Emergency safety showers - Part 1: Plumbed-in body showers for laboratories

This document is a product specification, giving performance requirements for emergency safety body showers connected to the water supply. It is applicable to plumbed-in body showers only, located in laboratory facilities. It is not applicable to emergency safety showers used on industrial sites or in other such areas.
Requirements are given in respect of the performance, installation, adjustment and marking of the showers as well as installation, operation and maintenance instructions to be given by the manufacturer.
NOTE   Attention is drawn to national regulations which may apply in respect of the installation and use of emergency safety showers.

Sicherheitsnotduschen - Teil 1: Körperduschen mit Wasseranschluss für Laboratorien

Diese Europäische Norm ist eine Produktnorm, die Funktionsanforderungen an Sicherheitskörperduschen
festlegt, die an die Wasserversorgung angeschlossen sind. Sie gilt nur für Sicherheitskörperduschen mit
Wasseranschluss, die in Laborbereichen installiert sind. Sie gilt nicht für Sicherheitsnotduschen in
Produktionsstätten oder ähnlichen Bereichen.
Es sind Anforderungen hinsichtlich der Funktion, Installation, Justierung und Kennzeichnung der Duschen
festgelegt sowie Anforderungen an die vom Hersteller zur Verfügung zu stellenden Installations-, Bedienungs-
und Wartungsanleitungen.
ANMERKUNG Es wird auf nationale Regelwerke hingewiesen, die hinsichtlich Installation und Anwendung von
Sicherheitsnotduschen gelten können.

Douches de sécurité - Partie 1 : Douches pour le corps raccordées au réseau d'eau utilisées en laboratoire

Le présent document est une spécification de produit indiquant les exigences de performance des douches de
sécurité pour le corps utilisant de l’eau. Il est applicable seulement aux douches pour le corps raccordées au
réseau d’eau installées dans des laboratoires. Il n’est pas applicable aux douches de sécurité pour le corps
utilisées sur des sites industriels ou dans d’autres endroits.
Des exigences concernant les performances, l’installation, les réglages et le marquage des douches ainsi que
les instructions d’installation, de fonctionnement et de maintenance a fournir par le fabricant, sont données.
NOTE L’attention est attirée sur les réglementations nationales qui peuvent concerner l’installation et l’utilisation des
douches pour le corps.

Varnostne prhe za prvo pomoč - 1. del: Prhe za spiranje telesa s stalnim priključkom na vodovod v laboratorijih

General Information

Status
Published
Publication Date
31-Jan-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2007
Due Date
01-Feb-2007
Completion Date
01-Feb-2007

Buy Standard

Standard
EN 15154-1:2007
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWDOQLPSicherheitsnotduschen - Teil 1: Körperduschen mit Wasseranschluss
für LaboratorienDouches de sécurité - Partie 1 : Douches pour le corps raccordées au réseau d'eau utilisées en laboratoireEmergency safety showers - Part 1: Plumbed-in body showers for laboratories71.040.10Kemijski laboratoriji. Laboratorijska opremaChemical laboratories. Laboratory equipment11.160First aidICS:Ta slovenski standard je istoveten z:EN 15154-1:2006SIST EN 15154-1:2007en,fr,de01-februar-2007SIST EN 15154-1:2007SLOVENSKI
STANDARD



SIST EN 15154-1:2007



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15154-1September 2006ICS 71.040.10 English VersionEmergency safety showers - Part 1: Plumbed-in body showersfor laboratoriesDouches de sécurité - Partie 1 : Douches pour le corpsraccordées au réseau d'eau utilisées en laboratoireSicherheitsnotduschen - Teil 1: Körperduschen mitWasseranschluss
für LaboratorienThis European Standard was approved by CEN on 19 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15154-1:2006: ESIST EN 15154-1:2007



EN 15154-1:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Performance.5 5 Design requirements for installation.7 6 Valve.7 7 Shower head.7 8 Manufacturer's information.7 9 Marking.8 Annex A (informative) Water temperature.9
SIST EN 15154-1:2007



EN 15154-1:2006 (E) 3 Foreword This document (EN 15154-1:2006) has been prepared by Technical Committee CEN/TC 332 “Laboratory equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2007, and conflicting national standards shall be withdrawn at the latest by March 2007. EN 15154 consists of the following parts, under the general title Emergency safety showers  Part 1: Plumbed-in body showers for laboratories  Part 2: Plumbed-in eye wash units  Part 3: Portable body showers (in preparation)  Part 4: Portable eye wash units (in preparation)  Part 5: Plumbed-in body showers for production facilities (in planning) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 15154-1:2007



EN 15154-1:2006 (E) 4 Introduction Plumbed-in body showers are designed and intended to be installed in close range of persons working in a potentially hazardous area. The main purpose of these devices is to immediately deliver a flushing fluid in a sufficient volume to extinguish flames and/or to flush the body following exposure to injurious substances or heat. With this accomplished the injured person can proceed to medical care.
SIST EN 15154-1:2007



EN 15154-1:2006 (E) 5 1 Scope This document is a product specification, giving performance requirements for emergency safety body showers connected to the water supply. It is applicable to plumbed-in body showers only, located in laboratory facilities. It is not applicable to emergency safety showers used on industrial sites or in other such areas. Requirements are given in respect of the performance, installation, adjustment and marking of the showers as well as installation, operation and maintenance instructions to be given by the manufacturer. NOTE Attentio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.