iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 15535:2024

(Main)

General requirements for establishing anthropometric databases (ISO 15535:2023)

General requirements for establishing anthropometric databases (ISO 15535:2023)

This document specifies general requirements for anthropometric databases and their associated
reports that contain measurements taken in accordance with ISO 7250-1.
It provides necessary information, such as characteristics of the user population, sampling methods,
measurement items and statistics, to make international comparison possible among various
population segments. The population segments specified in this document are people who are able to
hold the postures specified in ISO 7250-1.
NOTE The traditional anthropometry defined in ISO 7250-1 is considered to be a necessary complement
to 3-D methods, which are used in some countries. Scanned data are verified according to the definitions given
in ISO 7250-1 (see ISO 20685-1). State-of-the-art software allows integration of traditional anthropometric
measures with those obtained by 3-D imaging.

Allgemeine Anforderungen für die Einrichtung anthropometrischer Datenbanken (ISO 15535:2023)

Dieses Dokument legt allgemeine Anforderungen an anthropometrische Datenbanken und die dazugehörigen Berichte fest, die nach ISO 7250 1 vorgenommene Messungen enthalten.
Sie liefert Angaben, wie z. B. Merkmale der Nutzer-Bevölkerung, Stichprobenahmeverfahren, Maße und statistische Angaben, die einen internationalen Vergleich zwischen unterschiedlichen Bevölkerungsgruppen ermöglichen. Bei den in diesem Dokument festgelegten Bevölkerungsgruppen handelt es sich um Menschen, die in der Lage sind, die in ISO 7250 1 festgelegten Körperhaltungen einzunehmen.
ANMERKUNG   Die in ISO 7250 1 definierte traditionelle Anthropometrie ist als notwendige Ergänzung zu den in einigen Ländern angewendeten 3D-Verfahren zu betrachten. Die erfassten Daten werden nach den in ISO 7250 1 angegebenen Definitionen verifiziert (siehe ISO 20685 1). Eine auf dem neuesten Stand der Technik befindliche Software ermöglicht eine Integration von traditionellen anthropometrischen Maßen und denjenigen, die mit 3D-Darstellung erzielt wurden.

Exigences générales pour la création de bases de données anthropométriques (ISO 15535:2023)

Le présent document spécifie les exigences générales relatives aux bases de données anthropométriques qui contiennent des mesures prises conformément à l’ISO 7250-1 et aux rapports qui leur sont associés.
Il fournit les informations nécessaires telles que caractéristiques de la population utilisatrice, méthodes d’échantillonnage, éléments mesurés et statistiques afin de rendre la comparaison possible à l’échelle internationale parmi diverses tranches de populations. Les tranches de population spécifiées dans le présent document concernent des personnes qui sont à même de tenir les postures spécifiées dans l’ISO 7250-1.
NOTE            L’anthropométrie classique définie dans l’ISO 7250-1 est considérée comme un complément nécessaire aux méthodes tridimensionnelles qui sont utilisées dans certains pays. Les données scannées sont vérifiées conformément aux définitions données dans l’ISO 7250-1 (voir l’ISO 20685-1). Les logiciels de pointe permettent d’intégrer les mesures anthropométriques traditionnelles avec celles obtenues par l’imagerie 3D.

Splošne zahteve za vzpostavitev baz antropometričnih podatkov (ISO 15535:2023)

Dokument določa splošne zahteve za baze antropometričnih podatkov in z njimi povezana
poročila, ki vsebujejo meritve, opravljene v skladu s standardom ISO 7250-1.
Vsebuje potrebne podatke, kot so značilnosti populacije uporabnikov, metode vzorčenja, merilni elementi in statistični podatki, za mednarodno primerjavo med različnimi segmenti populacije. Segmenti populacije, določeni v tem dokumentu, so osebe s
stališči, določenimi v standardu ISO 7250-1.
OPOMBA: Standardna antropometrija, opredeljena v standardu ISO 7250-1, velja za nujen dodatek
metodam 3-D, ki se uporabljajo v nekaterih državah. Optično prebrane podatke se preveri v skladu z opredelitvami iz standarda ISO 7250-1 (glej standard ISO 20685-1). Najsodobnejša programska oprema omogoča vključevanje ukrepov standardne antropometrije z ukrepi, pridobljenimi z zajemanjem 3-D slik.

