Audio/video, information and communication technology equipment - Part 1: Safety requirements

EN IEC 62368 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This standard does not include requirements for performance or functional characteristics of equipment. This part of IEC 62368 is also applicable to: - components and subassemblies intended for incorporation in this equipment. Such components and subassemblies need not comply with every requirement of the standard, provided that the complete equipment, incorporating such components and subassemblies, does comply; - external power supply units intended to supply other equipment within the scope of this part of IEC 62368; - accessories intended to be used with equipment within the scope of this part of IEC 62368. This part of IEC 62368 does not apply to power supply systems which are not an integral part of the equipment, such as motor-generator sets, battery backup systems and distribution transformers. This part of IEC 62328 specifies safeguards for ordinary persons, instructed persons, and skilled persons. Additional requirements may apply for equipment that is clearly designed or intended for use by children or specifically attractive to children. This standard assumes an altitude of 2 000 m unless specified otherwise by the manufacturer. This part of IEC 62368 does not apply to equipment to be used in wet areas. Additional requirements may apply. Additional requirements for equipment intended for outdoor installation are given in IEC 60950-22. This part of IEC 62368 does not address: - manufacturing processes except safety testing; - injurious effects of gases released by thermal decomposition or combustion; - disposal processes; - effects of transport (other than as specified in this standard); - effects of storage of materials, components, or the equipment itself; - the likelihood of injury from particulate radiation such as alpha particles and beta particles; - the likelihood of thermal injury due to radiated or convected thermal energy; - the likelihood of injury due to flammable liquids; - the use of the equipment in oxygen-enriched or explosive atmospheres; - exposure to chemicals other than as specified in Clause 7; - electrostatic discharge events; - environmental aspects; - requirements for functional safety.

/

/

L'IEC 62368-1:2014 s'applique à la sécurité de l'équipement électrique et électronique dans le domaine des technologies audio, vidéo, d'information et de communication, et des machines commerciales ou de bureau dont la tension assignée est inférieure ou égale à 600 V. La présente norme ne contient ni les exigences de performances ni les caractéristiques fonctionnelles de l'équipement. Des exemples d'équipement relevant du domaine d'application de la présente norme sont donnés dans l'Annexe A. Une tension assignée de 600 V est considérée inclure les équipements ayant une tension assignée de 400/690V. La présente partie de la CEI 62368 s'applique également: aux composants et aux sous-ensembles destinés à être intégrés dans cet équipement. Il n'est pas nécessaire que ces composants et sous-ensembles soient conformes à toutes les exigences présentées dans la norme, à condition que l'équipement complet, qui intègre ces composants et sous-ensembles, le soit, aux alimentations externes destinées à alimenter d'autres équipements entrant dans le domaine d'application de la présente partie de la CEI 62368 et aux accessoires destinés à être utilisés avec des équipements entrant dans le domaine d'application de la présente partie de la CEI 62368. La présente partie de la CEI 62368 ne s'applique pas aux systèmes d'alimentation électrique ne faisant pas partie intégrante de l'équipement, tels que les groupes convertisseurs, les systèmes de batterie de secours et les transformateurs de distribution. La présente partie de la CEI 62368 spécifie des protections pour les personnes ordinaires, les personnes averties et les personnes qualifiées. Des exigences supplémentaires peuvent s'appliquer aux équipements clairement conçus ou destinés à être utilisés par des enfants ou particulièrement attrayants pour les enfants. Cette deuxième édition annule et remplace la première édition publiée en 2010. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - addition des exigences pour les LED; - nouvelles exigences pour les dispositifs montés sur un mur et un plafond; - addition des exigences relatives aux chocs acoustiques pour les lecteurs de musique individuels; - révision des exigences relatives aux piles et batteries, avec de nouvelles exigences concernant les piles et accumulateurs boutons; - révision des exigences relatives aux brûlures. Mots-clés: Audio/Vidéo, Protection, Information, Communication

Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - 1. del: Varnostne zahteve (IEC 62368-1:2014, spremenjen)

