Emergency safety showers - Part 3: Non plumbed-in body showers

This European Standard is a product specification, giving minimum performance requirements for non plumbed-in emergency safety body showers. It is applicable to body showers filled with a washing fluid by the manufacturer and to empty devices to be filled prior to putting into service. Both variations are for first aid use when the body or parts of the body have been exposed to harmful substances or heat. Requirements are also given concerning labelling, marking and information to be supplied by the manufacturer. Throughout this standard, the term "non plumbed-in emergency safety body shower" is referred to as "body shower".

Sicherheitsnotduschen - Teil 3: Körperduschen ohne Wasseranschluss

Diese Europäische Norm ist eine Produktnorm, die Mindestfunktionsanforderungen an Sicherheitskörperduschen
festlegt, die nicht an die Wasserversorgung angeschlossen sind.
Sie gilt für Körperduschen, die seitens des Herstellers mit Spülflüssigkeit befüllt sind und für leere Geräte, die
erst vor Inbetriebnahme befüllt werden. Beide Gerätearten dienen der Erste-Hilfe-Versorgung, wenn der
Körper oder Teile des Körpers schädlichen Substanzen oder Hitze ausgesetzt war.
Es sind zusätzlich Anforderungen hinsichtlich der Beschriftung und Kennzeichnung der Duschen festgelegt
sowie Anforderungen an die vom Hersteller zur Verfügung zu stellenden Informationen.
Im folgenden Text werden „Sicherheitskörperduschen ohne Wasseranschluss“ abgekürzt als „Körperduschen“
bezeichnet.

Douches de sécurité - Partie 3: Douches pour le corps non raccordées au réseau d'eau

La présente Norme européenne est une spécification de produit spécifiant les exigences minimales relatives a la performance des douches de sécurité pour le corps non raccordées au réseau d’eau.
Les «douches de sécurité pour le corps non raccordées au réseau d’eau» sont désignées dans l’ensemble du texte par les termes «douche pour le corps».
Des exigences sont également données concernant le marquage et les informations devant etre fournies par le fabricant.
Celles-ci s’appliquent aux douches pour le corps remplies par le fabricant de fluide de lavage et aux dispositifs vides qui sont a remplir avant la mise en service. Les deux variantes sont destinées a etre utilisées lors des premiers secours, suite a l’exposition du corps ou de parties du corps a des substances dangereuses ou a la chaleur.

Varnostne prhe za prvo pomoč - 3. del: Prenosne prhe za spiranje telesa

General Information

Status
Published
Public Enquiry End Date
19-Oct-2007
Publication Date
06-Apr-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
02-Apr-2009
Due Date
07-Jun-2009
Completion Date
07-Apr-2009

Buy Standard

Standard
EN 15154-3:2009
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WHOHVDSicherheitsnotduschen - Teil 3: Körperduschen ohne WasseranschlussDouches de sécurité - Partie 3: Douches pour le corps non raccordées au réseau d'eauEmergency safety showers - Part 3: Non plumbed-in body showers71.040.10Kemijski laboratoriji. Laboratorijska opremaChemical laboratories. Laboratory equipment11.160First aidICS:Ta slovenski standard je istoveten z:EN 15154-3:2009SIST EN 15154-3:2009en,fr,de01-junij-2009SIST EN 15154-3:2009SLOVENSKI
STANDARD



SIST EN 15154-3:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15154-3March 2009ICS 71.040.10 English VersionEmergency safety showers - Part 3: Non plumbed-in bodyshowersDouches de sécurité - Partie 3: Douches pour le corps nonraccordées au réseau d'eauSicherheitsnotduschen - Teil 3: Körperduschen ohneWasseranschlussThis European Standard was approved by CEN on 21 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15154-3:2009: ESIST EN 15154-3:2009



EN 15154-3:2009 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Performance requirements .6 4.1 Efficacy .6 4.2 Quality of washing fluid .6 4.3 Flow .6 4.4 Container for washing fluid .7 5 Functional Requirements .7 5.1 General .7 5.2 Single use body showers .7 5.3 Multiple use body showers .8 5.4 Refillable body showers .8 6 Information for use .8 6.1 Labelling and marking .8 6.2 Further information and instructions for use to be supplied .9 Bibliography . 10
SIST EN 15154-3:2009



EN 15154-3:2009 (E) 3 Foreword This document (EN 15154-3:2009) has been prepared by Technical Committee CEN/TC 332 “Laboratory equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 15154 consists of the following parts, under the general title Emergency safety showers  Part 1: Plumbed-in body showers for laboratories  Part 2: Plumbed-in eye wash units  Part 3: Non plumbed-in body showers  Part 4: Non plumbed-in eyewash units  Part 5: Plumbed-in body showers for production facilities (in planning) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 15154-3:2009



EN 15154-3:2009 (E) 4 Introduction The first seconds after an accident in which the body or parts of the body have been exposed to harmful substances or heat are critical to keep the injury to a minimum. Non plumbed-in emergency safety body showers are designed and intended to be kept in the immediate proximity of persons working in a potentially hazardous area. The main purpose of these devices is to supply immediate first aid. Non plumbed-in emergency safety body showers can also allow continued washing on the way to medical care. SIST EN 15154-3:2009



EN 15154-3:2009 (E) 5 1 Scope This European Standard is a product specification, giving minimum performance requirements for non plumbed-in emergency safety body showers. It is applicable to body showers filled with a washing fluid by the manufacturer and to empty devices to be filled prior to putting into service. Both variations are for first aid use when the body or parts of the body have been exposed to harmful substances or heat. Requirements are also given concerning labelling, marking and information to be supplied by the manufacturer. Throughout this standard, the term “non plumbed-in emergency safety body shower” is referred to as “body shower”. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 556-1, Sterilization of medical devices – Requirements for medical de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.