SIST EN ISO 15927-4:2005
(Main)Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005)
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005)
This standard specifies a method for constructing a reference year of hourly values of appropriate meteorological data suitable for assessing the average annual energy for heating and cooling. Other reference years representing average conditions can be constructed for special purposes. The procedures in this standard are not suitable for constructing extreme or semi-extreme years for simulation of, for example, moisture damage or energy demand in cold years.
Meteorological instrumentation and methods of observation are not covered: these are specified by the World Meteorological Organisation.
Wärme- und feuchtetechnisches Verhalten von Gebäuden - Berechnung und Darstellung von Klimadaten - Teil 4: Stündliche Daten zur Abschätzung des Jahresenergiebedarfs für Heiz- und Kühlsysteme (ISO 15927-4:2005)
Dieser Teil von EN ISO 15927 legt ein Verfahren für die Erstellung eines Referenzjahres aus geeigneten stündlichen meteorologischen Daten fest, die zur Abschätzung des durchschnittlichen Jahresenergiebedarfs für Heiz- und Kühlsysteme geeignet sind. Weitere Referenzjahre, die durchschnittliche Bedingungen darstellen, können für besondere Zwecke erstellt werden. Die in diesem Teil von EN ISO 15927 beschriebenen Verfahren eignen sich nicht für die Erstellung von Jahren mit außer- oder ungewöhnlichen meteorologischen Bedingungen beispielsweise zur Simulierung von feuchtebedingten Schäden oder des Energiebedarfs in kalten Jahren.
Meteorologische Messgeräte und Beobachtungsverfahren werden nicht behandelt; diese werden von der World Meteorological Organisation festgelegt.
Performance hygrothermique des bâtiments - Calcul et présentation des données climatiques - Partie 4: Données horaires pour l'évaluation du besoin énergétique annuel de chauffage et de refroidissement (ISO 15927-4:2005)
L'ISO 15927-4:2005 spécifie une méthode pour construire une année de référence de données horaires correspondant à des paramètres météorologiques appropriés qui permettent d'évaluer le besoin énergétique annuel moyen de chauffage et de refroidissement. D'autres années de référence représentant des conditions moyennes peuvent être construites pour des besoins spécifiques. Les méthodes exposées dans l'ISO 15927-4:2005 ne sont pas appropriées à la construction d'années extrêmes ou semi-extrêmes pour la simulation, par exemple, de dégâts causés par l'humidité ou de la demande énergétique lors d'années froides.
Les instruments météorologiques et les méthodes d'observation ne sont pas couverts.
Higrotermalne značilnosti stavb - Izračun in predstavitev podnebnih podatkov - 4. del: Urni podatki za izračun letne rabe energije za ogrevanje in hlajenje (ISO 15927-4:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15927-4:2005
01-december-2005
Higrotermalne značilnosti stavb - Izračun in predstavitev podnebnih podatkov - 4.
del: Urni podatki za izračun letne rabe energije za ogrevanje in hlajenje (ISO 15927-
4:2005)
Hygrothermal performance of buildings - Calculation and presentation of climatic data -
Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO
15927-4:2005)
Wärme- und feuchtetechnisches Verhalten von Gebäuden - Berechnung und Darstellung
von Klimadaten - Teil 4: Stündliche Daten zur Abschätzung des Jahresenergiebedarfs
für Heiz- und Kühlsysteme (ISO 15927-4:2005)
Performance hygrothermique des bâtiments - Calcul et présentation des données
climatiques - Partie 4: Données horaires pour l'évaluation du besoin énergétique annuel
de chauffage et de refroidissement (ISO 15927-4:2005)
Ta slovenski standard je istoveten z: EN ISO 15927-4:2005
ICS:
07.060 Geologija. Meteorologija. Geology. Meteorology.
Hidrologija Hydrology
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 15927-4:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15927-4:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 15927-4:2005
EUROPEAN STANDARD
EN ISO 15927-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 91.120.10; 07.060
English Version
Hygrothermal performance of buildings - Calculation and
presentation of climatic data - Part 4: Hourly data for assessing
the annual energy use for heating and cooling (ISO 15927-
4:2005)
Performance hygrothermique des bâtiments - Calcul et Wärme- und feuchtetechnisches Verhalten von Gebäuden -
présentation des données climatiques - Partie 4: Données Berechnung und Darstellung von Klimadaten - Teil 4:
horaires pour l'évaluation du besoin énergétique annuel de Stündliche Daten zur Abschätzung des
chauffage et de refroidissement (ISO 15927-4:2005) Jahresenergiebedarfs für Heiz- und Kühlsysteme (ISO
15927-4:2005)
This European Standard was approved by CEN on 27 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15927-4:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15927-4:2005
EN ISO 15927-4:2005 (E)
Foreword
This document (EN ISO 15927-4:2005) has been prepared by Technical Committee CEN/TC 89 "Thermal
performance of buildings and building components", the secretariat of which is held by SIS, in collaboration
with Technical Committee ISO/TC 163 "Thermal insulation".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2006, and conflicting national standards shall be withdrawn
at the latest by January 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15927-4:2005
INTERNATIONAL ISO
STANDARD 15927-4
First edition
2005-07-15
Hygrothermal performance of
buildings — Calculation and presentation
of climatic data —
Part 4:
Hourly data for assessing the annual
energy use for heating and cooling
Performance hygrothermique des bâtiments — Calcul et présentation
des données climatiques —
Partie 4: Données horaires pour l'évaluation du besoin énergétique
annuel de chauffage et de refroidissement
Reference number
ISO 15927-4:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms, definitions and symbols. 1
4 Sources of meteorological data . 2
5 Construction of reference year . 2
6 Presentation of the reference years. 4
Bibliography . 5
© ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15927-4 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 89, Thermal performance of buildings and building components, in collaboration with Technical
Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2,
Calculation methods in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
ISO 15927 consists of the following parts, under the general title Hygrothermal performance of buildings —
Calculation and presentation of climatic data:
Part 1: Monthly means of single meteorological elements
Part 4: Hourly data for assessing the annual energy for heating and cooling
Part 5: Data for design heat load for space heating
Part 6: Accumulated temperature differences (degree days)
Future parts are planned on the following subjects:
Hourly data for design cooling load
Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
iv © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
Introduction
This standard covers the selection of appropr
...
