SIST-TS CEN/TS 16454:2013
(Main)Intelligent transport systems - ESafety - ECall end to end conformance testing
Intelligent transport systems - ESafety - ECall end to end conformance testing
This Technical Specification defines the key actors in the eCall chain of service provision as:
1) In-Vehicle System (IVS)/vehicle,
2) Mobile network Operator (MNO),
3) Public safety assistance point [provider](PSAP),
in some circumstances may also involve:
4) Third Party Service Provider (TPSP),
and to provide conformance tests for actor groups 1) – 4).
NOTE Conformance tests are not appropriate nor required for vehicle occupants, although they are the recipient of the service. The Scope covers conformance testing (and approval) of new engineering developments, products and systems, and does not imply testing associated with individual installations in vehicles or locations.
Intelligente Transportsysteme - ESicherheit - Ende Konformitätstests Ende
Systèmes de transport intelligents - ESafety - De bout en bout les essais de conformité
La présente Spécification technique définit les principaux acteurs dans la chaîne de fourniture du service eCall comme étant :
1) Système embarqué (IVS) / véhicule,
2) Opérateur de réseau mobile (MNO),
3) Point d´accès aux services de sécurité publique [fournisseur] (PSAP),
dans certaines circonstances, ils peuvent également inclure :
4) Fournisseur de service tiers (TPSP),
et la réalisation des essais de conformité pour les groupes d’acteurs 1) – 4).
NOTE Les essais de conformité ne conviennent pas et ne sont pas requis pour les occupants des véhicules, bien que ces derniers soient les bénéficiaires du service.
Le domaine d’application couvre les essais de conformité (et l’homologation) des nouveaux développements techniques, produits et systèmes et n’implique par les essais associés aux installations individuelles dans les véhicules ou sur les sites.
Inteligentni transportni sistemi - e-Varnost - Preskušanje skladnosti e-klica v zvezi pošiljatelj-prejemnik
Te tehnične specifikacije določajo ključne udeležence v verigi izvedbe storitev e-klica, kot so:
1) avtomobilski sistem (IVS)/vozilo,
2) operaterji mobilnih omrežij (MNO),
3) center za pomoč (ponudnik)(PSAP),
v nekaterih okoliščinah lahko vključuje tudi:
4) ponudnika storitev tretje strani (TPSP)
in zagotavlja preskuse skladnosti za skupine udeležencev 1) – 4).
OPOMBA Preskusi skladnosti niso primerni in zahtevani za potnike v vozilu, čeprav so prejemniki storitve. Področje uporabe zajema preskuse skladnosti (in potrditev) novih inženirskih dosežkov, izdelkov in sistemov ter ne zahteva preskusov, povezanih s posameznimi vgradnjami v vozila ali na lokacije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16454:2013
01-september-2013
Inteligentni transportni sistemi - e-Varnost - Preskušanje skladnosti e-klica v zvezi
pošiljatelj-prejemnik
Intelligent transport systems - ESafety - ECall end to end conformance testing
Intelligente Transportsysteme - ESicherheit - Ende Konformitätstests Ende
Systèmes de transport intelligents - ESafety - De bout en bout les essais de conformité
Ta slovenski standard je istoveten z: CEN/TS 16454:2013
ICS:
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
SIST-TS CEN/TS 16454:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16454:2013
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16454:2013
TECHNICAL SPECIFICATION
CEN/TS 16454
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
June 2013
ICS 35.240.60; 03.220.20
English Version
Intelligent transport systems - ESafety - ECall end to end
conformance testing
Systèmes de transport intelligents - ESafety - De bout en Intelligente Transportsysteme - eSicherheit - Vollständige
bout les essais de conformité Konformitätsprüfungen für eCall
This Technical Specification (CEN/TS) was approved by CEN on 31 December 2012 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16454:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16454:2013
CEN/TS 16454:2013 (E)
