iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61967-4:2005/AC:2017

(Corrigendum)

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method (IEC 61967-4:2002/COR1:2017)

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method (IEC 61967-4:2002/COR1:2017)

Integrierte Schaltungen - Messung von elektromagnetischen Aussendungen im Frequenzbereich von 150 kHz bis 1 GHz - Teil 4: Messung der leitungsgeführten Aussendungen - Messung mit direkter 1 Ohm/150 Ohm-Kopplung (IEC 61967-4:2002/COR1:2017)

Circuits intégrés - Mesure des émissions électromagnétiques, 150 kHz à 1 GHz - Partie 4: Mesure des émissions conduites - Méthode par couplage direct 1 ohm/150 ohm (IEC 61967-4:2002/COR1:2017)

Integrirana vezja - Meritve elektromagnetnega sevanja, od 150 kHz do 1 GHz - 4. del: Meritve prevajanega sevanja - Metoda neposrednega sklopa 1 ohm/150 ohmov - Popravek AC (IEC 61967-4:2002/COR1:2017)

General Information

Status
Withdrawn
Publication Date
10-Aug-2017
Withdrawal Date
09-May-2024
ICS
31.200 - Integrated circuits. Microelectronics
33.100.10 - Emission
Technical Committee
I11 - Imaginarni 11
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
10-May-2024
Due Date
02-Jun-2024
Completion Date
10-May-2024
Ref Project
EN 61967-4:2002/AC:2017-07 - Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method

Relations

Replaced By
SIST EN IEC 61967-4:2021 - Integrated circuits - Measurement of electromagnetic emissions - Part 4: Measurement of conducted emissions, 1 ohm/150 ohm direct coupling method (IEC 61967-4:2021)
Effective Date
04-May-2021
Corrects
SIST EN 61967-4:2005 - Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -- Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method
Effective Date
07-Jun-2022

Buy Standard

EN 61967-4:2005/AC:2017EN 61967-4:2005/AC:2017
PreviousNext
Corrigendum
EN 61967-4:2005/AC:2017
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrirana vezja - Meritve elektromagnetnega sevanja, od 150 kHz do 1 GHz - 4. del: Meritve prevajanega sevanja - Metoda neposrednega sklopa 1 ohm/150 ohmov - Popravek AC (IEC 61967-4:2002/COR1:2017)Integrierte Schaltungen - Messung von elektromagnetischen Aussendungen im Frequenzbereich von 150 kHz bis 1 GHz - Teil 4: Messung der leitungsgeführten Aussendungen - Messung mit direkter 1 Ohm/150 Ohm-Kopplung (IEC 61967-4:2002/COR1:2017)Circuits intégrés - Mesure des émissions électromagnétiques, 150 kHz à 1 GHz - Partie 4: Mesure des émissions conduites - Méthode par couplage direct 1 ohm/150 ohm (IEC 61967-4:2002/COR1:2017)Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method (IEC 61967-4:2002/COR1:2017)33.100.10EmisijaEmission31.200Integrirana vezja, mikroelektronikaIntegrated circuits. MicroelectronicsICS:Ta slovenski standard je istoveten z:EN 61967-4:2002/AC:2017-07SIST EN 61967-4:2005/AC:2017en01-oktober-2017SIST EN 61967-4:2005/AC:2017SLOVENSKI
STANDARD



SIST EN 61967-4:2005/AC:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 61967-4:2002/AC:2017-07
July 2017
ICS 31.200 English Version
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method (IEC 61967-4:2002/COR1:2017)
Circuits intégrés - Mesure des émissions électromagnétiques, 150 kHz à 1 GHz - Partie 4: Mesure des émissions conduites - Méthode par couplage direct 1 ohm/150 ohm (IEC 61967-4:2002/COR1:2017)
Integrierte Schaltungen - Messung von elektromagnetischen Aussendungen im Frequenzbereich von 150 kHz bis 1 GHz - Teil 4: Messung der leitungsgeführten
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62433-3:2017(Main)
EMC IC modelling - Part 3: Models of Integrated Circuits for EMI behavioural simulation - Radiated emissions modelling (ICEM-RE) (IEC 62433-3:2017 )
EN 62433-3:2017

