Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications Leather - Part 2: Automotive interior applications

This European Standard specifies requirements for the designations and descriptions that should be used in public or commercial communications, labels or product descriptions when leather is used in upholstered furniture and automotive interior applications.
The designation or description of leather in footwear, leather goods and leather clothing including gloves are not covered by this document.

Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen und die Innenausstattung von Automobilen - Teil 2: Anwendungen im Automobilinnenbereich

Dieses Dokument legt die Anforderungen für die in der öffentlichen und kommerziellen Kommunikation auf Beschriftungen oder Produktbeschreibungen benutzten Bezeichnungen und Beschreibungen fest, wenn Leder bei der Innenausstattung von Automobilen verwendet wird.
Dieses Dokument stellt allgemeine Leitlinien zur Verfügung, die bei der Bezeichnung und Beschreibung von Sitzen und Innenausstattungen von Automobilen vorgesehen sind, wenn auf Leder als Materialbestandteil hingewiesen wird.
Die Bezeichnung oder Beschreibung von Leder in Polstermöbeln, Leder in Schuhen, Lederwaren und bei Lederbekleidung einschließlich Handschuhen wird von diesem Dokument nicht erfasst.

Cuir - Exigences relatives à la désignation et à la description du cuir pour garniture et applications liées à l'intérieur des automobiles

Le présent document spécifie les exigences relatives aux désignations et aux descriptions utilisées pour les communications publiques ou commerciales, les étiquettes ou descriptions de produit lorsque le cuir est utilisé dans l’habitacle des véhicules automobiles.
Le présent document fournit des lignes directrices générales destinées à être appliquées pour désigner et décrire les sièges et banquettes ainsi que l’habitacle d’automobiles lorsqu’il est fait référence au cuir comme matériau constitutif.
La désignation et la description du cuir utilisé dans les meubles rembourrés, les chaussures, les articles de maroquinerie et les vêtements en cuir, y compris les gants, ne sont pas traitées dans le présent document.

Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in avtomobilsko notranjo opremo - 2. del: Avtomobilska notranja oprema

General Information

Status
Not Published
Public Enquiry End Date
01-Feb-2021
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
25-Nov-2020
Due Date
14-Apr-2021
Completion Date
09-Feb-2021

RELATIONS

Buy Standard

Draft
oSIST prEN 16223-2:2021
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 16223-2:2021
01-januar-2021
Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in
avtomobilsko notranjo opremo - 2. del: Avtomobilska notranja oprema

Leather - Requirements for the designation and description of leather in upholstery and

automotive interior applications Leather - Part 2: Automotive interior applications

Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen
und die Innenausstattung von Automobilen - Teil 2: Anwendungen im
Automobilinnenbereich

Cuir - Exigences relatives à la désignation et à la description du cuir pour garniture et

applications liées à l'intérieur des automobiles
Ta slovenski standard je istoveten z: prEN 16223-2
ICS:
43.020 Cestna vozila na splošno Road vehicles in general
59.140.30 Usnje in krzno Leather and furs
oSIST prEN 16223-2:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16223-2:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16223-2:2021
DRAFT
EUROPEAN STANDARD
prEN 16223-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 59.140.30 Will supersede EN 16223:2012
English Version
Leather - Requirements for the designation and
description of leather in upholstery and automotive
interior applications Leather - Part 2: Automotive interior
applications

Cuir - Exigences relatives à la désignation et à la Leder - Anforderungen an Bezeichnung und

description du cuir pour garniture et applications liées Beschreibung von Leder für Polsterungen und die

à l'intérieur des automobiles Innenausstattung von Automobilen - Teil 2:
Anwendungen im Automobilinnenbereich

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 289.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16223-2:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16223-2:2021
prEN 16223-2:2021 (E)
Contents Page

European foreword ............................................................................................................................................ 3

Introduction .......................................................................................................................................................... 4

1 Scope .......................................................................................................................................................... 5

2 Normative references .......................................................................................................................... 5

3 Terms and definitions ......................................................................................................................... 5

4 General principles ................................................................................................................................ 6

5 Requirements ......................................................................................................................................... 6

6 Designation and description ............................................................................................................. 7

Bibliography ......................................................................................................................................................... 8

---------------------- Page: 4 ----------------------
oSIST prEN 16223-2:2021
prEN 16223-2:2021 (E)
European foreword

This document (prEN 16223-2:2021) has been prepared by Technical Committee CEN/TC 289 “Leather”,

the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16223:2012.

In comparison with the previous edition, the following technical modifications have been made:

— EN 16223:2012 has been split into two parts, Part 1: Upholstery applications and Part 2: Automotive

interior application

— Modification in Clause 1 “Scope”, Clause 4 “General principles”¸ Clause 5 “Requirements” and

Clause 6 “Designation”
— Editorial updates
---------------------- Page: 5 ----------------------
oSIST prEN 16223-2:2021
prEN 16223-2:2021 (E)
Introduction

This document is based on the Code of Practice of the International Council of Tanners (ICT) – Code of

Practice on the appropriate designation of leather used in automotive applications (Hong Kong, 30 March

2009).

In the absence of national regulations this document provides the car industries with a standard on which

to base their commercial communications to customers and the general public when leather is used in

their pro
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.