Standard EN IEC 62368 se uporablja za varnost električne in elektronske opreme na področju avdio, video, informacijske in komunikacijske tehnologije ter poslovnih in pisarniških strojev z nazivno napetostjo pod 600 V. Ta standard ne vključuje zahtev za značilnosti delovanja ali funkcijske značilnosti opreme. Ta del standarda ISO 62368 se ne uporablja za: – komponente in podsestave, namenjene vgradnji v to opremo. Skladnost takih komponent in podsestavov z vsako zahtevo iz standarda ni potrebna, če je skladna celotna oprema, ki vključuje take komponente in podsestave; – zunanje napajalne enote, namenjene napajanju druge opreme znotraj področja uporabe tega dela standarda IEC 62368; – dodatke, namenjene uporabi z opremo znotraj področja uporabe tega dela standarda IEC 62368. Ta del standarda IEC 62368 se ne uporablja za napajalne sisteme, ki niso sestavni del opreme, kot so motorni-generatorski kompleti, baterijski pomožni sistemi in distribucijski transformatorji. Ta del standarda IEC 62328 podaja varnostne ukrepe za navadne, poučene in usposobljene osebe. Dodatne zahteve se lahko uporabljajo za opremo, ki je jasno zasnovana ali namenjena za uporabo otrok ali je zlasti privlačna za otroke. Ta standard predvideva višino 2000 m, če proizvajalec ne določi drugače. Ta del standarda IEC 62368 ne velja za opremo, ki se uporablja na mokrih območjih. Uporabljajo se lahko dodatne zahteve. Dodatne zahteve za opremo, namenjeno postavitvi na prostem, so podane v standardu IEC 60950-22. Ta del standarda IEC 62368 ne obravnava: – proizvodnih procesov, razen preskušanja varnosti; – škodljivih učinkov plinov, sproščenih med toplotnim razkrajanjem ali zgorevanjem; – procesov odstranjevanja; – učinkov prevoza (razen učinkov, navedenih v tem standardu); – učinkov hranjenja materialov, komponent ali same opreme; – verjetnosti poškodb zaradi sevanja delcev, kot so delci alfa in beta; – verjetnosti toplotne poškodbe zaradi sevane toplotne energije ali toplotne energije, prenesene s konvekcijo; – verjetnosti poškodbe zaradi vnetljivih tekočin; – uporabe opreme v s kisikom obogatenih ali eksplozivnih atmosferah; – izpostavljenosti kemikalijam poleg kemikalij, navedenih v točki 7; – primerov elektrostatične izpraznitve; – okoljskih vidikov; – zahtev glede funkcionalne varnosti.

General Information

Status
Published
Publication Date
25-Sep-2014
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
26-Sep-2014
Due Date
01-Dec-2014
Completion Date
26-Sep-2014

RELATIONS

Buy Standard

Standard
SIST EN 62368-1:2014 - BARVE !!
English language
348 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62368-1:2014
01-november-2014
Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - 1. del:
Varnostne zahteve (IEC 62368-1:2014, spremenjen)

Audio/video, information and communication technology equipment - Part 1: Safety

requirements
Ta slovenski standard je istoveten z: EN 62368-1:2014
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
SIST EN 62368-1:2014 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62368-1:2014
---------------------- Page: 2 ----------------------
SIST EN 62368-1:2014
EUROPEAN STANDARD EN 62368-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 33.160.01; 35.020
English Version
Audio/video, information and communication technology
equipment - Part 1: Safety requirements
(IEC 62368-1:2014 , modified)

Equipements des technologies de l'audio/vidéo, de Einrichtungen für Audio/Video, Informations- und

l'information et de la communication - Partie 1: Exigences Kommunikationstechnik - Teil 1: Sicherheitsanforderungen

de sécurité (IEC 62368-1:2014 , modifiziert)
(CEI 62368-1:2014 , modifiée)

This European Standard was approved by CENELEC on 2014-06-20. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62368-1:2014 E
---------------------- Page: 3 ----------------------
SIST EN 62368-1:2014
EN 62368-1:2014 - 2 -
Foreword

The text of document 108/521/FDIS, future edition 2 of IEC 62368-1:2014, prepared by IEC/TC 108

"Safety of electronic equipment within the field of audio/video, information technology and

communication technology" was submitted to the IEC-CENELEC parallel vote and approved by

CENELEC as EN 62368-1:2014.

A draft amendment, which covers common modifications to IEC 62368-1:2014, was prepared by

CLC/TC 108X, "Safety of electronic equipment within the fields of Audio/Video, Information Technology

and Communication Technology" and approved by CENELEC.
The following dates are fixed:
(dop) 2015-06-20
• latest date by which this document has to be implemented at
national level by publication of an identical
national standard or by endorsement
(dow) 2019-06-20
• latest date by which the national standards conflicting with this
document have to be withdrawn

Clauses, subclauses, notes, tables, figures and annexes which are additional to those in

IEC 62368-1:2014 are prefixed “Z”.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such

patent rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment

Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Requirement of sound pressure for personal music player addressed by the mandate M/452 are

covered in 10.6 "Safeguards against acoustic energy sources".