This part of IEC 62433 provides a method for deriving a macro-model to allow the simulation
of the radiated emission levels of an Integrated Circuit (IC). This model is commonly called
Integrated Circuit Emission Model – Radiated Emission, ICEM-RE. The model is intended to
be used for modelling a complete IC, with or without its associated package, a functional
block and an Intellectual Property (IP) block of both analogue and digital ICs (input/output
pins, digital core and supply), when measured or simulated data cannot be directly imported
into simulation tools.
The proposed IC macro-model will be inserted in 3D electromagnetic simulation tools so as to:
• predict the near-radiated emissions from the IC
• evaluate the effect of the radiated emissions on neighbouring ICs, cables, transmission
lines, etc.
This part of IEC 62433 has two main parts:
• the first is the electrical description of ICEM-RE macro-model elements,
• the second part proposes a universal data exchange format called REML based on XML.
This format allows encoding the ICEM-RE in a more useable and generic form for
emission simulation.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62433-2:2017(Main)
EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE) (IEC 62433-2:2017)
EN 62433-2:2017

IEC 62433-2:2008(E) specifies macro-models for ICs to simulate conducted electromagnetic emissions on a printed circuit board. The model is commonly called Integrated Circuit Emission Model - Conducted Emission (ICEM-CE). The ICEM-CE model can also be used for modelling an IC-die, a functional block and an Intellectual Property block (IP). The ICEM-CE model can be used to model both digital and analogue ICs. Basically, conducted emissions have two origins:  - conducted emmissions through power supply terminals and ground reference structure;  - conducted emmisions through input/output (I/O) terminals.  The ICEM-CE model addresses those two types of origins in a single approach. This standard defines structures and components of the macro-model for EMI simulation taking into account the IC's internal activities. This standard gives general data, which can be implemented in different formats or languages such as IBIS, IMIC, SPICE, VHDL-AMS and Verilog. SPICE is however chosen as default simulation environment to cover all the conducted emissions. This standard also specifies requirements for information that shall be incorporated in each ICEM-CE model or component part of the model for model circulation, but description syntax is not within the scope of this standard.

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62433-3:2017(Main)
EMC IC modelling - Part 3: Models of Integrated Circuits for EMI behavioural simulation - Radiated emissions modelling (ICEM-RE) (IEC 62433-3:2017 )
EN 62433-3:2017

This part of IEC 62433 provides a method for deriving a macro-model to allow the simulation
of the radiated emission levels of an Integrated Circuit (IC). This model is commonly called
Integrated Circuit Emission Model – Radiated Emission, ICEM-RE. The model is intended to
be used for modelling a complete IC, with or without its associated package, a functional
block and an Intellectual Property (IP) block of both analogue and digital ICs (input/output
pins, digital core and supply), when measured or simulated data cannot be directly imported
into simulation tools.
The proposed IC macro-model will be inserted in 3D electromagnetic simulation tools so as to:
• predict the near-radiated emissions from the IC
• evaluate the effect of the radiated emissions on neighbouring ICs, cables, transmission
lines, etc.
This part of IEC 62433 has two main parts:
• the first is the electrical description of ICEM-RE macro-model elements,
• the second part proposes a universal data exchange format called REML based on XML.
This format allows encoding the ICEM-RE in a more useable and generic form for
emission simulation.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62433-2:2017(Main)
EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE) (IEC 62433-2:2017)
EN 62433-2:2017

IEC 62433-2:2008(E) specifies macro-models for ICs to simulate conducted electromagnetic emissions on a printed circuit board. The model is commonly called Integrated Circuit Emission Model - Conducted Emission (ICEM-CE). The ICEM-CE model can also be used for modelling an IC-die, a functional block and an Intellectual Property block (IP). The ICEM-CE model can be used to model both digital and analogue ICs. Basically, conducted emissions have two origins:  - conducted emmissions through power supply terminals and ground reference structure;  - conducted emmisions through input/output (I/O) terminals.  The ICEM-CE model addresses those two types of origins in a single approach. This standard defines structures and components of the macro-model for EMI simulation taking into account the IC's internal activities. This standard gives general data, which can be implemented in different formats or languages such as IBIS, IMIC, SPICE, VHDL-AMS and Verilog. SPICE is however chosen as default simulation environment to cover all the conducted emissions. This standard also specifies requirements for information that shall be incorporated in each ICEM-CE model or component part of the model for model circulation, but description syntax is not within the scope of this standard.

