iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 18640-2:2018/A1:2019

(Amendment)

Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters - Amendment 1 (ISO 18640-2:2018/Amd 1:2019)

Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters - Amendment 1 (ISO 18640-2:2018/Amd 1:2019)

This European standard describes a thermophysiological model (thermal
human simulator) that uses the output data of the first part to obtain
physiological heat load criteria that predicts the (maximal) duration of
work in the protective clothing in fire fighters’ relevant conditions.
NOTE The human simulator method using the Sweating Torso (i.e.
coupling of the instrumented manikin with a thermo-physiological
feedback model) is validated for different scenarios by comparison to
human subject trials(1, 2). The scenarios also included warm and hot
environments as can be expected for firefighter applications. Core
temperature, being one of the most important physiological variables,
and mean skin temperature, which is a useful indicator of thermal comfort
sensation and of the overall condition of the body, are chosen as relevant
physiological parameters for the thermophysiological human simulator.

Schutzkleidung für die Feuerwehr - Physiologische Wärmebelastung - Teil 2: Bestimmung der physiologischen Wärmebelastung ausgelöst durch von Feuerwehrleuten getragene Schutzkleidung - Änderung 1 (ISO 18640-2:2018/Amd 1:2019)

Vêtements de protection pour sapeurs-pompiers - Impact physiologique - Partie 2: Détermination de la charge thermo physiologique provoquée par les vêtements de protection portés par les sapeurs-pompiers - Amendement 1 (ISO 18640-2:2018/Amd 1:2019)

Varovalna obleka za gasilce - Fiziološki vpliv - 2. del: Določanje fiziološke toplotne obremenitve, ki jo povzroča varovalna obleka, ki jo nosijo gasilci - Dopolnilo A1 (ISO 18640-2:2018/Amd 1:2019)

Ta evropski standard opisuje termofiziološki model (toplotni simulator človeka), ki uporablja izhodne podatke prvega dela za oblikovanje meril fiziološke toplotne obremenitve in napoveduje (najdaljše) trajanje dela v varovalnih oblačilih v pogojih dela gasilcev. OPOMBA: metoda s simulatorjem človeka, ki uporablja torzo za potenje (tj. lutko, opremljeno z instrumenti in modelom za toplotno-fiziološke povratne informacije) je bil potrjen v različnih scenarijih, pri čemer je bila izvedena primerjava s preskušanji na ljudeh (1, 2). V te scenarije so bila vključena tudi topla in hladna okolja, ki jih je mogoče pričakovati pri delu gasilcev. Za termofiziološki simulator človeka sta bili kot upoštevana fiziološka parametra izbrani bazalna temperatura, ki je ena od najpomembnejših fizioloških spremenljivk, in povprečna temperatura kože, ki je koristen kazalnik občutka toplotnega udobja in splošnega stanja telesa.

General Information

Status
Published
Public Enquiry End Date
19-May-2019
Publication Date
12-Nov-2019
ICS
13.220.10 - Fire-fighting
13.340.10 - Protective clothing
Technical Committee
OVP - Personal protecting equipment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Nov-2019
Due Date
09-Jan-2020
Completion Date
13-Nov-2019
Ref Project
EN ISO 18640-2:2018/A1:2019 - Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters - Amendment 1 (ISO 18640-2:2018/Amd 1:2019)

Relations

Amends
SIST EN ISO 18640-2:2018 - Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO 18640-2:2018)
Effective Date
01-Dec-2019

