iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 12572:2016/oprA1:2024

(Amendment)

Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/DAM 1:2024)

Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/DAM 1:2024)

Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten - Bestimmung der Wasserdampfdurchlässigkeit - Verfahren mit einem Prüfgefäß - Änderung 1 (ISO 12572:2016/DAM 1:2024)

Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de transmission de la vapeur d'eau - Méthode de la coupelle - Amendement 1 (ISO 12572:2016/DAM 1:2024)

Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje lastnosti za prehod vodne pare - Metoda s čašami - Dopolnilo 1 (ISO 12572:2016/DAM 1:2024)

General Information

Status
Not Published
Public Enquiry End Date
25-Jul-2024
ICS
91.100.01 - Construction materials in general
91.120.10 - Thermal insulation of buildings
91.120.30 - Waterproofing
Technical Committee
TOP - Thermal insulation
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
13-May-2024
Due Date
30-Sep-2024
Completion Date
02-Aug-2024
Ref Project
EN ISO 12572:2016/A1:2024 - Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)

Relations

Amends
SIST EN ISO 12572:2016 - Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
Effective Date
04-Oct-2023

Buy Standard

EN ISO 12572:2016/oprA1:2024EN ISO 12572:2016/oprA1:2024
PreviousNext
Draft
EN ISO 12572:2016/oprA1:2024
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje
lastnosti za prehod vodne pare - Metoda s čašami - Dopolnilo 1 (ISO
12572:2016/DAM 1:2024)
Hygrothermal performance of building materials and products - Determination of water
vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/DAM
1:2024)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten -
Bestimmung der Wasserdampfdurchlässigkeit - Verfahren mit einem Prüfgefäß -
Änderung 1 (ISO 12572:2016/DAM 1:2024)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination
des propriétés de transmission de la vapeur d'eau - Méthode de la coupelle -
Amendement 1 (ISO 12572:2016/DAM 1:2024)
Ta slovenski standard je istoveten z: EN ISO 12572:2016/prA1
ICS:
91.100.01 Gradbeni materiali na Construction materials in
splošno general
91.120.30 Zaščita pred vlago Waterproofing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 12572:2016/
DAM 1
ISO/TC 163/SC 1
Hygrothermal performance of
Secretariat: DIN
building materials and products —
Determination of water vapour
Voting begins on:
2024-05-08
transmission properties — Cup
Voting terminates on:
method
2024-07-31
AMENDMENT 1
Performance hygrothermique des matériaux et produits pour le
bâtiment — Détermination des propriétés de transmission de la
vapeur d'eau — Méthode de la coupelle
AMENDEMENT 1
ICS: 91.120.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 12572:2016/DAM 1:2024(en)
DRAFT
ISO 12572:2016/DAM 1:2024(en)
Amendment
ISO 12572:2016/
DAM 1
ISO/TC 163/SC 1
Hygrothermal performance
Secretariat: DIN
of building materials and
products — Determination of
Voting begins on:
water vapour transmission
Voting terminates on
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61869-1:2024(Main)
Instrument transformers - Part 1: General requirements (IEC 61869-1:2023)
EN IEC 61869-1:2024

IEC 61869-1:2023 is applicable to newly manufactured instrument transformers intended for applications where the nominal voltage is higher than 1 kV AC or 1,5 kV DC, with an analogue or a digital secondary signal for measuring, protection and control purposes, with rated frequencies from 15 Hz to 400 Hz, or for DC applications.
The general requirements for instrument transformers for applications in LV systems (nominal voltage ≤ 1 kV AC or ≤ 1,5 kV DC) are covered by IEC 61869-201.
This part of IEC 61869 is a product family standard and covers general requirements only. For each type of instrument transformer, the product standard is composed of this document and the relevant specific product standard.
This part of IEC 61869 contains the requirements for the limits of the errors both for analogue and digital secondary signal. The other characteristics of a digital interface for instrument transformer are standardised in IEC 61869-9 as an application of the IEC 61850 horizontal standard series, covering communication networks and systems for power utility automation.
This part of IEC 61869 considers bandwidth requirements. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are specified in 5.7.
IEC 61869-1:2023 cancels and replaces the first edition published in 2007 and IEC 61869 6:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) merger with IEC 61869-6:2016;
b) new scope: equipment for HV applications with a nominal voltage > 1 kV AC or 1,5 kV DC;
c) new classification of some special tests as type tests or routine test;
d) additional type tests, additional special tests and new clause for commissioning tests;
e) new annexes E, F, G and I.

  • Standard
    149 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17842-2:2024(Main)
Playground equipment for children ­ Part 2: Replies to requests for interpretation of EN 1176:2017 and its parts (2020 -­ 2022)
CEN/TR 17842-2:2024

The purpose of this CEN Technical Report is to publish replies to requests for interpretations, to all parts of EN 1176, which have been drafted by the Interpretation Panel and confirmed by CEN/TC136/SC1.