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises.
This document
-   specifies:
-   technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing;
-   the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file;
-   associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security;
-   three different grades of safety/security, with the respective product functionalities required to achieve them;
-   the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities;
-   the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers;
-   describes:
-   the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS;
-   is intended to support the implementation of:
-   National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws);
-   gives relevant guidance on:
-   the organizational risk management;
-   does not replace the specifications of standards to the following systems:
-   fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems,
-   security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems,
-   applicable national standards on call systems.
All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems.
Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met.
This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management.
This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1751:2024(Main)
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves
EN 1751:2024

This document specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2 000 Pa.
The tests incorporated in this document will address:
-   leakage past a closed damper or valve (for classification see Annex C);
-   casing leakage (for classification see Annex C);
-   flow rate/pressure requirement characteristics;
-   torque: (see Annex A);
-   thermal transmittance: (see Annex B).
The acoustic testing of dampers and valves is not included in this document. The tests specified above apply to the following:
-   measurement of leakage past a closed damper or valve;
-   measurement of casing leakage;
-   determination of flow rate and pressure requirements;
-   measurement of torque characteristics (see Annex A);
-   measurement of thermal transfer characteristics to determine insulation properties (see Annex B).
NOTE   Certain aspects of the dynamic performance of dampers and/or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this document. Also, in common with other air distribution components, the results from tests carried out in accordance with this document may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50528:2024(Main)
Insulating ladders for use on or near low voltage electrical installations
EN 50528:2024

This document is applicable to portable ladders made only of non-conductive stiles, including accessories (pole leaning device, adjustable levelling device, adjustable ladder stabilizer, etc.) used to work on or near electrical systems and installations in the low voltage range (up to 1 000 V AC/1 500 V DC.).
These ladders are used, to provide temporary access, generally on overhead line structures and to undertake electrical operations. They are intended to be used by one person only.
These ladders, in conjunction with other protective equipment provide sufficient insulation level to protect against inadvertent contact with live low voltage installations.
This document does not cover ladders used for live working on electrical installations at voltages above 1 000 V AC and above 1 500 V DC. These insulating ladders are separately covered by EN 61478.
This document does not cover products not made entirely with non-conductive stiles generally called mixed ladders. In this case EN 131 series apply.
This document does not cover step stools which are covered by EN 14183.
These ladders are only for professional use. Only skill persons, after an appropriate training can use this type of ladder for professional applications.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use (where appropriate).

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16867:2020+A2:2024(Main + Amendment)
Building hardware - Mechatronic door furniture - Requirements and test methods
EN 16867:2020+A2:2024

1.1   General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2   Exclusions
This document does not cover:
-   mechatronic cylinders according to EN 15684;
-   electromechanical operated locks and striking plates according to EN 14846.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6806:2024(Main)
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2024)
EN ISO 6806:2024

ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.
The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13557:2024(Main)
Cranes - Controls and control stations
EN 13557:2024

This document specifies health and safety design requirements for control devices and control stations for all types of cranes.
Specific requirements for particular types of crane are given in the appropriate European standard for the particular crane type.
Control systems are covered by other standards, e.g. EN 60204-32:2008 and EN 13135:2013+A1:2018.
This document does not deal with noise hazards because these are dealt with in safety standards for specific types of cranes. It also does not address the design of the cabin with regard to its sound insulation properties.
This document covers specific hazards, which could occur during the use of control devices and control stations. It does not cover hazards, which could occur during transport, construction, modification, de-commissioning or disposal. The hazards covered by this standard are identified in Clause 4.
This document is applicable after the date of approval by CEN of this standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day