SIST EN 60851-3:2001/A2:2004
(Amendment)Winding wires - Test methods -- Part 3: Mechanical properties
Winding wires - Test methods -- Part 3: Mechanical properties
A standard for a framework, which will serve as a common basis for identifying and co-ordinating standards development for computer-based modelling of enterprises, focusing on Computer Integrated Manufacturing. Models generated using constructs themselves defined in accordance to this framework will be computer enactable and enable business process model based decision support leading to model based monitoring and control.
Wickeldrähte - Prüfverfahren -- Teil 3: Mechanische Eigenschaften
Fils de bobinage - Méthodes d'essai -- Partie 3: Propriétés mécaniques
Navijalne žice - Preskusne metode - 3. del: Mehanične lastnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60851-3:2001/A2:2004
STANDARD
september 2004
Navijalne žice - Preskusne metode - 3. del: Mehanične lastnosti
Winding wires - Test methods - Part 3: Mechanical properties
ICS 29.060.10 Referenčna številka
SIST EN 60851-3:2001/A2:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60851-3/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2003
ICS 29.060.10
English version
Winding wires –
Test methods
Part 3: Mechanical properties
(IEC 60851-3:1996/A2:2003)
Fils de bobinage – Wickeldrähte –
Méthodes d'essai Prüfverfahren
Partie 3: Propriétés mécaniques Teil 3: Mechanische Eigenschaften
(CEI 60851-3:1996/A2:2003) (IEC 60851-3:1996/A2:2003)
This amendment A2 modifies the European Standard EN 60851-3:1996; it was approved by CENELEC
on 2003-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60851-3:1996/A2:2003 E
---------------------- Page: 2 ----------------------
EN 60851-3:1996/A2:2003 - 2 -
Foreword
The text of document 55/861/FDIS, future amendment 2 to IEC 60851-3:1996, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A2 to EN 60851-3:1996 on 2003-12-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-09-01
– latest date by which the national standards conflicting
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.