  • Technical report
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13480-6:2024(Main)
Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13480-6:2024

This document specifies requirements for industrial piping either totally buried or partly buried and partly run in sleeves or similar protection. It is used in conjunction with the other six parts of
EN 13480:2024 series.
Where buried piping subject to this standard connects to piping installed under other jurisdiction such as pipelines, the transition can be made at a closing element e.g. an isolating or regulating valve separating the two sections. This can be close to the boundary of the industrial site, but can be inside or outside the boundary.
Operating temperature up to 75 °C.
NOTE   For higher temperatures reference can be made to EN 13941-1:2019+A1:2021 and EN 13941 1:2019+A1:2021, but it is kept in mind, that CEN/TC 107 only deals with pre-insulated piping with temperatures up to 140 °C and diameters up to 800 mm, which is state of the art for these products.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12953-3:2016/AC:2024(Corrigendum)
Shell boilers - Part 3: Design and calculation for pressure parts
EN 12953-3:2016/AC:2024

This Part of this European Standard specifies requirements for the design and calculation of pressure parts of shell boilers as defined in EN 12953 1.
NOTE   For other components such as economisers, superheaters, tube walls, headers, reference should be made to EN 12952 series.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1591-1:2024(Main)
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
EN 1591-1:2024

This document defines a calculation method for bolted, gasketed, circular flange joints. Its purpose is to ensure structural integrity and control of leak tightness. It uses gasket parameters based on definitions and test methods specified in EN 13555:2014.
The calculation method is not applicable to joints with a metallic contact out of the sealing face or to joints whose rigidity varies appreciably across gasket width. For gaskets in incompressible materials, which permit large deformations, the results given by the calculation method can be excessively conservative (i.e. required bolting load too high, allowable pressure of the fluid too low, required flange thickness too large, etc.).

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13480-2:2024(Main)
Metallic industrial piping - Part 2: Materials
EN 13480-2:2024

This document specifies the requirements for steel products used for industrial piping and supports.
For some metallic materials other than steel, such as spheroidal graphite cast iron, aluminium, nickel, copper, titanium, requirements are or will be formulated in separate parts of this document.
For metallic materials which are not covered by a harmonized material standard and are not likely to be in near future, specific rules are given in this part or the above cited parts of this document.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13480-3:2024(Main)
Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2024

This document specifies the design and calculation of industrial metallic piping systems, including supports, covered by EN 13480 series.

  • Standard
    383 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 899-2:2024(Main)
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2024)
EN ISO 899-2:2024

ISO 899-2:2003 specifies a method for determining the flexural creep of plastics in the form of standard test specimens under specified conditions such as those of pretreatment, temperature and humidity. It applies only to a simple freely supported beam loaded at mid-span (three-point-loading test).
The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-reinforced plastics materials (see ISO 472 for definitions) in the form of dumb-bell-shaped test specimens moulded directly or machined from sheets or moulded articles.
NOTE The method may be unsuitable for certain fibre-reinforced materials due to differences in fibre orientation.
The method is intended to provide data for engineering-design and research and development purposes. Data for engineering-design purposes requires the use of extensometers to measure the gauge length of the specimen. Data for research or quality-control purposes may use the change in distance between the grips (nominal extension).
Flexural creep may vary significantly with differences in specimen preparation and dimensions and in the test environment. The thermal history of the test specimen can also have profound effects on its creep behaviour (see Annex A). Consequently, when precise comparative results are required, these factors must be carefully controlled.
If flexural-creep properties are to be used for engineering-design purposes, the plastics materials should be tested over a broad range of stresses, times and environmental conditions.
The method may not be suitable for determining the flexural creep of rigid cellular plastics (attention is drawn in this respect to ISO 1209-1, Cellular plastics, rigid -- Flexural tests -- Part 1: Bending test, and ISO 1209-2, Cellular plastics, rigid -- Flexural tests -- Part 2: Determination of flexural properties).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13480-8:2024(Main)
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 13480-8:2024

This document specifies requirements for industrial piping systems made of aluminium and aluminium alloys in addition to the general requirements for industrial piping according to the series of standards EN 13480:2024 and CEN/TR 13480-7:2017. It specifies requirements for wrought products only.
NOTE   Castings is not covered in this document.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21012:2024(Main)
Cryogenic vessels - Hoses (ISO 21012:2024)
EN ISO 21012:2024

This document specifies design, construction, type and production testing, and marking requirements for both non-insulated cryogenic flexible hoses and insulated vacuum jacketed hoses used for the transfer of cryogenic fluids within the following range of operating conditions:
—     working temperature range: from −270 °C to +65 °C;
—     nominal size (DN): from 10 to 100.
End fittings for mounting of any couplings are within the scope of this document, but the couplings are subject to other standards.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day