For equipment falling within the scope of directives other than those against which this standard is

harmonized, additional requirements from those directives may apply.
---------------------- Page: 4 ----------------------
SIST EN 62368-1:2014
- 3 - EN 62368-1:2014
Endorsement notice

The text of the International Standard IEC 62368-1:2014 was approved by CENELEC as a European

Standard with agreed common modifications.
COMMON MODIFICATIONS
CONTENTS Add the following annexes:
Annex ZA (normative) Normative references to international publications with
their corresponding European publications
Annex ZB (normative) Special national conditions
Annex ZC (informative) A-deviations
Annex ZD (informative) IEC and CENELEC code designations for flexible cords

Delete all the “country” notes in the reference document according to the following list:

0.2.1 Note 1 Note 3 4.1.15 Note
4.7.3 Note 1 and 2 5.2.2.2 Note 5.4.2.3.2.2 Note c
Table 13
5.4.2.3.2.4 Note 1 and 3 5.4.2.5 Note 2 5.4.5.1 Note
5.5.2.1 Note 5.5.6 Note 5.6.4.2.1 Note 2 and 3
5.7.5 Note 5.7.6.1 Note 1 and 2 10.2.1 Note 2, 3 and
Table 39 4
10.5.3 Note 2 10.6.2.1 Note 3 F.3.3.6 Note 3
For special national conditions, see Annex ZB.
1 Add the following note:

NOTE Z1 The use of certain substances in electrical and electronic equipment is restricted within the EU:

see Directive 2011/65/EU.
4.Z1 Add the following new subclause after 4.9:

To protect against excessive current, short-circuits and earth faults in circuits

connected to an a.c. mains, protective devices shall be included either as integral

parts of the equipment or as parts of the building installation, subject to the following,

a), b) and c):

a) except as detailed in b) and c), protective devices necessary to comply with the

requirements of B.3.1 and B.4 shall be included as parts of the equipment;
b) for components in series with the mains input to the equipment such as the

supply cord, appliance coupler, r.f.i. filter and switch, short-circuit and earth fault

protection may be provided by protective devices in the building installation;
c) it is permitted for pluggable equipment type B or permanently connected
equipment, to rely on dedicated overcurrent and short-circuit protection in the

building installation, provided that the means of protection, e.g. fuses or circuit

breakers, is fully specified in the installation instructions.
---------------------- Page: 5 ----------------------
SIST EN 62368-1:2014
EN 62368-1:2014 - 4 -

If reliance is placed on protection in the building installation, the installation

instructions shall so state, except that for pluggable equipment type A the building

installation shall be regarded as providing protection in accordance with the rating of

the wall socket outlet.
5.4.2.3.2.4 Add the following to the end of this subclause:

The requirement for interconnection with external circuit is in addition given in

EN 50491-3:2009.
c) d)
10.2.1 Add the following to and in Table 39:
For additional requirements, see 10.5.1.
10.5.1 Add the following after the first paragraph:
For RS 1 compliance is checked by measurement under the following conditions:

In addition to the normal operating conditions, all controls adjustable from the outside

by hand, by any object such as a tool or a coin, and those internal adjustments or pre-

sets which are not locked in a reliable manner, are adjusted so as to give maximum

radiation whilst maintaining an intelligible picture for 1 h, at the end of which the

measurement is made.
NOTE Z1 Soldered joints and paint lockings are examples of adequate locking.

The dose-rate is determined by means of a radiation monitor with an effective area of

10 cm², at any point 10 cm from the outer surface of the apparatus.

Moreover, the measurement shall be made under fault conditions causing an increase

of the high-voltage, provided an intelligible picture is maintained for 1 h, at the end of

which the measurement is made.

For RS1, the dose-rate shall not exceed 1 μSv/h taking account of the background

level.
NOTE Z2 These values appear in Directive 96/29/Euratom of 13May 1996.
10.6.2.1 Add the following paragraph to the end of the subclause:

EN 71-1:2011, 4.20 and the related tests methods and measurement distances apply.

10.Z1 Add the following new subclause after 10.6.5.
10.Z1 Non-ionizing radiation from radio frequencies in the range 0 to 300 GHz
The amount of non-ionizing radiation is regulated by European Council
Recommendation 1999/519/EC of 12 July 1999 on the limitation of exposure of the
general public to electromagnetic fields (0 Hz to 300 GHz).