General Information

Status
Published
Public Enquiry End Date
20-Nov-2022
Publication Date
12-Feb-2024
ICS
13.180 - Ergonomics
Technical Committee
VSN - Safety of machinery
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Oct-2023
Due Date
09-Dec-2023
Completion Date
13-Feb-2024
Ref Project
EN ISO 15535:2023 - General requirements for establishing anthropometric databases (ISO 15535:2023)

Relations

Revised
SIST EN ISO 15535:2013 - General requirements for establishing anthropometric databases (ISO 15535:2012)
Effective Date
14-Jul-2021

Buy Standard

EN ISO 15535:2024EN ISO 15535:2024
PreviousNext
Standard
EN ISO 15535:2024
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15535:2024
01-marec-2024
Splošne zahteve za vzpostavitev baz antropometričnih podatkov (ISO 15535:2023)
General requirements for establishing anthropometric databases (ISO 15535:2023)
Allgemeine Anforderungen für die Einrichtung anthropometrischer Datenbanken (ISO
15535:2023)
Exigences générales pour la création de bases de données anthropométriques (ISO
15535:2023)
Ta slovenski standard je istoveten z: EN ISO 15535:2023
ICS:
13.180 Ergonomija Ergonomics
SIST EN ISO 15535:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15535:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 15535:2024


EN ISO 15535
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2023
EUROPÄISCHE NORM
ICS 13.180 Supersedes EN ISO 15535:2012
English Version

General requirements for establishing anthropometric
databases (ISO 15535:2023)
Exigences générales pour la création de bases de Allgemeine Anforderungen für die Einrichtung
données anthropométriques (ISO 15535:2023) anthropometrischer Datenbanken (ISO 15535:2023)
This European Standard was approved by CEN on 24 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15535:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15535:2024
EN ISO 15535:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15535:2024
EN ISO 15535:2023 (E)
European foreword
This document (EN ISO 15535:2023) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2024, and conflicting national standards shall
be withdrawn at the latest by March 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15535:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 15535:2023 has been approved by CEN as EN ISO 15535:2023 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 15535:2024

---------------------- Page: 6 ----------------------
SIST EN ISO 15535:2024
INTERNATIONAL ISO
STANDARD 15535
Fourth edition
2023-09
General requirements for establishing
anthropometric databases
Exigences générales pour la création de bases de donné
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17558:2024(Main)
Ergonomics - Ergonomics of PPE ensembles
EN 17558:2023

This document can be used to compare the performance of different ensembles as part of any PPE selection process.
This document does not replace the product standards for the certification of individual items of PPE. It specifies the testing of individual items of PPE as an ensemble, so that the interaction between the individual items of PPE can be evaluated and any adverse interactions between the individual items of PPE can be identified.
It specifies requirements for testing by either assessing the performance of a PPE ensemble against a benchmark condition (i.e. benchmark testing) or assessing the performance of two or more PPE ensembles against each other (i.e. comparative testing).
The standard incorporates laboratory as well as field based testing. It can also be used to assess the performance regarding the ergonomics of an ensemble that incorporates an item of PPE that has never before been incorporated into an ensemble.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7933:2023(Main)
Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)
EN ISO 7933:2023

