small craft hull design.

Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 2: Werkstoffe: Kernwerkstoffe für Verbundbauweise, eingebettete Werkstoffe (ISO 12215-2:2002)

Teil 2 dieser Internationalen Norm ist anwendbar auf Kernwerkstoffe für tragende Bauteile und auf in Verbundbauweise eingebettete Werkstoffe. Die Norm ist auf kleine Wasserfahrzeuge von einer Rumpflänge (LH) bis 24 m
entsprechend ISO 8666 anwendbar.
ANMERKUNG   Der Grund für die Erarbeitung dieser Internationalen Norm liegt darin, dass Kernwerkstoffe für Verbundbau-weise in kleinen Wasserfahrzeugen eine sorgfältige Auswahl aus dem vielfältigen Werkstoffangebot voraussetzen. Ferner muss ihre Verarbeitung nach bestimmten Regeln erfolgen, um ein gutes Langzeitverhalten bei den zu erwartenden Belastungen und
Umweltbedingungen zu erreichen

Petits navires - Construction de coques et échantillons - Partie 2: Matériaux: Matériaux d'âme pour les constructions de type sandwich, matériaux enrobés (ISO 12215-2:2002)

La présente partie de l'ISO 12215 spécifie les exigences relatives aux matériaux d'âme à usage de construction de structure ainsi qu'aux matériaux intégrés dans des constructions de type sandwich. Elle est applicable aux petits navires de longueur de coque ( LH ) inférieure ou égale à 24 m, conformément à l'ISO 8666.

Mala plovila – Konstrukcija trupa in zahtevane lastnosti – 2. del: Materiali: Materiali za sredico sendvič konstrukcije, vtisnjeni materiali (ISO 12215-2:2002)

General Information

Status
Withdrawn
Publication Date
30-Nov-2002
Withdrawal Date
10-Oct-2018
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Oct-2018
Due Date
03-Nov-2018
Completion Date
11-Oct-2018

RELATIONS

Buy Standard

Standard
SIST EN ISO 12215-2:2002
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 12215-2:2002
01-december-2002

0DODSORYLOD±.RQVWUXNFLMDWUXSDLQ]DKWHYDQHODVWQRVWL±GHO0DWHULDOL0DWHULDOL

]DVUHGLFRVHQGYLþNRQVWUXNFLMHYWLVQMHQLPDWHULDOL ,62

Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for

sandwich construction, embedded materials (ISO 12215-2:2002)
Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 2: Werkstoffe:
Kernwerkstoffe für Verbundbauweise, eingebettete Werkstoffe (ISO 12215-2:2002)

Petits navires - Construction de coques et échantillons - Partie 2: Matériaux: Matériaux

d'âme pour les constructions de type sandwich, matériaux enrobés (ISO 12215-2:2002)

Ta slovenski standard je istoveten z: EN ISO 12215-2:2002
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.080 ýROQL Small craft
SIST EN ISO 12215-2:2002 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12215-2:2002
---------------------- Page: 2 ----------------------
SIST EN ISO 12215-2:2002
EUROPEAN STANDARD
EN ISO 12215-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 47.080
English version
Small craft - Hull construction and scantlings - Part 2: Materials:
Core materials for sandwich construction, embedded materials
(ISO 12215-2:2002)

Petits navires - Construction de coques et échantillons - Kleine Wasserfahrzeuge - Rumpfbauweise und

Partie 2: Matériaux: Matériaux d'âme pour les constructions Dimensionierung - Teil 2: Werkstoffe: Kernwerkstoffe für

de type sandwich, matériaux enrobés (ISO 12215-2:2002) Verbundbauweise, eingebettete Werkstoffe (ISO 12215-

2:2002)
This European Standard was approved by CEN on 1 May 2002.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12215-2:2002 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12215-2:2002
EN ISO 12215-2:2002 (E)
CORRECTED 2002-06-19
Foreword

This document (ISO 12215-2:2002) has been prepared by Technical Committee ISO/TC 188

"Small craft", in collaboration with CMC.