Buy Standard

EN ISO 18640-2:2018/A1:2019EN ISO 18640-2:2018/A1:2019
PreviousNext
Amendment
EN ISO 18640-2:2018/A1:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2019
Varovalna obleka za gasilce - Fiziološki vpliv - 2. del: Določanje fiziološke toplotne
obremenitve, ki jo povzroča varovalna obleka, ki jo nosijo gasilci - Dopolnilo A1
(ISO 18640-2:2018/Amd 1:2019)
Protective clothing for firefighters - Physiological impact - Part 2: Determination of
physiological heat load caused by protective clothing worn by firefighters - Amendment 1
(ISO 18640-2:2018/Amd 1:2019)
Schutzkleidung für die Feuerwehr - Physiologische Wärmebelastung - Teil 2:
Bestimmung der physiologischen Wärmebelastung ausgelöst durch von
Feuerwehrleuten getragene Schutzkleidung - Änderung 1 (ISO 18640-2:2018/Amd
1:2019)
Vêtements de protection pour sapeurs-pompiers - Impact physiologique - Partie 2:
Détermination de la charge thermo physiologique provoquée par les vêtements de
protection portés par les sapeurs-pompiers - Amendement 1 (ISO 18640-2:2018/Amd
1:2019)
Ta slovenski standard je istoveten z: EN ISO 18640-2:2018/A1:2019
ICS:
13.220.10 Gašenje požara Fire-fighting
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 18640-2:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 13.340.10
English Version
Protective clothing for firefighters - Physiological impact -
Part 2: Determination of physiological heat load caused by
protective clothing worn by firefighters - Amendment 1
(ISO 18640-2:2018/Amd 1:2019)
Vêtements de protection pour sapeurs-pompiers - Schutzkleidung für die Feuerwehr - Physiologische
Impact physiologique - Partie 2: Détermination de la Wärmebelastung - Teil 2: Bestimmung der
charge thermo physiologique provoquée par les physiologischen Wärmebelastung ausgelöst durch von
vêtements de protection portés par les sapeurs- Feuerwehrleuten getragene Schutzkleidung -
pompiers - Amendement 1 (ISO 18640-2:2018/Amd Änderung 1 (ISO 18640-2:2018/Amd 1:2019)
1:2019)
This amendment A1 modifies the European Standard EN ISO 18640-2:2018; it was approved by CEN on 6 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18640-2:2018/A1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 18640-2:2018/A1:2019) has been prepared by Technical Committee ISO/TC 94
"Personal safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC
162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Franc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 15384:2020/A1:2021(Amendment)
Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing - Amendment 1 (ISO 15384:2018/Amd 1:2021)
EN ISO 15384:2020/A1:2021
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 469:2020(Main)
Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities
EN 469:2020

This document specifies minimum performance requirements for protective clothing designed to be worn during firefighting activities. The requirements are detailed in this document covering heat and flame, mechanical, chemical, comfort, visibility, etc.
This document covers the general clothing design, the minimum performance levels of the material used, the methods of test to be used to determine these performance levels, marking and information supplied by the manufacturer.
This document makes distinction between firefighting activities dividing them into two performance levels based on a risk assessment:
-   Level 1: specifies the minimum requirements for firefighting clothing involving work associated with outdoor firefighting and their support activities, taking into account the environments and conditions of the expected operational scenarios of such firefighting activities.
The level 1 is not applicable for protection against risks encountered in fighting fires or rescue from fire activities in structures, unless combined to a level 2 or other specialised PPE.
-   Level 2: specifies the minimum requirements for firefighting clothing for risks encountered in fighting fires and rescue from fire in structures.
The distinction between Level 1 and Level 2 clothing is restricted to the requirements on heat and flame (X1 or X2 - Heat and Flame). These levels of protection can be reached by a single or a combination of separate garments.
Additional marking provides two grades of protection for Y (protection against water penetration) and Z (water vapour resistance). It is essential that these performance grades are indicated on the marking of the clothing and explained in the instructions for use.
This document does not cover protective clothing for specialized tasks or specific risk situations e.g. wildland firefighting, specialized firefighting and/or advanced technical rescue operations dealing with hazardous chemicals, working with chainsaws and water and rope rescue.
This document does not cover protection for the head, hands and feet or specific protection against other hazards e.g. chemical, biological, radiological and electrical hazards. These aspects may be covered in other European Standards.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15384:2020(Main)
Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing (ISO 15384:2018)
EN ISO 15384:2020