For intentional radiators, ICNIRP guidelines should be taken into account for Limiting

Exposure to Time-Varying Electric, Magnetic, and Electromagnetic Fields (up to
300 GHz). For hand-held and body-mounted devices, attention is drawn to EN 50360
and EN 50566
G.7.1 Add the following note:

NOTE Z1 The harmonized code designations corresponding to the IEC cord types are given in Annex ZD.

Bibliography Add the following standards:
---------------------- Page: 6 ----------------------
SIST EN 62368-1:2014
- 5 - EN 62368-1:2014
Add the following notes for the standards indicated:
IEC 60130-9 NOTE Harmonized as EN 60130-9.
IEC 60269-2 NOTE Harmonized as HD 60269-2.
IEC 60309-1 NOTE Harmonized as EN 60309-1.
IEC 60364 NOTE some parts harmonized in HD 384/HD 60364 series.
IEC 60601-2-4 NOTE Harmonized as EN 60601-2-4.
IEC 60664-5 NOTE Harmonized as EN 60664-5.
IEC 61032:1997 NOTE Harmonized as EN 61032:1998 (not modified).
IEC 61508-1 NOTE Harmonized as EN 61508-1.
IEC 61558-2-1 NOTE Harmonized as EN 61558-2-1.
IEC 61558-2-4 NOTE Harmonized as EN 61558-2-4.
IEC 61558-2-6 NOTE Harmonized as EN 61558-2-6.
IEC 61643-1 NOTE Harmonized as EN 61643-1.
IEC 61643-21 NOTE Harmonized as EN 61643-21.
IEC 61643-311 NOTE Harmonized as EN 61643-311.
IEC 61643-321 NOTE Harmonized as EN 61643-321.
IEC 61643-331 NOTE Harmonized as EN 61643-331.
---------------------- Page: 7 ----------------------
SIST EN 62368-1:2014
EN 62368-1:2014 - 6 -
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
Publication Year Title EN/HD Year
Safety of Toys – Part 1: Mechanical and EN 71-1 -
physical properties
Sound system equipment: Headphones and EN 50332-1 -
earphones associated with personal music
players — Maximum sound pressure level
measurement methodology—
Part 1: General method for "one package
equipment"
Sound system equipment: Headphones and EN 50332-2 -
earphones associated with personal music
players — Maximum sound pressure level
measurement methodology—
Part 2: Matching of sets with headphones if
either or both are offered separately, or are
offered as one package equipment but with
standardised connectors between the two
allowing to combine components of different
manufacturers or different design
Product standard to demonstrate the EN 50360 -
compliance of mobile phones with the basic
restrictions related to human exposure to
electromagnetic fields (300 MHz - 3 GHz)
- - Insulating, sheathing and covering materials EN 50363 (all parts)
for low-voltage energy cables
- - Electrical test methods for low voltage energy EN 50395 2005
cables
- - Non electrical test methods for low voltage EN 50396 2005
energy cables
General requirements for Home and Building EN 50491-3 2009
Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) --
Part 3: Electrical safety requirements.
Product standard to demonstrate compliance EN 50566 -
of radio frequency fields from handheld and
body-mounted wireless communication
devices used by the general public (30 MHz -
6 GHz)
IEC 60027-1 - Letter symbols to be used in electrical EN 60027-1 -
technology –
Part 1: General
---------------------- Page: 8 ----------------------
SIST EN 62368-1:2014
- 7 - EN 62368-1:2014
Publication Year Title EN/HD Year
IEC 60065 - Audio, video and similar electronic apparatus EN 60065 -
– Safety requirements
IEC 60068-2-6 - Environmental testing EN 60068-2-6 -
Part 2-6: Tests – Test Fc: Vibration
(sinusoidal)
IEC 60068-2-78 - Environmental testing EN 60068-2-78 -
Part 2-78: Tests – Test Cab: Damp heat,
steady state
IEC/TR 60083 - Plugs and socket-outlets for domestic and - -
similar general use standardised in member
countries of IEC
IEC 60085 - Electrical insulation – Thermal classification EN 60085 -
and designation
IEC 60086-4 - Primary batteries – EN 60086-4 -
Part 4: Safety of lithium batteries
IEC 60107-1 1997 Methods of measurement on receivers for EN 60107-1 1997
television broadcast transmissions –
Part 1: General considerations -
Measurements at radio and video frequencies
IEC 60112 - Method for the determination of the proof and EN 60112 -
the comparative tracking indices of solid
insulating materials
IEC 60127 (all parts) Miniature fuses EN 60127 (all parts)
IEC 60227-1 - Polyvinyl chloride insulated cables of rated HD 21 -
voltages up to and including 450/750V –
Part 1: General requirements
IEC 60227-2 2003 Polyvinyl chloride insulated cables of rated HD 21 -
voltages up to and including 450/750V –
Part 2: Test methods
IEC 60245-1 - Rubber insulated cables – Rated voltages up HD 22 -
to and including 450/750V –
Part 1: General requirements

