SIST EN ISO 4788:2005
(Main)Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005)
Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005)
ISO 4788:2005 specifies dimensions, material and constructional and metrological requirements of graduated measuring cylinders of tall form (Type 1a and Type 1b) and of squat form (Type 2). All types are suitable for general laboratory use.
The specifications in ISO 4788:2005 are in conformity with the principles of design and construction of volumetric glassware given in ISO 384.
Laborgeräte aus Glas - Messzylinder und Mischzylinder (ISO 4788:2005)
Diese Internationale Norm legt Anforderungen für Maße, Werkstoffe, Ausführung sowie messtechnische Anforderungen an Mess- und Mischzylinder der hohen Form (Bauform 1a und 1b) und der niedrigen Form (Bauform 2) fest. Alle Ausführungen sind für den allgemeinen Laborgebrauch geeignet.
Die Anforderungen dieser Internationalen Norm entsprechen den in ISO 384 festgelegten Grundlagen für Gestaltung und Bau von Volumenmessgeräten aus Glas.
Verrerie de laboratoire - Eprouvettes graduées cylindriques (ISO 4788:2005)
L'ISO 4788:2005 spécifie des dimensions, des exigences de matériaux, de construction et de métrologie pour les éprouvettes graduées cylindriques de forme haute (type 1a et 1b) et de forme basse (type 2). Tous les types conviennent à des utilisations courantes de laboratoire.
Les spécifications de l'ISO 4788:2005 sont en conformité avec les principes de conception et de construction de la verrerie volumétrique, donnés dans l'ISO 384.
Laboratorijska steklovina - Graduirani merilni valji (ISO 4788:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4788:2005
01-junij-2005
Laboratorijska steklovina - Graduirani merilni valji (ISO 4788:2005)
Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005)
Laborgeräte aus Glas - Messzylinder und Mischzylinder (ISO 4788:2005)
Verrerie de laboratoire - Eprouvettes graduées cylindriques (ISO 4788:2005)
Ta slovenski standard je istoveten z: EN ISO 4788:2005
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
SIST EN ISO 4788:2005 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4788:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 4788:2005
EUROPEAN STANDARD
EN ISO 4788
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2005
ICS 17.060
English version
Laboratory glassware - Graduated measuring cylinders (ISO
4788:2005)
Verrerie de laboratoire - Eprouvettes graduées cylindriques Laborgeräte aus Glas - Messzylinder und Mischzylinder
(ISO 4788:2005) (ISO 4788:2005)
This European Standard was approved by CEN on 29 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4788:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4788:2005
EN ISO 4788:2005 (E)
Foreword
This document (EN ISO 4788:2005) has been prepared by Technical Committee ISO/TC 48
"Laboratory glassware and related apparatus" in collaboration with Technical Committee
CEN/TC 332 "Laboratory equipment", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2005, and conflicting national
standards shall be withdrawn at the latest by November 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 4788:2005 has been approved by CEN as EN ISO 4788:2005 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4788:2005
INTERNATIONAL ISO
STANDARD 4788
Second edition
2005-05-01
Laboratory glassware — Graduated
measuring cylinders
Verrerie de laboratoire — Éprouvettes graduées cylindriques
Reference number
ISO 4788:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 4788:2005
ISO 4788:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 4788:2005
ISO 4788:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4788 was prepared by Technical Committee ISO/TC 48, Laboratory glassware and related apparatus,
Subcommittee SC 6, Laboratory and volumetric ware.
This second edition cancels and replaces the first edition (ISO 4788:1980), which has been technically revised
to incorporate the following changes:
a) three types of graduated measuring cylinders have been specified;
b) two classes of accuracy have been introduced;
c) cylinders of squat form have been added;
d) marking of cylinders has been changed;
e) capacity at lowest graduation line for 5 ml and 10 ml cylinders has been increased.
© ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 4788:2005
ISO 4788:2005(E)
Introduction
The first edition of this International Standard (ISO 4788:1980) was originally written when the use of
measuring cylinders was largely limited to the approximate dispensing of reagents in wet chemical analytical
procedures; only one grade of accuracy was specified.
More recently, with the increasing demand for accreditation and changing uses to which measuring cylinders
are put, a significant demand has emerged worldwide for a more accurate class to complement the originally
specified range.
Also, with more work being carried out in laminar-flow cabinets, glove boxes and fume extraction hoods, in
which working heights are restricted, a need for short (squat) measuring cylinders has emerged.
This International Standard addresses these two needs, and has been prepared to meet the requirements of
ISO 384. This International Standard includes
a) spouted measuring cylinders of traditional (tall) form, accuracy classes A and B,
b) stoppered measuring cylinders of traditional (tall) form, accuracy classes A and B, and
c) spouted measuring cylinders of squat form, accuracy class B.
Class A has been considered for the third type (squat cylinders) but discounted because ISO 384
requirements would only be met by cylinders having manufacturing specifications which would be virtually
impossible to satisfy.
iv © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4788:2005
INTERNATIONAL STANDARD ISO 4788:2005(E)
Laboratory glassware — Graduated measuring cylinders
1 Scope
This International Standard specifies dimensions, material and constructional and metrological requirements
of graduated measuring cylinders of tall form (Type 1a and Type 1b) and of squat form (Ty
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.