This International Standard specifies methods of test and minimum performance requirements for protective clothing to
be worn in wildland firefighting and associated activities. This clothing is not intended to provide protection during fire
entrapment. This International Standard applies to the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels.
This International Standard is not applicable to clothing for use in risk situations where clothing complying with ISO 11613 or
ISO 15538 is more suitable, nor does this International Standard cover clothing to protect against chemical, biological, electrical
or radiation hazards.This International Standard is not applicable to protection of the head (it may cover the necks), eyes, hand, feet and respiratory system. These aspects may be dealt with in
other International Standards.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18640-1:2018/A1:2020(Amendment)
Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso - Amendment 1 (ISO 18640-1:2018/Amd 1:2019)
EN ISO 18640-1:2018/A1:2019

This European Standard specifies the Sweating Torso as a method to
measure the coupled heat and mass transfer through protective clothing
in fire fighters’ specific conditions.
NOTE The Sweating Torso is developed to perform highly reproducible
laboratory tests for heat and mass transfer on clothing systems under
controlled conditions which are closely correlated to real conditions. The
Sweating Torso is a cylinder with the same size as a human trunk. The
layers of the measurement cylinder are made of compact Teflon,
polyethylene and aluminium. Due to this combination of materials,
transient processes can be modelled. Thus, changes in the skin and core
temperature can be simulated. The Sweating Torso contains a total of 54
independently-controlled sweating nozzles. In order to avoid any axial
heat loss, the cylinder has a heated guard at each end. The cylinder and
the thermal guards are heated electrically using heating foils. The
Sweating Torso can be run either with constant surface temperature or
with constant heating. The whole Sweating Torso is placed on a
precision scale to assess the evaporated and condensed amount of
water.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18640-2:2018(Main)
Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO 18640-2:2018)
EN ISO 18640-2:2018

This European standard describes a thermophysiological model (thermal
human simulator) that uses the output data of the first part to obtain
physiological heat load criteria that predicts the (maximal) duration of
work in the protective clothing in fire fighters’ relevant conditions.
NOTE The human simulator method using the Sweating Torso (i.e.
coupling of the instrumented manikin with a thermo-physiological
feedback model) is validated for different scenarios by comparison to
human subject trials(1, 2). The scenarios also included warm and hot
environments as can be expected for firefighter applications. Core
temperature, being one of the most important physiological variables,
and mean skin temperature, which is a useful indicator of thermal comfort
sensation and of the overall condition of the body, are chosen as relevant
physiological parameters for the thermophysiological human simulator.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18640-1:2018(Main)
Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso (ISO 18640-1:2018)
EN ISO 18640-1:2018

This European Standard specifies the Sweating Torso as a method to
measure the coupled heat and mass transfer through protective clothing
in fire fighters’ specific conditions.
NOTE The Sweating Torso is developed to perform highly reproducible
laboratory tests for heat and mass transfer on clothing systems under
controlled conditions which are closely correlated to real conditions. The
Sweating Torso is a cylinder with the same size as a human trunk. The
layers of the measurement cylinder are made of compact Teflon,
polyethylene and aluminium. Due to this combination of materials,
transient processes can be modelled. Thus, changes in the skin and core
temperature can be simulated. The Sweating Torso contains a total of 54
independently-controlled sweating nozzles. In order to avoid any axial
heat loss, the cylinder has a heated guard at each end. The cylinder and
the thermal guards are heated electrically using heating foils. The
Sweating Torso can be run either with constant surface temperature or
with constant heating. The whole Sweating Torso is placed on a
precision scale to assess the evaporated and condensed amount of
water.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16689:2017(Main)
Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue
EN 16689:2017

