iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 18007-2:2023

(Main)

Electromagnetic pulse welding - Part 2: Design of welded joints

Electromagnetic pulse welding - Part 2: Design of welded joints

This document specifies the requirements for the specification and qualification of welding procedures for electromagnetic pulse welding.

Schweißen und verwandte Verfahren - Elektromagnetisches Pulsschweißen - Teil 2: Ausführung der Schweißverbindungen

Dieses Dokument legt die Anforderungen an die Ausführung von elektromagnetischen Pulsschweißungen fest und enthält Richtlinien für die Ausführung von elektromagnetischen Pulsschweißungen.

Soudage par impulsion électromagnétique - Partie 2 : Conception des assemblages soudés

Le présent document spécifie les exigences de conception pour les soudures par impulsion électromagnétique et fournit des lignes directrices de conception pour le soudage par impulsion électromagnétique.

Elektromagnetno utripno varjenje - 2. del: Načrtovanje zvarnih spojev

General Information

Status
Not Published
Public Enquiry End Date
19-Nov-2023
ICS
25.160.10 - Welding processes
25.160.40 - Welded joints and welds
Technical Committee
VAR - Welding
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
23-Aug-2023
Due Date
10-Jan-2024
Ref Project
prEN 18007-2 - Electromagnetic pulse welding - Part 2: Design of welded joints

Buy Standard

prEN 18007-2:2023prEN 18007-2:2023
PreviousNext
Draft
prEN 18007-2:2023
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 18007-2:2023
01-november-2023
Elektromagnetno utripno varjenje - 2. del: Načrtovanje zvarnih spojev
Electromagnetic pulse welding - Part 2: Design of welded joints
Schweißen und verwandte Verfahren - Elektromagnetisches Pulsschweißen - Teil 2:
Ausführung der Schweißverbindungen
Soudage par impulsion électromagnétique - Partie 2 : Conception des assemblages
soudés
Ta slovenski standard je istoveten z: prEN 18007-2
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
25.160.40 Varjeni spoji in vari Welded joints and welds
oSIST prEN 18007-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 18007-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN 18007-2:2023


DRAFT
EUROPEAN STANDARD
prEN 18007-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2023
ICS 25.160.10
English Version

Welding and allied processes - Electromagnetic pulse
welding - Part 2: Design of welded joints
 Schweißen und verwandte Verfahren -
Elektromagnetisches Pulsschweißen - Teil 2:
Ausführung der Schweißverbindungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18007-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 18007-2:2023
prEN 18007-2:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Design requirements . 5
4.1 Documentation . 5
4.2 Joint design . 5
4.2.1 General. 5
4.2.2 Welding of sheet metal parts . 5
4.2.3 Welding of cylindrical parts . 6
4.3 Additio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 25239-2:2020(Main)
Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020)
EN ISO 25239-2:2020

This document specifies design requirements for friction stir weld joints.
In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25239-2:2020(Main)
Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020)
EN ISO 25239-2:2020

This document specifies design requirements for friction stir weld joints.
In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS 4207-2:2023
Emission measurements at small firing installations - Part 2: Measurements at installations for solid fuel (VDI 4207-2:2016, modified)
  • Technical specification
    69 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21911-1:2023(Main)
Solid recovered fuels - Determination of self-heating - Part 1: Isothermal calorimetry (ISO 21911-1:2022)
EN ISO 21911-1:2023

This document specifies an analytical method for quantification of the spontaneous heat generation from solid recovered fuels using isothermal calorimetry.
This document gives guidance on the applicability and use of the specified analytical method. It further establishes procedures for sampling and sample handling of solid recovered fuels prior to the analysis of spontaneous heat generation.
The test procedure given in this document quantifies the thermal power (heat flow) of the sample during the test. It does not identify the source of self-heating in the test portion analysed.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25119-1:2023(Main)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018)
EN ISO 25119-1:2023

This document sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (e.g. street-sweeping machines).
This document is not applicable to:
—          aircraft and air-cushion vehicles used in agriculture;
—          lawn and garden equipment.
This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications.
NOTE 1    Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer.
This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protective measures, safeguards, or safety-related functions in response to non-E/E/PES hazards.
Examples included within the scope of this document:
—          SRP/CS limiting current flow in electric hybrids to prevent insulation failure/shock hazards;
—          electromagnetic interference with the SRP/CS;
—          SRP/CS designed to prevent fire.
Examples not included in the scope of this document:
—          insulation failure due to friction that leads to electric shock hazards;
—          nominal electromagnetic radiation impacting nearby machine control systems;
—          corrosion causing electric cables to overheat.
This document is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic).
NOTE 2    See also ISO 12100 for design principles related to the safety of machinery.
This document is not applicable to safety related parts of control systems manufactured before the date of its publication.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17461:2023(Main)
Gymnastic equipment - Individual and multifunctional vaulting boxes - Safety requirements and test methods
EN 17461:2023

