SIST EN 1265:2000
(Main)Noise test code for foundry machines and equipment
Noise test code for foundry machines and equipment
Based on EN 292-2:1991, Annex A 1.7.4 f, this noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission characteristics of several groups of foundry machinery. It specifies noise measurement methods that are available and operating and mounting conditions that shall be used for the test. Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for: - manufacturers to declare the noise emitted; - comparing the noise emitted by machines in the group concerned; - purposes of noise control at the source at the design stage. The use of this standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3). This standard has a main body giving general requirements common to the foundry machines family. Six normative Annexes give requirements specific to the groups of foundry machinery listed below: - core making machines (EN 710); - moulding machines (EN 710); - knock-out grids and knock-out trays (EN 710); - dry abrasive blasting equipment (not restricted to foundry application) - (prEN 1248); - air blasting equipment (prEN 1248); - diecasting machines (EN 869); and six informative Annexes giving guidance for the definition of specific operating conditions. The main body of this standard also gives guidance for the measurement of the noise emission of foundry machines not dealt with in the Annexes. This standard does not cover the computation of personnel daily noise exposure.
Geräuschmeßverfahren für Gießereimaschinen und -anlagen
Auf der Grundlage der EN 292-1:1991, Anhang A 1.7.4 f, beschreibt diese Geräusccheßnorm alle benötigten Informationen für eine effektive und unter festgelegten Bedingungen durchzuführende Bestimmung, Angabe und Nachprüfung der Geräuschemissionseigenschaften für verschiedener Gruppen von Gießereimaschinen. Sie beschreibt im einzelnen die verfügbaren Geräuschmeßmethoden und Betriebs- und Aufstellungsbedingungen, die für den Test angewendet werden müssen.
Code d'essai acoustique pour machines et équipements de fonderie
Sur la base de l'EN 292-2:1991, annexe A 1.7.4 f, le présent code d'essai spécifie toutes les informations qui sont nécessaires pour effectuer d'une maniere efficace et dans des conditions normalisées la détermination, la déclaration et la vérification des valeurs d'émission sonore de plusieurs familles de machines de fonderie. Il spécifie les méthodes de mesurage qui sont disponibles ainsi que les conditions de fonctionnement et de montage qui doivent etre utilisées pour l'essai.
Pravila za merjenje hrupa livarskih strojev in opreme
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pravila za merjenje hrupa livarskih strojev in opremeGeräuschmeßverfahren für Gießereimaschinen und -anlagenCode d'essai acoustique pour machines et équipements de fonderieNoise test code for foundry machines and equipment25.120.30Livarska opremaMoulding equipment17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:EN 1265:1999SIST EN 1265:2000en01-april-2000SIST EN 1265:2000SLOVENSKI
STANDARD
SIST EN 1265:2000
SIST EN 1265:2000
SIST EN 1265:2000
SIST EN 1265:2000
SIST EN 1265:2000
SIST EN 1265:2000
SIST EN 1265:2000
SIST EN 1265:2000
SIST EN 1265:20
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.