iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 196-7:1995

(Main)

Methods of testing cement - Methods of taking and preparing samples of cement

Methods of testing cement - Methods of taking and preparing samples of cement

Quality. Rationalization.

Prüfverfahren für Zement - Verfahren für die Probenahme und Probenauswahl von Zement

Qualitaet. Rationalisierung.

Méthodes d'essais des ciments - Méthodes de prélevement et d'échantillonnage du ciment

Qualité. Rationalisation.

Metode preskušanja cementa - 7. del: Metode odvzemanja in priprave vzorcev cementa

General Information

Status
Withdrawn
Publication Date
31-Aug-1995
Withdrawal Date
12-Feb-2008
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CAA - Mineral binders and masonry
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
22-Jan-2008
Due Date
14-Feb-2008
Completion Date
13-Feb-2008
Directive
89/106/EEC - Construction products
Mandate
M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
Ref Project
EN 196-7:1989 - Methods of testing cement - Methods of taking and preparing samples of cement

Relations

Replaced By
SIST EN 196-7:2008 - Methods of testing cement - Part 7: Methods of taking and preparing samples of cement
Effective Date
01-Mar-2008

Buy Standard

EN 196-7:1995EN 196-7:1995
PreviousNext
Standard + National Annex and/or Foreword
EN 196-7:1995
Foreword and/or annex in Slovenian language, body of the standard in English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 196-7:1995EN 196-7:1995
PreviousNext
Standard + National Annex and/or Foreword
EN 196-7:1995
Foreword and/or annex in Slovenian language, body of the standard in English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 196-7
prva izdaja
STANDARD
september 1995
Metode presku{anja cementa - 7. del: Metode odvzemanja in
priprave vzorcev cementa (prevzet EN 196-7:1989 z metodo platnice)
Methods of testing cement - Part 7: Methods of taking and preparing
samples of cement
Méthodes d’essais des ciments - Partie 7: Méthodes de prélèvement et
d'échantillonage de ciment
Prüfverfahren für Zement - Teil 7: Verfahren für die Probenahme und
Probenauswahl von Zement
Deskriptorji: cement, presku{anje, vzor~enje, vzorci, pakiranje
Referen~na {tevilka
ICS 91.100.10
SIST EN 196-7:1995 (en)
Nadaljevanje na straneh od II do V in 1 do 23
© Standard je zalo`il in izdal Urad Republike Slovenije za standardizacijo in meroslovje pri Ministrstvu za znanost in tehnologijo.
Razmno`evanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 196-7 : 1995
UVOD
Standard SIST EN 196-7 (en), Metode presku{anja cementa - 7. del: Metode odvzemanja in
priprave vzorcev cementa, 1995, ima status slovenskega standarda in je z metodo platnice
prevzet evropski standard EN 196-7, Methods of testing cement - Part 7: Methods of taking
and preparing samples of cement, 1989, v angle{kem jeziku.
NACIONALNI PREDGOVOR
Evropski standard EN 196-7:1989 je pripravil tehni~ni odbor Evropske organizacije za
standardizacijo CEN/TC 51 Cement in apno.
Odlo~itev za prevzem tega standarda po metodi platnice je sprejela delovna skupina
USM/TC CAA/WG 1 Cement, potrdil pa tehni~ni odbor USM/TC CAA Cement, apno in
vlaknatocementni izdelki.
Ta slovenski standard je dne 1995-08-29 odobril direktor USM.
SLOVENSKI STANDARD SIST EN 196 ZA PRESKU[ANJE CEMENTA OBSEGA
NASLEDNJE DELE:
SIST EN 196-1:1995 (en) Metode presku{anja cementa - 1. del: Dolo~anje trdnosti
SIST EN 196-2:1995 (en) Metode presku{anja cementa - 2. del: Kemijska analiza
cementa
SIST EN 196-3:1995 (en) Metode presku{anja cementa - 3. del: Dolo~anje ~asa
vezanja in prostorninske obstojnosti
SIST ENV 196-4:1995 (en) Metode presku{anja cementa - 4. del: Kvantitativno dolo~anje
sestavin
SIST EN 196-5:1995 (en) Metode presku{anja cementa - 5. del: Dolo~anje pucolanske
aktivnosti za pucolanske cemente
SIST EN 196-6:1995 (en) Metode presku{anja cementa - 6. del: Dolo~anje finosti
SIST EN 196-7:1995 (en) Metode presku{anja cementa - 7. del: Metode odvzemanja in
priprave vzorcev cementa
SIST EN 196-21:1995 (en) Metode presku{anja cementa - 21. del: Dolo~anje koli~ine
kloridov, ogljikovega dioksida in alkalij v cementu
PREDHODNA IZDAJA
- JUS B.C1.012:1979 (sh) Na~in isporuke, pakovanja, sme{taja i uzimanja uzoraka
OSNOVA ZA IZDAJO STANDARDA
- Prevzem standarda EN 196-7:1989
OPOMBI
- Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v
SIST EN 196-7:1995 to pomeni “slovenski standard”.
- Uvod in nacionalni predgovor nista sestavni del standarda.
II

---------------------- Page: 2 ----------------------

SIST EN 196-7 : 1995
VSEBINA stran
1 Obseg in podro~je uporabe.4
2 Zveze z drugimi standardi.4
3 Definicije.5
4 Splo{no.7
5 Naprave za odvzemanje vzorcev.8
6 Postopki odvzemanja vzorcev in ukrepi pri izbranem postopku odvzemanja.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16908:2017+A1:2022(Main)
Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804
EN 16908:2017+A1:2022