This European Standard specifies functional requirements and specific safety requirements in addition to the general safety standard EN 913 for gymnastic and agility boxes for individual or multifunctional use. The multifunctional boxes include combination with other standardized gymnastic equipment, its connection points and imposed loads.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12952-3:2023(Main)
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
EN 12952-3:2022

This document specifies the requirements for the design and calculation of water-tube boilers as defined in EN 12952-1.
The purpose of this document is to ensure that the hazards associated with water-tube boilers are reduced to a minimum by the proper application of the design according to this part of EN 12952.

  • Standard
    165 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    171 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62769-6-100:2023(Main)
Field Device Integration (FDI®) - Part 6-100: Technology Mapping - .Net (IEC 62769-6-100:2023)
EN IEC 62769-6-100:2023

IEC 62769-6-100:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation regarding the components FDI® Client and User Interface Plug-in (UIP) using the Runtime .NET. This runtime is specific only to the WORKSTATION platform as defined in IEC 62769‑4.
[1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62769-4:2023(Main)
Field Device Integration (FDI®) - Part 4: FDI Packages (IEC 62769-4:2023)
EN IEC 62769-4:2023

IEC 62769-4:2023 is available as IEC 62769-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 62769-4:2023 specifies the FDI®[1] Packages. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in Architecture diagram figure.
[1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61010-031:2023(Main)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2022)
EN IEC 61010-031:2023

IEC 61010-031:2022 specifies safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement, and their related accessories. These probe assemblies are for non-contact or direct electrical connection between a part and electrical test and measurement equipment. They can be fixed to the equipment or be detachable accessories for the equipment.
It has the status of a group safety publication in accordance with IEC Guide 104.
This third edition cancels and replaces the second edition published in 2015, and Amendment 1:2018. IEC 61010-031 is a stand-alone standard. This edition includes the following significant technical changes with respect to the previous edition:


       
  1. the scope has been made succinct. General information from the scope of Edition 2 has been moved to a new Clause 4. Consequently, Clause 4 to Clause 8 of Edition 2 have been renumbered. Clause 9 of Edition 2 has been deleted;

    2.    
  2. in Clause 2, normative references have been dated and new normative references have been added;

    3.    
  3. in 3.1.4, the definition of probe tip has been modified;

    4.    
  4. in 4.1, there is no longer any differentiation between high voltage and low voltage probe assemblies. Type C probe assemblies have been merged with Type B probe assemblies;

    5.    
  5. in 4.1 d) "Kelvin" probes have been added to the list of probe assemblies as a new Type E and a new Figure 5;

    6.    
  6. in 4.1 e), probes for voltage measurement without electrical connection to conductors have been added to the list of probe assemblies as a new Type F and a new Figure 6;

    7.    
  7. in 4.2.1, spread of fire is no longer considered as a hazard;

    8.    
  8. Subclause 4.4.2.5 from Edition 2 has been deleted;

    9.    
  9. Subclause 4.4.4.3 from Edition 2 has been deleted;

    10.    
  10. in 5.4.4.1 consideration has been given to spacings and impedance;

    11.    
  11. in 6.1.1, removable parts of probe tips which bear markings are allowed;

    12.    
  12. in 6.1.5, the voltage to be marked for measurement categories is the AC line-to-neutral or DC voltage;

    13.    
  13. in 7.4.2, requirements for unmated connectors have been modified as follows:
       

            
    1. Table 2 has been modified and expanded,

      2.       
    2. a calculation method for clearances of connectors above 20 kV has been defined,

      3.       
    3. creepage distances have been aligned with clearances;

      4.    

       

    14.    
  14. in 7.4.3.1 and 7.4.3.5, requirements for IP2X probe tips with retractable sleeve have been added;

    15.    
  15. in 7.4.3.2, Probe tips are now applicable to non-contact probe assemblies;

    16.    
  16. in 7.5.2.3.2, the values of Table 5 have been modified;

    17.    
  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day