SIST EN 12881-2:2005+A1:2008

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

This part of EN 12881 describes a method of test for the assessment of fire propagation along a conveyor belt when the belt is exposed to a heat source.

Fördergurte - Brandtechnische Prüfungen - Teil 2: Brandstreckenprüfung

Dieser Teil der EN 12881 legt ein Prüfverfahren fest zur Bestimmung der Ausbreitung eines Feuers entlang
eines Fördergurtes, wenn der Gurt mit einer Wärmequelle ausgesetzt ist.

Courroies transporteuses - Essais de simulation d'inflammation - Partie 2: Essai au feu à grande échelle

La présente partie de l’EN 12881 décrit une méthode d’essai permettant d’évaluer la propagation d’un feu le long d’une courroie transporteuse lorsque celle-ci est exposée à une source de chaleur.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Požarnovarnostni preskusi - 2. del: Požarni preskus na velikem preskušancu

General Information

• Status: Published
• Publication Date: 12-May-2008
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-May-2008
• Due Date: 12-Jul-2008
• Completion Date: 13-May-2008
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 12881-2:2005+A1:2008 - Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

Relations

• Replaces: SIST EN 12881-2:2005 - Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
• Effective Date: 01-Sep-2010
• Consolidates: SIST EN 12881-2:2005 - Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
• Effective Date: 18-Jan-2023
• Consolidates: SIST EN 12881-2:2005 - Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire testHVNXãDQFXCourroies transporteuses - Essais de simulation d'inflammation - Partie 2: Essai au feu à grande échelleFördergurte - Brandtechnische Prüfungen - Teil 2: Brandstreckenprüfung53.040.20Deli za transporterjeComponents for conveyors13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:SIST EN 12881-2:2005+A1:2008en,frTa slovenski standard je istoveten z:EN 12881-2:2005+A1:200801-julij-2008SIST EN 12881-2:2005+A1:2008SLOVENSKI
STANDARD







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12881-2:2005+A1
April 2008 ICS 13.220.40; 53.040.20 Supersedes EN 12881-2:2005 English Version
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
Courroies transporteuses - Essais de simulation d'inflammation - Partie 2: Essai au feu à grande échelle
Fördergurte - Brandtechnische Prüfungen - Teil 2: Brandstreckenprüfung This European Standard was approved by CEN on 21 March 2005 and includes Amendment 1 approved by CEN on 21 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12881-2:2005+A1:2008: E



EN 12881-2:2005+A1:2008 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Apparatus.5 4 Preparation.5 4.1 Test piece.5 4.2 Temperature before the test.5 4.3 Number of tests.5 5 Procedure.6 6 Interpretation of results.6 7 Test report.6 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.9 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""".10



EN 12881-2:2005+A1:2008 (E) 3 Foreword This document (EN 12881-2:2005+A1:2008) has been prepared by Technical Committee CEN/TC 188 “Conveyor belts”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. This document supersedes EN 12881-2:2005. This document includes Amendment 1, approved by CEN on 2008-02-21. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document." The other part of EN 12281 is:
!EN 12881-1+A1:2008", Conveyor belts – Fire simulation flammability testing – Part 1: Propane burner tests According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 12881-2:2005+A1:2008 (E) 4 Introduction The method of test described in this part of EN 12881 is intended to provide an indication of the reaction of a conveyor belt when exposed to a large fire. The fire being simulated is one not caused by a local heat source but by materials around the conveyor belt which catch fire following exposure to other heat sources. Attention is drawn to the fact that in assessing the overall flammability characteristics of conveyor belting for specific installations, it is not sufficient to rely solely on any single method of test but consideration should also to be given to the individual site location.



EN 12881-2
...