Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005)

This part of ISO 22827 specifies basic requirements and test  methods for acceptance testing of high-power (average power  more than 100 W), lamp-pumped or laser-diode-pumped  Nd:YAG laser beam welding machines for seam welding with  optical fibre delivery systems. The requirements can also be  applied as a part of verification testing as part of maintenance,  as appropriate. If modifications are made to a laser beam  machine (rebuilding, repairs, modifications to the operating  conditions, etc.) that have an effect on the acceptance testing,  a repeat test may be necessary to cover the machine  parameters affected by such modifications. This part of ISO  22827 applies to the beam generating system, the optical  delivery system and the devices for shielding and assist  gases.

Abnahmeprüfungen für Nd:YAG-Laserstrahlschweißmaschinen - Maschinen mit Versorgung durch Lichtleitfaser - Teil 1: Lasereinrichtung (ISO 22827-1:2005)

Dieser Teil der ISO 22827 legt die grundlegenden Anforderungen und Prüfverfahren für die Abnahmeprüfung von leistungsstarken (mittlere Leistung über 100 W) lampengepumpten oder mit Laserdioden gepumpten Nd:YAG-Laserstrahlschweißmaschinen mit Lichtleiterversorgungssystemen fest.
Die Anforderungen können, wenn geeignet, als Teil einer Prüfung zur Verifizierung sowie als Teil der Wartung angewendet werden.
Wenn Änderungen an einer Laserstrahlschweißmaschine vorgenommen werden (Wiederaufbau, Reparaturen, Änderungen der Betriebsbedingungen usw.), können sich diese auf die Abnahmeprüfung auswirken, eine Wiederholungsprüfung kann notwendig sein, um die Maschinenkennwerte zu erfassen, die durch diese Änderungen beeinflusst werden.
Dieser Teil der ISO 22827 gilt für das System zur Strahlerzeugung, das Lichtleiterversorgungssystem und die Ausrüstungen für die Schutz- und Prozessgase.
ANMERKUNG   Die mechanischen Bewegungseinrichtungen sind in ISO 22827-2 enthalten.
Dieser Teil der ISO 22827 kann als ein Teil für die Abnahmebedingungen zur Versorgung von Laserstrahlschweißmaschinen angewendet werden.

Essais de réception pour les machines de soudage par faisceau laser Nd:YAG - Machines avec transport de faisceau par fibre optique - Partie 1: Ensemble laser (ISO 22827-1:2005)

L'ISO 22827-1:2005 spécifie les exigences de base et les méthodes d'essai pour les essais de réception des machines de soudage de forte puissance (puissance moyenne supérieure à 100 W) à faisceau laser Nd:YAG à pompage par lampe ou à pompage par diode laser avec dispositif de transport de faisceau par fibre optique utilisées pour le soudage en continu.
L'ISO 22827-1:2005 s'applique au dispositif de génération du faisceau laser, au système de transport optique et aux dispositifs relatifs aux gaz de protection et d'assistance.

Prevzemni preskusi Nd:YAG laserskih varilnih naprav – Stroji z optičnimi vlakni – 1. del: Laserji (ISO 22827-1:2005)

General Information

Status
Published
Publication Date
28-Feb-2006
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2006
Due Date
01-Mar-2006
Completion Date
01-Mar-2006

Buy Standard

Standard
EN ISO 22827-1:2006
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22827-1:2006
01-marec-2006
3UHY]HPQLSUHVNXVL1G<$*ODVHUVNLKYDULOQLKQDSUDY±6WURML]RSWLþQLPLYODNQL±
GHO/DVHUML ,62
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre
delivery - Part 1: Laser assembly (ISO 22827-1:2005)
Abnahmeprüfungen für Nd:YAG-Laserstrahlschweißmaschinen - Maschinen mit
Versorgung durch Lichtleitfaser - Teil 1: Lasereinrichtung (ISO 22827-1:2005)
Essais de réception pour les machines de soudage par faisceau laser Nd:YAG -
Machines avec transport de faisceau par fibre optique - Partie 1: Ensemble laser (ISO
22827-1:2005)
Ta slovenski standard je istoveten z: EN ISO 22827-1:2005
ICS:
25.160.30 Varilna oprema Welding equipment
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 22827-1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 22827-1:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 22827-1:2006
EUROPEAN STANDARD
EN ISO 22827-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 25.160.30