Contents Page
Foreword .8
Introduction .9
1 Scope . 10
2 Conformance . 10
2.1 General . 10
2.2 General conditions . 10
3 Normative references . 11
4 Terms and definitions . 13
5 Symbols and abbreviations . 17
6 General overview of the eCall transaction for pan-European eCall . 18
7 How to use this standard . 22
7.1 Layout and procedures . 22
7.2 System under test . 23
7.3 Accelerated test procedures . 23
7.4 Accelerated test procedures for IVSs . 24
7.4.1 Accelerated test procedures for all types of PE eCall IVS . 24
7.4.2 Additional accelerated test procedures for PE eCall only IVS . 25
7.5 Accelerated test procedures for MNOs . 26
7.6 Accelerated test procedures for PSAPs – PE eCall . 27
7.7 Accelerated test procedures for PSAPs – TPS-eCall . 28
7.8 Accelerated test procedures for TPSPs . 28
8 Requirements . 28
8.1 Requirements - General objectives . 28
8.1.1 State transitions . 28
8.1.2 Classification of testing . 39
8.1.3 CTP naming conventions . 41
8.1.4 CTP naming convention for IVS conformance tests . 42
8.2 CTP structure . 42
9 Conformance test requirements for in-vehicle user equipment and systems (IVS) . 44
9.1 Conformance test requirements for in-vehicle user equipment and systems for Pan
European eCall . 44
9.2 Test objectives and purposes . 44
9.3 Classification of testing and referenced tests for in-vehicle user equipment for Pan
European eCall IVS . 44
9.3.1 Taxonomy of testing . 44
9.3.2 Referenced tests . 44
9.4 State transition conformance tests for in-vehicle equipment and system to comply to
standards for pan European eCall . 45
9.4.1 Conformance requirement . 45
9.4.2 Use case test objectives by stage. 45
9.4.3 CTP 1.1.0.1 Conformance to ETSI TS 102 936-1 and ETSI TS 102 936-2 – PE eCall IVS . 48
9.4.4 CTP 1.1.0.2 Test for conformance to valid SIM/USIM – PE eCall . 49
9.4.5 CTP 1.1.0.3 Automatic eCall triggering does not occur when ignition OFF – PE eCall
IVS . 50
9.4.6 CTP 1.1.1.1 Power on and self test – PE eCall IVS . 51
9.4.7 CTP 1.1.2.1 eCall automatically activated – PE eCall IVS . 52
9.4.8 CTP 1.1.2.2 Automatically triggered eCall in progress was not disconnected upon a
new eCall trigger – PE eCall IVS . 53
2
---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 16454:2013
CEN/TS 16454:2013 (E)
9.4.9 CTP 1.1.2.3 Post-side-crash performance of automatic trigger - IVS . 54
9.4.10 CTP 1.1.2.4 Post-frontal-crash performance of automatic trigger - IVS . 55
9.4.11 CTP 1.1.2.5 Performance of automatic trigger – different crash types - IVS. 56
9.4.12 CTP 1.1.3.1 eCall manually activated – PE eCall IVS . 57
9.4.13 CTP 1.1.3.2 Manually triggered eCall in progress was not disconnected upon a new
eCall trigger – PE eCall IVS . 58
9.4.14 CTP 1.1.4.1 Test eCall activated – PE eCall IVS . 59
9.4.15 CTP 1.1.5.1 Network registration – PE eCall IVS . 60
9.4.16 CTP 1.1.5.2 Manual termination of eCall by vehicle occupants not allowed
(automatically triggered eCall) – PE eCall IVS. 61
9.4.17 CTP 1.1.5.3 Manual termination of eCall by vehicle occupants not allowed (manually
triggered eCall) – PE eCall IVS . 62
9.4.18 CTP 1.1.5.4 Automatically triggered eCall in progress was not disconnected when
ignition is switched to OFF – PE eCall IVS . 63
9.4.19 CTP 1.1.5.5 Manually triggered eCall in progress was not disconnected when ignition
is switched to OFF – PE eCall IVS . 64
9.4.20 CTP 1.1.5.6 Priority over conflicting communication – PE eCall IVS . 65
9.4.21 CTP 1.1.5.7 Network registration is re-tried when network registration attempt was not
successful – PE eCall IVS . 66
9.4.22 CTP 1.1.6.1 Mute IVS and vehicle audio – PE eCall IVS . 66
9.4.23 CTP 1.1.7.1 Set-up TS12 call with eCall identifier (flag) set to ‘automatic’ – PE eCall IVS . 67
9.4.24 CTP 1.1.8.1 Set-up TS12 call with eCall identifier (flag) set to ‘manual’ – PE eCall IVS . 68
9.4.25 CTP 1.1.9.1 Set-up TS11 call to test number – PE eCall IVS . 69
9.4.26 CTP 1.1.10.1 eCall is attempted when no networks are available (limited service