This European Standard specifies minimum levels of performance requirements for protective clothing to be worn by firefighters during technical rescue operations.This European Standard covers the general clothing design, the minimum performance levels of the materials used, the methods of test to be used to determine these performance levels, and marking and information supplied by the manufacturer. The required performance levels may be achieved by the use of one or more garments. The levels of thermal and other protection specified by this standard may not be sufficient to provide the type and levels of protection required for certain risks encountered fighting fires in buildings and other structures, rescue from fire in buildings and other structures, dealing with hazardous chemicals etc. This European Standard does not cover protection for the head, hands and feet or protection against other hazards e.g. biological, radiological and electrical hazards. These aspects may be covered in other European Standards.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1486:2007(Main)
Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
EN 1486:2007

This European Standard considers requirements for the protection of the whole body including head, hands and feet. Clothing for head and feet according to this European Standard, however, may only provide sufficient protection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs 4.2 and 4.4 of this European Standard.
This European Standard specifies test methods and minimum performance requirements for reflective protective clothing used in specialised fire-fighting.
This clothing provides protection against flame lick and intense radiant heat and is worn for short periods only, to enable the fire-fighter to enter specific high-risk fire-fighting and fire rescue situations which also require the use of breathing apparatus.
This European Standard only covers protective clothing that relies upon the ability of the outer material to reflect intense radiant heat. This type of reflective clothing may also be used for industrial applications involving high levels of radiant heat.
The reflective clothing specified in this European Standard is not covered in EN 469.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 469:2020/oprA1:2022(Amendment)
Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities
EN 469:2020/FprA1

This document specifies minimum performance requirements for protective clothing designed to be worn during firefighting activities. The requirements detailed in this document cover design, heat and flame, mechanical, chemical, comfort, and visibility.
This document covers the general clothing design, the minimum performance levels of the material used, the methods of test to be used to determine these performance levels, marking and information supplied by the manufacturer.
This document makes distinction between firefighting activities dividing them into two performance levels based on a risk assessment:
-   Level 1: specifies the minimum requirements for firefighting clothing involving work associated with outdoor firefighting and their support activities, taking into account the environments and conditions of the expected operational scenarios of such firefighting activities.
The level 1 is not applicable for protection against risks encountered in fighting fires or rescue from fire activities in structures, unless combined to a level 2 or other specialized PPE.
-   Level 2: specifies the minimum requirements for firefighting clothing for risks encountered in fighting fires and rescue from fire in structures.
The distinction between Level 1 and Level 2 clothing is restricted to the requirements for heat and flame (X1 or X2 - Heat and Flame). These levels of protection can be reached by a single garment or a combination of separate garments.
Additional marking provides two grades of protection for Y (protection against water penetration) and Z (water vapour resistance). It is essential that these performance grades are indicated on the marking of the clothing and explained in the instructions for use.
This document does not cover protective clothing for wildland firefighting, specialized firefighting in a high amount of radiant heat where reflective clothing is required and/or advanced technical rescue operations dealing with hazardous chemicals, working with chainsaws and water and rope rescue.
This document does not cover protection for the head, hands and feet or specific protection against other hazards e.g. chemical, biological, radiological and electrical hazards. These aspects may be covered in other European Standards.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 469:2015(Main)
Protective clothing for firefighters - Performance requirements for protective clothing for firefighting
FprEN 469

This European Standard specifies minimum levels of performance requirements for protective clothing against heat and fire designed to be worn during firefighting operations, except protective clothing that is worn during fighting wildland fires (EN 15614) or specialized firefighting (EN 1486).
Within this European Standard, two performance levels are given for performance requirements 6.3, 6.4, 6.12 and 6.13:
-   thermal protection level two (marked with X2) is the higher level;
-   thermal level one (marked with X1) is the lower level.
This European Standard covers the general clothing design, the minimum performance levels of the materials used, the methods of test to be used to determine these performance levels, and marking and information supplied by the manufacturer.
Neither does this European Standard cover the protection against other hazards, such as chemical, electrical, biological, radiological or high-visibility hazards, nor does it cover the protection for the head, hands or feet. These aspects may be covered in other European Standards. However, the event of small accidental splashes of chemicals or flammable liquids is covered by this standard.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day