This document describes a model [the predicted heat strain (PHS) model] for the analytical determination and interpretation of the thermal stress (in terms of water loss and rectal temperature) experienced by an average person in a hot environment and determines the maximum allowable exposure times within which the physiological strain is acceptable for 95 % of the exposed population (the maximum tolerable rectal temperature and the maximum tolerable water loss are not exceeded by 95 % of the exposed people).
The various terms used in this prediction model and, in particular, in the heat balance, show the influence of the different physical parameters of the environment on the thermal stress experienced by the average person. In this way, this document makes it possible to determine which parameter or group of parameters can be changed, and to what extent, in order to reduce the risk of excessive physiological strain.
In its present form, this method of assessment is not applicable to cases where special protective clothing (e.g. fully reflective clothing, active cooling and ventilation, impermeable coveralls) is worn.
This document does not predict the physiological response of an individual person, but only considers average persons in good health and fit for the work they perform. It is therefore intended to be used by, among others, ergonomists and industrial hygienists, as the outcomes can require expert interpretations. Recommendations about how and when to use this model are given in ISO 8025.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20685-2:2023(Main)
Ergonomics - 3-D scanning methodologies for internationally compatible anthropometric databases - Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions (ISO 20685-2:2023)
EN ISO 20685-2:2023

ISO 20685-2:2015 addresses protocols for testing of 3-D surface-scanning systems in the acquisition of human body shape data and measurements. It does not apply to instruments that measure the motion of individual landmarks.
While mainly concerned with whole-body scanners, it is also applicable to body-segment scanners (head scanners, hand scanners, foot scanners). This International Standard applies to body scanners that measure the human body in a single view. When a hand-held scanner is evaluated, it has to be noted that the human operator can contribute to the overall error. When systems are evaluated in which the subject is rotated, movement artefacts can be introduced; these can also contribute to the overall error. This part of ISO 20685 applies to the landmark positions determined by an anthropometrist. It does not apply to landmark positions automatically calculated by software from the point cloud.
The quality of surface shape of the human body and landmark positions is influenced by performance of scanner systems and humans including measurers and subjects. This part of ISO 20685 addresses the performance of scanner systems by using artefacts rather than human subjects as test objects.
Traditional instruments are required to be accurate to millimetre. Their accuracy can be verified by comparing the instrument with a scale calibrated according to an international standard of length. To verify or specify the accuracy of body scanners, a calibrated test object with known form and size is used.
The intended audience is those who use 3-D body scanners to create 3-D anthropometric databases including 3-D landmark locations, the users of these data, and scanner designers and manufacturers. This part of ISO 20685 intends to provide the basis for the agreement on the performance of body scanners between scanner users and scanner providers as well as between 3-D anthropometric database providers and data users.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 9241-100:2023(Main)
Ergonomics of human-system interaction - Part 100: Overview of ISO 9241 software ergonomic standards (ISO/TR 9241-100:2023)
CEN ISO/TR 9241-100:2023

ISO 9241-100:2010 enables users of standards related to software ergonomics to identify ergonomics standards particularly relevant to software development, gain an overview on the content of software-ergonomics standards, understand the role of software-ergonomics standards in specifying user requirements as well as designing and evaluating user interfaces and understand the relationship between the various standards.
The software-ergonomics standards are applicable to all those software components of an interactive system affecting usability, including application software (including web-based applications), operating systems, embedded software, software development tools and assistive technologies.

  • Technical report
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 9241-430:2023(Main)
Ergonomics of human-system interaction - Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress (ISO/TS 9241-430:2021)
CEN ISO/TS 9241-430:2023