condition) – PE eCall IVS . 70
9.4.27 CTP 1.1.10.2 Re-dial attempt completed within 2 min after eCall is dropped – PE eCall
IVS . 71
. 71
9.4.28 CTP 1.1.10.3 Duration of eCall Initiation signal – PE eCall IVS . 72
9.4.29 CTP 1.1.11.1 Send MSD with indicator set to ‘Automatically Initiated eCall’ (AleC) – PE
eCall IVS . 73
9.4.30 CTP 1.1.12.1 Send MSD with indicator set to ‘Manually Initiated eCall’ (MleC) – PE eCall
IVS . 74
9.4.31 CTP 1.1.13.1 Send MSD with indicator set to ‘Test Call’ – PE eCall IVS . 75
9.4.32 CTP 1.1.14.1 Verify MSD transfer – PE eCall IVS . 76
9.4.33 CTP 1.1.14.2 Un-mute IVS audio when AL-ACK received – PE eCall IVS . 77
9.4.34 CTP 1.1.15.1 Establish voice link to PSAP – PE eCall IVS . 78
9.4.35 CTP 1.1.15.2 MSD transfer request while eCall conversation in progress – PE eCall IVS . 79
9.4.36 CTP 1.1.15.3 Call continuation when SEND MSD request not received (T5 expired) – PE
eCall IVS . 81
9.4.37 CTP 1.1.15.4 Call continuation when AL-ACK not received (T6 expired) – PE eCall IVS . 82
9.4.38 CTP 1.1.15.5 MSD is transferred continuously until T7 expires and IVS reconnects
loudspeaker and microphone on its expiry – PE eCall IVS . 83
9.4.39 CTP 1.1.16.1 Clear down call automatically – PE eCall IVS . 84
9.4.40 CTP 1.1.16.2 IVS clears down the eCall upon T2 expiry – PE eCall IVS . 85
9.4.41 CTP 1.1.16.3 IVS registers recent eCalls – PE eCall IVS . 86
9.4.42 CTP 1.1.17.1 Call-back allowed by IVS – PE eCall IVS. 87
9.4.43 CTP 1.1.17.2 Call-back answered by IVS – PE eCall IVS . 88
9.4.44 CTP 1.1.17.3 MSD transfer occurs upon PSAP request during call-back – PE eCall IVS . 89
9.4.45 CTP 1.1.17.4 Remain registered for ≥1 hr – PE eCall IVS . 90
9.5 State transition test scripts for in-vehicle equipment and system to comply to standards
for pan European eCall – additional tests for eCall only systems . 91
9.5.1 General . 91
9.5.2 CTP 1.1.1.2 IVS does not perform registration after power-up – PE eCall only IVS . 92
9.5.3 CTP 1.1.1.3 IVS periodically scans and maintains a list of available PLMNs – PE eCall
only . 92
9.5.4 CTP1.1.10.4 Verify that PLMN registration procedure is executed upon initiating an
eCall – PE eCall only IVS . 93
9.5.5 CTP 1.1.17.5 Remain registered for ≥1 hr ≤12 hr – PE eCall only IVS . 94
9.6 State transition conformance test requirements for in-vehicle user equipment for eCall
TPS-IVS via a third party service provider . 95
3
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 16454:2013
CEN/TS 16454:2013 (E)
9.6.1 General . 95
9.6.2 Test objectives and purposes . 95
9.6.3 Taxonomy of testing and referenced tests . 95
9.6.4 Taxonomy of testing . 95
9.7 Use case conformance tests for in-vehicle equipment and system to comply to standards
for third party service provider eCall . 95
9.7.1 Conformance requirement . 95
9.7.2 Use case test objectives by stage. 96
9.8 State transition test scripts for TPS in-vehicle equipment and system to comply to
standards for third party services supported eCall . 98
9.8.1 General . 98
9.8.2 CTP 1.2.0 Pre operation - TPS-IVS . 99
9.8.3 CTP 1.2.1 Power on self test - TPS-IVS . 101
9.8.4 CTP 1.2.2 Automatically activate eCall - TPS-IVS . 103
9.8.5 CTP 1.2.3 Manually activate eCall - TPS-IVS . 111
9.8.6 CTP 1.2.4 Stop conflicting communication – TPS-IVS . 115
9.8.7 CTP 1.2.5 Establish voice link to TPSP - TPS-IVS . 116
9.8.8 CTP 1.2.6 Send IVS dataset to TPSP - TPS-IVS . 120
9.8.9 CTP 1.2.7 Establish voice link between PSAP and occupants - TPS-IVS . 124
9.8.10 CTP 1.2.8 Cleardown call - TPS-IVS . 125
9.8.11 CTP 1.2.9 Allow call-cack into vehicle - TPS-IVS. 126
10 Conformance tests for mobile network operators . 130
10.1 Test objectives and purposes . 130
10.1.1 General . 130
10.1.2 Default assumptions . 130
10.2 Taxonomy of testing and referenced tests . 130
10.3 Use case conformance tests for mobile network operator systems to comply to standards
for pan European eCall . 130
10.3.1 Conformance requirement . 130
10.3.2 Use case test objectives by stage. 130