IEC 60309 (all parts) Plugs, socket-outlets and couplers for EN 60309 (all parts)

industrial purposes

IEC 60317 (all parts) Specifications for particular types of winding EN 60317 (all parts)

wires
IEC 60317-43 - Part 43: Aromatic polyimide tape wrapped EN 60317-43 -
round copper wire, class 240

IEC 60320 (all parts) Appliance couplers for household and similar EN 60320 (all parts)

general purposes
———————

The HD 21 series is related to, but not directly equivalent with the IEC 60227 series. Also EN 50363, EN 50395 and

EN 50396 are to be taken into account.

The HD 22 series is related to, but not directly equivalent with the IEC 60245 series. Also EN 50363, EN 50395 and

EN 50396 are to be taken into account.
---------------------- Page: 9 ----------------------
SIST EN 62368-1:2014
EN 62368-1:2014 - 8 -
Publication Year Title EN/HD Year
IEC 60320-1 - Appliance couplers for household and similar EN 60320-1 -
general purposes –
Part 1: General requirements
IEC 60320-2-2 - Appliance couplers for household and similar EN60320-2-2 -
general purposes –
Part 2-2: Interconnection couplers for
household and similar equipment
IEC 60332-1-2 - Tests on electric and optical fibre cables under EN 60332-1-2 -
fire conditions –
Part 1-2: Test for vertical flame propagation
for a single insulated wire or cable - Procedure
for 1 kW pre-mixed flame
IEC 60332-1-3 - Tests on electric and optical fibre cables under EN 60332-1-3 -
fire conditions –
Part 1-3: Test for vertical flame propagation
for a single insulated wire or cable - Procedure
for determination of flaming droplets/particles
IEC 60332-2-2 - Tests on electric and optical fibre cables under EN 60332-2-2 -
fire conditions –
Part 2-2: Test for vertical flame propagation
for a single small insulated wire or cable -
Procedure for diffusion flame
IEC 60384-14 2005 Fixed capacitors for use in electronic EN 60384-14 2005
equipment –
Part 14: Sectional specification: Fixed
capacitors for electromagnetic interference
suppression and connection to the supply
mains
IEC 60417 Data- Graphical symbols for use on equipment - -
base
IEC 60529 - Degrees of protection provided by enclosures EN 60529 -
(IP Code)
IEC 60664-1 2007 Insulation coordination for equipment within EN 60664-1 2007
low-voltage systems –
Part 1: Principles, requirements and tests
IEC 60664-3 - Insulation coordination for equipment within EN 60664-3 -
low-voltage systems –
Part 3: Use of coating, potting or moulding for
protection against pollution
IEC 60691 2002 Thermal-links - Requirements and application EN 60691 2003
guide
IEC 60695-10-2 - Fire hazard testing – EN 60695-10-2 -
Part 10-2: Abnormal heat – Ball pressure test
IEC 60695-10-3 - Fire hazard testing – EN 60695-10-3 -
Part 10-3: Abnormal heat – Mould stress relief
distortion test
IEC 60695-11-5 2004 Fire hazard testing – EN 60695-11-5 2005
Part 11-5: Test flames – Needle flame test
methods – Apparatus, confirmatory test
arrangement and guidance
---------------------- Page: 10 ----------------------
SIST EN 62368-1:2014
- 9 - EN 62368-1:2014
Publication Year Title EN/HD Year
IEC 60695-11-10 - Fire hazard testing – EN 60695-11-10- -
Part 11-10: Test flames – 50 W horizontal and
vertical flame test methods
IEC 60695-11-20 1999 Fire hazard testing – EN 60695-11-20 1999
Part 11-20: Test flames – 500 W flame test
methods
IEC/TS - Fire hazard testing – - -
60695-11-21 Part 11-21: Test flames – 500 W vertical flame
test methods for tubular polymeric materials
IEC 60728-11 2005 Cable networks for television signals, sound EN 60728-11 2005
(mod) signals and interactive services –
Part 11: Safety

