iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12068:1999

(Main)

Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials

Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials

This standard specifies the functional requirements and test methods for external organic coatings based on tapes or shrinkable materials to be used for corrosion protection of buried and immersed steel pipelines in conjunction with cathodic protection. It classifies coatings by increasing mechanical resistance and operating temperatures. Coatings for special installation conditions are also considered. A comprehensive classification of coatings in relation to functional requirements is defined.

Kathodischer Korrosionsschutz - Organische Umhüllungen für den Korrosionsschutz von in Böden und Wässern verlegten Stahlrohrleitungen im Zusammenwirken mit kathodischem Korrosionsschutz - Bänder und schrumpfende Materialien

Diese Europäische Norm legt die Funktionsanforderungen und Prüfverfahren für organische Umhüllungen aus Bändern oder schrumpfenden Materialien für den Korrosionsschutz in Böden oder Wässern verlegter Stahlrohrleitungen im Zusammenwirken mit kathodischem Korrosionsschutz fest. Sie klassifiziert Umhüllungen nach steigendem Widerstand gegen mechanische Belastung und nach Betriebstemperaturen. Umhüllungen für spezielle Verarbeitungsbedingungen sind ebenfalls berücksichtigt. Festgelegt ist eine umfassende Klasseneinteilung mit Bezug auf Funktionsanforderungen.

Protection cathodique - Revetements organiques extérieurs pour la protection contre la corrosion de tubes en acier enterrés ou immergés en conjonction avec la protection cathodique - Bandes et matériaux rétractables

La présente norme spécifie les exigences de caractéristiques fonctionnelles et les méthodes d'essais des revetements organiques extérieurs pour forme de bandes ou de matériaux rétractables pour la protection contre la corrosion des tubes en acier enterrés ou immergés en conjonction avec la protection cathodique. Elle classifie les revetements par ordre croissant de résistance mécanique et de températures de service. Elle concerne également les revetements pour conditions d'installation spéciales. Une classification claire est établie par rapport aux exigences fonctionnelles.

Katodna zaščita - Organske prevleke za zunanjo antikorozijsko zaščito skupaj s katodno zaščito na jeklenih cevovodih v zemlji ali v vodi - Toplotno skrčljivi trakovi in materiali

General Information

Status
Published
Publication Date
30-Sep-1999
ICS
23.040.10 - Iron and steel pipes
25.220.60 - Organic coatings
Technical Committee
IPKZ - Protection of metals against corrosion
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Oct-1999
Due Date
01-Oct-1999
Completion Date
01-Oct-1999
Directive
TP075 - Pravilnik o tehničnih pogojih za graditev, obratovanje in vzdrževanje plinovodov z delovnim tlakom nad 16 barov ter o pogojih za posege v območjih njihovih varovalnih pasov
Ref Project
EN 12068:1998 - Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials

Buy Standard

EN 12068:1999EN 12068:1999
PreviousNext
Standard
EN 12068:1999
English language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kathodischer Korrosionsschutz - Organische Umhüllungen für den Korrosionsschutz von in Böden und Wässern verlegten Stahlrohrleitungen im Zusammenwirken mit kathodischem Korrosionsschutz - Bänder und schrumpfende MaterialienProtection cathodique - Revetements organiques extérieurs pour la protection contre la corrosion de tubes en acier enterrés ou immergés en conjonction avec la protection cathodique - Bandes et matériaux rétractablesCathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used
in conjunction with cathodic protection - Tapes and shrinkable materials25.220.60Organske prevlekeOrganic coatings23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 12068:1998SIST EN 12068:1999en01-oktober-1999SIST EN 12068:1999SLOVENSKI
STANDARD



SIST EN 12068:1999



SIST EN 12068:1999



S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14901-2:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
EN 14901-2:2019

To allow ductile iron pipe manufacturers and users of the product to apply TMPO linings and thereby comply with the relevant requirements of EN 545, EN 545, EN 969. This demonstrates innovation according to Annex I, by the use of non-traditional coating systems offering environmental and economic benefits. The TMPO linings meet the criteria expressed in EN 14901, except for those pertinent to fusion bonded epoxy chemistry. The linings are being used in other parts of the world eg Australia and New Zealand and have been incorporated in the recent AWWA C116/A21.16-15 publication. The current status for TMPO linings in EU amounts to a barrier to trade and does not support SME’s involved in the manufacture, lining and application of the material that offers human health benefits, as highlighted in the Annex I and II.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14901-1:2014+A1:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
EN 14901-1:2014+A1:2019

This European Standard defines the requirements and test methods for factory applied epoxy coatings (fusion bonded powder or liquid two-pack) used for the corrosion protection of ductile iron fittings and accessories conforming to EN 545, EN 598, EN 969, EN 12842, EN 14525, for:
-   conveying water (e.g. potable water) at operating temperature up to 50 °C excluding frost; or
-   conveying waste water at operating temperature up to 45 °C excluding frost; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in EN 545:2010, D.2.3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10339:2007(Main)
Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
EN 10339:2007

This European Standard specifies the requirements for the application of liquid applied epoxy internal linings, for the corrosion protection of steel tubes.
This type of lining is generally used in the transport and distribution, under pressure or by gravity, of water intended for human consumption and industrial use, sea water, waste water and also in fire water. The temperature of the water transported generally does not exceed 50 °C.
The choice of the lining and its limits of use depend on the type of product used, the pipe laying conditions, the temperature and the chemical composition of the fluid. The choice of the product for the medium to be transported and its qualification are not part of this European Standard.
The lining consists normally of one layer of liquid product, applied by spray airless technique after surface preparation.
All or some of the requirements of this European Standard can apply to the internal linings of fittings, if agreed by the purchaser and the coater.
The lining in this European Standard can be applied to longitudinally or spirally welded tubes and to seamless steel tubes used for the construction of pipelines for conveying liquids.
These tubes are not intended to be bent after the epoxy lining has been applied.
This European Standard does not cover in-situ applied or rehabilitation linings.
The constituent materials of epoxy linings, when used under the conditions for which they are designed, in permanent or temporary contact with water intended for human consumption, should not change the quality of that water to such an extent that it fails to comply with the requirements of European regulations at the end user. For this purpose, reference should be made to the relevant national standards transposing EN standards when available, dealing with the influence of materials on water quality.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14901-1:2014/kFprA1:2019(Amendment)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
EN 14901-1:2014/FprA1

This European Standard defines the requirements and test methods for factory applied epoxy coatings (fusion bonded powder or liquid two-pack) used for the corrosion protection of ductile iron fittings and accessories conforming to EN 545, EN 598, EN 969, EN 12842, EN 14525, for:
-   conveying water (e.g. potable water) at operating temperature up to 50 °C excluding frost; or
-   conveying waste water at operating temperature up to 45 °C excluding frost; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in EN 545:2010, D.2.3.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1247-1:2023(Main)
Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)
EN ISO 1247-1:2023

This document specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including:
a) general, decorative and protective paints, and
b) special finishing paints.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day