This European Standard shall be given the status of a national standard, either by publication

of an identical text or by endorsement, at the latest by November 2002, and conflicting

national standards shall be withdrawn at the latest by November 2002.
This document has been prepared under a mandate given to CEN by the European

Commission and the European Free Trade Association, and supports essential requirements

of EU Directive(s).

For relationship with EU Directive(s), see informative annex ZB, which is an integral part of

this document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of

the following countries are bound to implement this European Standard: Austria, Belgium,

Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,

Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the

United Kingdom.
Endorsement notice

The text of the International Standard ISO 12215-2:2002 has been approved by CEN as a

European Standard without any modifications.

NOTE Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------
SIST EN ISO 12215-2:2002
EN ISO 12215-2:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications

This European Standard incorporates by dated or undated reference, provisions from other

publications. These normative references are cited at the appropriate places in the text and the

publications are listed hereafter. For dated references, subsequent amendments to or revisions

of any of these publications apply to this European Standard only when incorporated in it by

amendment or revision. For undated references the latest edition of the publication referred to

applies (including amendments).

NOTE Where an International Publication has been modified by common modifications,

indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 845 1988 Cellular plastics and rubbers - EN ISO 845 1995
Determination of apparent (bulk)
density
ISO 4589-1 1996 Plastics - Determination of burning EN ISO 4589-1 1999
behaviour by oxygen index - Part 1:
Guidance
ISO 4589-2 1996 Plastics - Determination of burning EN ISO 4589-2 1999
behaviour by oxygen index - Part 2:
Ambient-temperature test
ISO 4589-3 1996 Plastics - Determination of burning EN ISO 4589-3 1996
behaviour by oxygen index - Part 3:
Elevated-temperature test
---------------------- Page: 5 ----------------------
SIST EN ISO 12215-2:2002
EN ISO 12215-2:2002 (E)
Annex ZB
(informative)
Clauses of this European Standard addressing essential requirements
or other provisions of EU Directives

This European Standard has been prepared under a mandate given to CEN by the European

Commission and the European Free Trade Association and supports essential requirements

of EU Directive 94/25/EC.
WARNING: Other requirements and other EU Directive may be applicable to the
product(s) falling within the scope of this standard.

The following clauses of this standard, as detailed in Table ZB.1, are likely to support

requirements of Directive 94/25/EC.

Compliance with the clauses of this standard provides one means of conforming with the

specific essential requirements of the Directive concerned and associated EFTA regulations.

Table ZB.1 - Correspondence between this European Standard and EU Directives
Clauses/sub-clauses of Corresponding annexes/ Comments
this European Standard paragraphs of Directive
94/25/EC
All Clauses Annex 1, 3.1 The standard provides
requirements for workshop
and manufacturing.
---------------------- Page: 6 ----------------------
SIST EN ISO 12215-2:2002
INTERNATIONAL ISO
STANDARD 12215-2
First edition
2002-05-01
Small craft — Hull construction
and scantlings —
Part 2:
Materials: Core materials for sandwich
construction, embedded materials
Petits navires — Construction de coques et échantillons —
Partie 2: Matériaux: Matériaux d'âme pour les constructions de type
sandwich, matériaux enrobés
Reference number
ISO 12215-2:2002(E)
ISO 2002
---------------------- Page: 7 ----------------------
SIST EN ISO 12215-2:2002
ISO 12215-2:2002(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not

be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this

file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this

area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters

were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event

that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2002

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic

or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body

in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 12215-2:2002
ISO 12215-2:2002(E)
Contents Page

Foreword.....................................................................................................................................................................iv

1 Scope..............................................................................................................................................................1

2 Normative references....................................................................................................................................1

3 Sandwich core properties.............................................................................................................................2

4 Embedded materials — inserts ....................................................................................................................3

5 Owner’s manual.............................................................................................................................................3

Annex A (normative) Mechanical properties of some sandwich core materials..................................................4

© ISO 2002 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 12215-2:2002
ISO 12215-2:2002(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO

member bodies). The work of preparing International Standards is normally carried out through ISO technical

committees. Each member body interested in a subject for which a technical committee has been established has

the right to be represented on that committee. International organizations, governmental and non-governmental, in

liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted

by the technical committees are circulated to the member bodies for voting. Publication as an International

Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this par
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.