SLOVENSKI STANDARD
SIST EN ISO 15927-4:2005
01-december-2005
+LJURWHUPLþQH]QDþLOQRVWLVWDYE,]UDþXQLQSUHGVWDYLWHYNOLPDWVNLKSRGDWNRY
GHO 8UQLSRGDWNL]DL]UDþXQOHWQHUDEHHQHUJLMH]DRJUHYDQMHLQKODMHQMH ,62
Hygrothermal performance of buildings - Calculation and presentation of climatic data -
Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO
15927-4:2005)
Wärme- und feuchtetechnisches Verhalten von Gebäuden - Berechnung und Darstellung
von Klimadaten - Teil 4: Stündliche Daten zur Abschätzung des Jahresenergiebedarfs für
Heiz- und Kühlsysteme (ISO 15927-4:2005)
Performance hygrothermique des bâtiments - Calcul et présentation des données
climatiques - Partie 4: Données horaires pour l'évaluation du besoin énergétique annuel
de chauffage et de refroidissement (ISO 15927-4:2005)
Ta slovenski standard je istoveten z: EN ISO 15927-4:2005
ICS:
07.060 Geologija. Meteorologija. Geology. Meteorology.
Hidrologija Hydrology
91.120.10 Toplotna izolacija stavb Thermal insulation
SIST EN ISO 15927-4:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15927-4:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 15927-4:2005
EUROPEAN STANDARD
EN ISO 15927-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 91.120.10; 07.060
English Version
Hygrothermal performance of buildings - Calculation and
presentation of climatic data - Part 4: Hourly data for assessing
the annual energy use for heating and cooling (ISO 15927-
4:2005)
Performance hygrothermique des bâtiments - Calcul et Wärme- und feuchtetechnisches Verhalten von Gebäuden -
présentation des données climatiques - Partie 4: Données Berechnung und Darstellung von Klimadaten - Teil 4:
horaires pour l'évaluation du besoin énergétique annuel de Stündliche Daten zur Abschätzung des
chauffage et de refroidissement (ISO 15927-4:2005) Jahresenergiebedarfs für Heiz- und Kühlsysteme (ISO
15927-4:2005)
This European Standard was approved by CEN on 27 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15927-4:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15927-4:2005
EN ISO 15927-4:2005 (E)
Foreword
This document (EN ISO 15927-4:2005) has been prepared by Technical Committee CEN/TC 89 "Thermal
performance of buildings and building components", the secretariat of which is held by SIS, in collaboration
with Technical Committee ISO/TC 163 "Thermal insulation".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2006, and conflicting national standards shall be withdrawn
at the latest by January 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15927-4:2005
INTERNATIONAL ISO
STANDARD 15927-4
First edition
2005-07-15
Hygrothermal performance of
buildings — Calculation and presentation
of climatic data —
Part 4:
Hourly data for assessing the annual
energy use for heating and cooling
Performance hygrothermique des bâtiments — Calcul et présentation
des données climatiques —
Partie 4: Données horaires pour l'évaluation du besoin énergétique
annuel de chauffage et de refroidissement
Reference number
ISO 15927-4:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms, definitions and symbols. 1
4 Sources of meteorological data . 2
5 Construction of reference year . 2
6 Presentation of the reference years. 4
Bibliography . 5
© ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15927-4 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 89, Thermal performance of buildings and building components, in collaboration with Technical
Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2,
Calculation methods in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
ISO 15927 consists of the following parts, under the general title Hygrothermal performance of buildings —
Calculation and presentation of climatic data:
Part 1: Monthly means of single meteorological elements
Part 4: Hourly data for assessing the annual energy for heating and cooling
Part 5: Data for design heat load for space heating
Part 6: Accumulated temperature differences (degree days)
Future parts are planned on the following subjects:
Hourly data for design cooling load
Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
iv © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 15927-4:2005
ISO 15927-4:2005(E)
Introduction
This standard covers the selection of appropriate m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.