English Version
Acceptance tests for Nd:YAG laser beam welding machines -
Machines with optical fibre delivery - Part 1: Laser assembly
(ISO 22827-1:2005)
Essais de réception pour les machines de soudage par Abnahmeprüfungen für Nd:YAG-
faisceau laser Nd:YAG - Machines avec transport de Laserstrahlschweißmaschinen - Maschinen mit Versorgung
faisceau par fibre optique - Partie 1: Ensemble laser (ISO durch Lichtleitfaser - Teil 1: Lasereinrichtung (ISO 22827-
22827-1:2005) 1:2005)
This European Standard was approved by CEN on 26 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22827-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 22827-1:2006

EN ISO 22827-1:2005 (E)





Foreword


This document (EN ISO 22827-1:2005) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2006, and conflicting national
standards shall be withdrawn at the latest by April 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 22827-1:2005 has been approved by CEN as EN ISO 22827-1:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 22827-1:2006


INTERNATIONAL ISO
STANDARD 22827-1
First edition
2005-10-15

Acceptance tests for Nd:YAG laser beam
welding machines — Machines with
optical fibre delivery —
Part 1:
Laser assembly
Essais de réception pour les machines de soudage par faisceau laser
Nd:YAG — Machines avec transport de faisceau par fibre optique —
Partie 1: Ensemble laser




Reference number
ISO 22827-1:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 22827-1:2006
ISO 22827-1:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 22827-1:2006
ISO 22827-1:2005(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Environmental conditions and operating conditions of acceptance tests. 2
4.1 Installation environment . 2
4.2 Power supply. 2
4.3 Cooling system . 2
4.4 Pumping light source . 2
4.5 Shielding and assist gas. 2
4.6 Operating instruction for users. 2
5 Acceptance test . 3
5.1 General. 3
5.2 Check of parts . 3
5.3 Acceptance tests for laser power and optical system. 3
5.4 Test for laser beam safety . 4
5.5 Test of pressures and flow rates of assist and shielding gases . 5
6 Welding test. 5
7 Records of test results. 5
Annex A (informative) Example of a test report form . 6
Annex B (informative) Optional parameters . 8
Bibliography . 9

© ISO 2005 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 22827-1:2006
ISO 22827-1:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22827-1 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 10, Unification of requirements in the field of metal welding.
ISO 22827 consists of the following parts, under the general title Acceptance tests for Nd:YAG laser beam
welding machines — Machines with optical fibre delivery:
⎯ Part 1: Laser assembly
⎯ Part 2: Moving mechanism
iv © ISO 2005 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 22827-1:2006
ISO 22827-1:2005(E)
Introduction
Requests for official interpretations of any aspect of this part of ISO 22827 should be sent to the Secretariat of
ISO/TC 44/SC 10 via the member body in the user's country, a complete listing of which can be found at
www.iso.org.
© ISO 2005 – All rights reserved v

---------------------- Page: 9 ----------------------

SIST EN ISO 22827-1:2006

---------------------- Page: 10 ----------------------

SIST EN ISO 22827-1:2006
INTERNATIONAL STANDARD ISO 22827-1:2005(E)

Acceptance tests for Nd:YAG laser beam welding machines —
Machines with optical fibre delivery —
Part 1:
Laser assembly
1 Scope
This part of ISO 22827 specifies basic requirements and test methods for acceptance testing of high-power
(average power more than 100 W), lamp-pumped or laser-diode-pumped Nd:YAG laser beam welding
machines for seam welding with optical fibre delivery systems.
The requirements can also be applied as a part of verification testing as part of maintenance, as appropriate.
If modifications are made to a laser beam machine (rebuilding, repairs, modifications to the operating
conditions, etc.) that have an effect on the acceptance testing, a repeat test may be necessary to cover the
machine parameters affected by such modifications.
This part of ISO 22827 applies to the beam generating system, the optical delivery system and the devices for
shielding and assist gases.
NOTE The moving mechanism is covered by ISO 22827-2.
This part of ISO 22827 can be applied as a part of the acceptance conditions for the delivery of the optic laser
beam welding cell.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 11553-1, Safety of machinery — Laser processing machines — Part 1: Gen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.