The general scope of the core product category rules (PCR) is given in EN 15804:2012+A2:2019, Clause 1.
This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime.
In other respects, the scope is as in EN 15804:2012+A2:2019.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 459-2:2021(Main)
Building lime - Part 2: Test methods
EN 459-2:2021

This document describes the test methods for all building limes covered by EN 459-1.
This document specifies in Table 2 the methods used for the chemical analyses and the determination of physical properties of building limes.
This document describes primary methods of chemical analyses. The reference methods and, in certain cases, alternative methods in this document can be considered to be equivalent.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 197-5:2021(Main)
Cement - Part 5: Portland-composite cement CEM II/C-M and Composite cement CEM VI
EN 197-5:2021

This document deals with Portland-composite cement CEM II-C/M, not covered by EN 197-1, and a new type of Composite cement CEM VI, also not covered by EN 197-1, whose intended use is the preparation of concrete, mortar, grout etc.
This document does not cover:
-   common cement covered by EN 197-1;
-   very low heat special cement covered by EN 14216;
-   supersulfated cement covered by EN 15743;
-   calcium aluminate cement covered by EN 14647;
-   masonry cement covered by EN 413-1.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 14245:2020(Main)
Cement - Guidelines for the application of EN 197-2: Assessment and verification of constancy of performance
CEN/TR 14245:2020

This European Standard specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements to their corresponding product specification standards, including certification of constancy of performance by a product certification body.
The standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples, and for the tasks of the product certification body. It also provides rules for actions to be followed in the event of non-conformity, the procedure for the AVCP and requirements for dispatching centres.
In this European Standard, the word “cement” is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this European Standard and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 [1] ) should be used for the application of this European Standard.
This European Standard should be linked with Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1, EN 15743, in particular for the assignments of tasks to the manufacturer and to the product certification body.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.
Guidance
EN 197-2 deals with the evaluation of conformity of cements and binders that are submitted for certification. It deals in particular with cases where “further testing” of the product is undertaken, as is the case for attestation system 1+ under the Construction Products Regulation. The products for which EN 197-2 is applicable are: the common cement products and the low heat cements and the sulfate resisting cements, refer to EN 197-1, the very low heat special cements, refer to EN 14216, the supersulfated cements, refer to EN 15743, the calcium aluminate cements, refer to EN 14647, and the masonry cements, refer to EN 413 1.

  • Technical report
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 197-2:2020(Main)
Cement - Part 2: Assessment and verification of constancy of performance
EN 197-2:2020

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements, including certification of constancy of performance.
The document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and assessment of the performance of the cement, initial inspection of the manufacturing plant and of factory production control, continuing surveillance, assessment and evaluation of factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for dispatching centres and for depots.
In this document, the word "cement" is used to refer both to common cements as defined in EN 197-1 and to other cements and binders for which the relevant product specification standard makes reference to this document and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 [4] contain information for the application of this document.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1015-11:2020(Main)
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
EN 1015-11:2019

This European Standard specifies a method for determining the flexural and compressive strength of moulded mortar specimens.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17365:2019(Main)
Method for the determination of C3A in the clinker from cement analysis
CEN/TR 17365:2019

This document describes the analytical procedures used to determine the content of C3A in the clinker starting from a chemical analysis on cement. The method can be applied to CEM type I and IV for the determination of the requirement of C3A, as defined on EN 197-1.
This document describes two methods, traditional wet and XRF analysis (EN 196-2), which can be considered to be equivalent, in the scope of this CEN/TR 17365, for the determination of Al2O3, Fe2O3 and SO3.
The same methods are described in EN 196-2, but for the scope of this document, the X-ray fluorescence (XRF) is the preferred method to be used for the determination of Al2O3, Fe2O3 and SO3.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13454-2:2019(Main)
Binders for floor screeds based on calcium sulphate - Part 2: Test methods
EN 13454-2:2019

This European Standard describes the test methods for binders for floor screeds based on calcium sulphate specified in prEN 13454 1.
This European Standard describes the test methods for factory made mixtures for floor screeds based on calcium sulphate specified in EN 13813.
This European Standard describes reference test methods. If other than these methods and conditions are used, it is necessary to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 196-6:2019(Main)
Methods of testing cement - Part 6: Determination of fineness
EN 196-6:2018

This European Standard describes three methods of determining the fineness of cement.
The sieving method serves only to demonstrate the presence of coarse cement particles. This method is primarily suited to checking and controlling the production process.
The air-jet sieving method measures the retention on sieving and is suitable for particles which substantially pass a 2,0 mm test sieve. It may be used to determine the particle size distribution of agglomerates of very fine particles. This method may be used with test sieves in a range of aperture sizes, e.g. 63 μm and 90 μm.
The air permeability method (Blaine) measures the specific surface area (mass related surface area) by comparison with a reference material sample. The determination of the specific surface area serves primarily to check the consistency of the grinding process of one and the same plant. This method only enables a limited assessment of the properties of the cement in use.
NOTE   The air permeability method may not give significant results for cements containing ultrafine materials.
The methods are applicable to all the cements defined in EN 197.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 196-11:2019(Main)
Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
EN 196-11:2018

This European Standard specifies the apparatus and procedure for determining the heat of hydration of cements and other hydraulic binders at different test ages by isothermal conduction calorimetry.
This test procedure is intended for measuring the heat of hydration of cement up to 7 days in order to obtain data homogeneous with EN 196 8. Nevertheless this test duration may be critical for some apparatus, even if they can work properly at shorter test ages.
Contrary to EN 196 8 (solution method) this method gives the heat of hydration continuously over the time. Additionally, the heat flow versus time is given.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day