This document provides guidance on the design, selection and optimization of non-contacting hand and arm gestures for humancomputer interaction. It addresses the assessment of usability and fatigue associated with different gesture set designs and provides recommendations for approaches to evaluating the design and selection of gestures. This document also provides guidance on the documentation of the process for selecting gesture sets.
This document applies to gestures expressed by humans. It does not consider the technology for detecting gestures or the system response when interpreting a gesture. Non-contacting hand gestures can be used for input in a variety of settings, including the workplace or in public settings and when using fixed screens, mobile, virtual reality, augmented reality or mixed-mode reality devices.
Some limitations of this document are:
— The scope is limited to non-contacting gestures and does not include other forms of inputs. For example, combining gesture with speech, gaze or head position can reduce input error, but these combinations are not considered here.
— The scope is limited to non-contacting arm, hand and finger gestures, either unilateral (one-handed) or bilateral (two-handed).
— The scope assumes that all technological constraints are surmountable. Therefore, there is no consideration of technological limitations with interpreting ultra-rapid gestures, gestures performed by people of different skin tones or wearing different colours or patterns of clothing.
— The scope is limited to UI-based command-and-control human computer interaction (HCI) tasks and does not include gaming scenarios, although the traversal of in-game menus and navigation of UI elements is within scope.
— The scope does not include HCI tasks for which an obviously more optimal input method exists. For example, speech input is superior for inputting text than gesture input.
— The scope includes virtual reality (VR), augmented reality (AR) and mixed reality (MR) and the use of head-mounted displays (HMDs).
— The scope does not include the discoverability of gestures but does include the learnability and memorability of gestures. It is assumed that product documentation and tutorials will adequately educate end users about which gestures are possible. Therefore, assessing gesture discoverability is not a primary goal of the recommendations in this document.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 9241-311:2023(Main)
Ergonomics of human-system interaction - Part 311: Application of ISO 9241-307: LCD screens for workstations (ISO/TR 9241-311:2022)
CEN ISO/TR 9241-311:2023

This document provides information relating to the specification of liquid crystal display (LCD) screens at visual display workstations in indoor location, in accordance with ISO 9241-307:2008 clause 5.2. The decision guidance is limited to LCD screens, since these are typically used at workstations.
The information is intended to support managerial decision makers (e. g. procurement operators, companies’ safety committees, occupational safety and health professionals), who are responsible for the acquisition of visual displays.

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 9241-514:2023(Main)
Ergonomics of human-system interaction - Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series (ISO/TR 9241-514:2020)
CEN ISO/TR 9241-514:2022

This document is intended to provide guidance in the use of anthropometric data within the ISO 9241-500 series.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15537:2022(Main)
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2022)
EN ISO 15537:2022

This document establishes methods for determining the composition of groups of persons whose
anthropometric characteristics are to be representative of the intended user population of any specific
object under test.
This document is applicable to the testing of anthropometric aspects of industrial products and designs
having direct contact with the human body or dependent on human body measurements, such as
machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces,
architectural details or transportation equipment.
This document is also applicable to the testing of such safety aspects of products that are dependent on
human body measurements. It does not deal with other aspects of the task or other requirements, such
as perception of information (except geometrical arrangement of the viewing targets) and the use of
controls (except their geometrical placement).
Although this document deals with selecting test persons from an anthropometric perspective, similar
general principles can be applied for other test variables, e.g. biomechanical aspects.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9241-971:2022(Main)
Ergonomics of human-system interaction - Part 971: Accessibility of tactile/haptic interactive systems (ISO 9241-971:2020)
EN ISO 9241-971:2022

This document provides both general and specific ergonomic requirements and recommendations for accessible tactile/haptic interactive systems, including accessible tactile/haptic interactions.
This document provides guidance for increasing the accessibility of interactive systems making use of tactile/haptic input/output modalities such as gestures, vibration, and force feedback. The guidance provided also supports alternative input modalities and the use of different output representations.
This document provides guidance for tactile/haptic interactions that is applicable to a variety of interactive systems, including assistive technologies (AT).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 9241-312:2022(Main)
Ergonomics of human-system interaction - Part 312: Readability of electrophoretic displays (ISO/TR 9241-312:2020)
CEN ISO/TR 9241-312:2022

This document provides an overview of recent research on readability of electrophoretic displays. It also provides information for evaluating readability of electrophoretic displays and defining the context of their use.

  • Technical report
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day