10.4 State transition test scripts for mobile network operators to demonstrate compliance with
Pan European eCall standards . 132
10.4.1 General . 132
10.4.2 CTP 2.0.1 Keep SIMs/USIMs alive even though not in regular operation – MNO . 133
10.4.3 CTP 2.0.2 MNO supports general eCall relevant requirements . 134
10.4.4 CTP 2.0.3 Decommission SIM/USIM - MNO . 135
10.4.5 CTP 2.0.4 Support eCall Flag – MNO . 136
10.4.6 CTP 2.1.1 Accept registration – Home network – MNO . 137
10.4.7 CTP 2.1.2 Accept registration – Roaming –MNO . 138
10.4.8 CTP 2.2.1.1 Receive TS12 voice call (automatically initiated) – MNO . 139
10.4.9 CTP 2.2.1.2 Route call to ‘most appropriate’ PSAP – MNO . 140
10.4.10 CTP 2.2.1.3 Provide TS12 data/caller ID – MNO . 141
10.4.11 CTP 2.2.2.1 Receive TS12 voice call (manual initiated) – MNO . 142
10.4.12 CTP 2.2.3.1 Test for receiving test eCall (TS11) . 143
10.4.13 CTP 2.2.3.2 Route call to non-emergency number – MNO . 144
10.4.14 CTP 2.2.3.3 Provide TS11 data – MNO . 145
10.4.15 CTP 2.3.1 Call in progress–MNO . 145
10.4.16 CTP 2.4.1 Call cleardown – MNO . 146
10.4.17 CTP 2.5.1 Support call-back – MNO . 147
10.4.18 CTP 2.6.1 Maintain registration for 1-12 h – MNO . 147
10.4.19 CTP 2.7.1 Maintain call records - MNO . 147
10.5 Use case conformance tests for mobile network operator systems to comply to standards
for TPS-eCall . 148
10.5.1 Conformance requirement . 148
10.5.2 Use case test objectives by stage. 148
10.6 State transition test scripts for mobile network operators to demonstrate compliance with
TPS-eCall standards . 149
10.6.1 CTP 2.11.1 MNO supports general TPS-eCall relevant requirements . 149
10.6.2 CTP 2.11.2 Support call-back – MNO . 150
11 Conformance tests for PSAP systems . 151
4
---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 16454:2013
CEN/TS 16454:2013 (E)
11.1 Test objectives and purposes . 151
11.2 Taxonomy of testing and referenced tests . 151
11.2.1 Taxonomy of testing . 151
11.2.2 Referenced tests . 151
11.3 Use case conformance tests for PSAP systems to comply to standards for pan European
eCall . 151
11.3.1 Conformance requirement. 151
11.3.2 Use case test objectives by stage . 151
11.4 State transition conformance tests for PSAPs – PE eCall . 152
11.4.1 General . 152
11.4.2 CTP 3.1.0.1 Provide MNOs with appropriate routing data – PSAP PE eCall . 154
11.4.3 CTP 3.1.0.2 Maintain map geo-information – PSAP PE eCall . 155
11.4.4 CTP 3.1.1.1 Receive automatically initiated eCall – PSAP PE eCall . 156
11.4.5 CTP 3.1.1.2 Receive manually initiated eCall – PSAP PE eCall . 157
11.4.6 CTP 3.1.2 Receive TS12 data- Caller ID & location – PSAP PE eCall . 158
11.4.7 CTP 3.1.3.1 Recognise eCall and route to in-band modem – PSAP PE eCall . 159
11.4.8 CTP 3.1.3.2 PSAP equipment failure – PSAP PE eCall . 160
11.4.9 CTP 3.1.3.3 PSAP modem failure before link layer ACK is sent – PSAP PE eCall . 161
11.4.10 CTP 3.1.4 eCall received at in-band modem – PSAP PE eCall . 162
11.4.11 CTP 3.1.5.1 Validate initiation signal – PSAP PE eCall . 163
11.4.12 CTP 3.1.5.2 Route to operator after T4 expiration – PSAP PE eCall . 164
11.4.13 CTP 3.1.6 Request MSD – PSAP PE eCall . 165
11.4.14 CTP 3.1.7.1 Receive MSD – PSAP PE eCall . 166
11.4.15 CTP 3.1.7.2 Verify status bit in AL-ACK upon positive ACK– PSAP PE eCall . 167
11.4.16 CTP 3.1.7.3 Verify MSD transfer upon T8 expiration – PSAP PE eCall . 168
11.4.17 CTP 3.1.7.4 Verify transfer of corrupted MSD – PSAP PE eCall . 169
11.4.18 CTP 3.1.7.5 Verify PSAP behaviour when MSD format check fails– PSAP PE eCall . 170
11.4.19 CTP 3.1.8 ACK – PSAP PE eCall . 170
11.4.20 CTP 3.1.9 Route voice and MSD to operator – PSAP PE eCall . 171
11.4.21 CTP 3.1.10 Display TS12 data and MSD to operator – PSAP PE eCall . 172
11.4.22 CTP 3.1.11 Decode VIN – PSAP PE eCall . 173
11.4.23 CTP 3.1.12 Talk to vehicle occupants – PSAP PE eCall . 174
11.4.24 CTP 3.1.13 Request new MSD before call cleardown – PSAP PE eCall . 175
11.4.25 CT
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.