SIST EN 60264-5-1:2001/A1:2004
(Amendment)Packaging of winding wires -- Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions
Packaging of winding wires -- Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions
Amendment 1 - Replace Table 1 and Figure 1
Verpackung von Wickeldrähten -- Teil 5-1: Spulen mit zylindrischem Kern und konischen Flanschen - Maße
Conditionnement des fils de bobinage -- Partie 5-1: Bobines de livraison à fût de forme cylindrique avec les joues coniques - Dimensions de base
Amendement 1 - Remplacer le Tableau 1 et la Figure 1
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997/A:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60264-5-
1:2001/A1:2004
STANDARD
februar 2004
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with
conical flanges - Basic dimensions (IEC 60264-5-1:1997/A:2003)
ICS 29.060.10; 55.060 Referenčna številka
SIST EN 60264-5-1:2001/A1:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60264-5-1/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003
ICS 29.060.10;55.060
English version
Packaging of winding wires
Part 5-1: Cylindrical barrelled delivery spools with conical flanges –
Basic dimensions
(IEC 60264-5-1:1997/A:2003)
Conditionnement des fils de bobinage Verpackung von Wickeldrähten
Partie 5-1: Bobines de livraison à fût Teil 5-1: Spulen mit zylindrischem Kern
de forme cylindrique avec les joues und konischen Flanschen –
coniques – Maße
Dimensions de base (IEC 60264-5-1:1997/A:2003)
(CEI 60264-5-1:1997/A:2003)
This amendment A1 modifies the European Standard EN 60264-5-1:1997; it was approved by CENELEC
on 2003-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60264-5-1:1997/A1:2003 E
---------------------- Page: 2 ----------------------
EN 60264-5-1:1997/A1:2003 - 2 -
Foreword
The text of document 55/838/FDIS, future amendment 1 to IEC 60264-5-1:1997, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A1 to EN 60264-5-1:1997 on 2003-10-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.