IEC 60730 (all parts) Automatic electrical controls for household EN 60730 (all parts)

and similar use

IEC 60730-1 (mod) 2010 Automatic electrical controls for household EN 60730-1 2011

and similar use –
Part 1: General requirements
IEC 60738-1 2006 Thermistors – Directly heated positive EN 60738-1 2006
+A1 2009 temperature coefficient – +A1 2009
Part 1: Generic specification
IEC 60747-5-5 2007 Semiconductor devices – Discrete devices EN 60747-5-5 2011
Part 5-5: Optoelectronic devices –
Photocouplers
IEC 60825-1 2007 Safety of laser products – EN 60825-1 2007
Part 1: Equipment classification and
requirements
IEC 60825-2 2004 Safety of laser products – EN 60825-2 2004
Part 2: Safety of optical fibre communication
systems (OFCS)
IEC 60825-12 - Safety of laser products – EN 60825-12 -
Part 12: Safety of free space optical
communication systems used for transmission
of information
IEC 60851-3 2009 Winding wires – Test methods – EN 60851-3 2009
Part 3: Mechanical properties
IEC 60851-5 2008 Winding wires – Test methods – EN 60851-5 2008
Part 5: Electrical properties
IEC 60851-6 1996 Winding wires – Test methods – EN 60851-6 1996
Part 6: Thermal properties
IEC 60896-11 - Stationary lead-acid batteries – EN 60896-11 -
Part 11: Vented types – General requirements
and methods of tests
IEC 60896-21 2004 Stationary lead-acid batteries – EN 60896-21 2004
Part 21: Valve regulated types –Methods of
test
IEC 60896-22 - Stationary lead-acid batteries – EN 60896-22 -
Part 22: Valve regulated types –
Requirements
---------------------- Page: 11 ----------------------
SIST EN 62368-1:2014
EN 62368-1:2014 - 10 -
Publication Year Title EN/HD Year
IEC 60906-1 - IEC System of plugs and socket-outlet for - -
household and similar purposes –
Part 1: Plugs and socket-outlets 16 A 250 V
a.c.
IEC 60906-2 - IEC System of plugs and socket-outlet for - -
household and similar purposes –
Part 2: Plugs and socket-outlets 15 A 125 V
a.c.
IEC 60947-1 - Low-voltage switchgear and controlgear – EN 60947-1 -
Part 1: General rules

IEC 60950-1 (mod) 2005 Information technology equipment – Safety – EN 60950-1 2006

Part 1: General requirements
IEC 60950-22 2005 Information technology equipment – Safety – EN 60950-22 2006
Part 22: Equipment to be installed outdoors
IEC 60950-23 - Information technology equipment – Safety – EN 60950-23 -
Part 23: Large data storage equipment
IEC 60990 1999 Methods of measurement of touch current and EN 60990 1999
protective conductor current
IEC 60998-1 - Connecting devices for low-voltage circuits for EN 60998-1 -
household and similar purposes –
Part 1: General requirements
IEC 60999-1 - Connecting devices – Electrical copper EN 60999-1 -
conductors – Safety requirements for screw-
type and screwless-type clamping units –
Part 1: General requirements and particular
requirements for clamping units for conductors
2 2
from 0,2 mm up to 35 mm (included)
IEC 60999-2 - Connecting devices – Electrical copper EN 60999-2 -
conductors 470 – Safety requirements for
screw-type and screwless-type clamping units
Part 2: Particular requirements for clamping
units for conductors above 35 mm up to
300 mm (included)
IEC 61051-1 Varistors for use in electronic equipment –
Part 1: Generic specification
IEC 61051-2 1991 Varistors for use in electronic equipment – - -
A1 2009 Part 2: Sectional specification for surge
suppression varistors
IEC 61056-1 - General purpose lead-acid batteries (valve- EN 61056-1 -
regulated types) –
Part 1: General requirements, functional
characteristics - Methods of test
IEC 61056-2 - General purpose lead-acid batteries (valve- EN 61056-2 -
regulated types) –
Part 2: Dimensions, terminals and marking
IEC 61058-1 (mod) 2000 Switches for appliances EN 61058-1 2002
+A1 2001 Part 1: General requirements
+A2 2007 +A2 2008
---------------------- Page: 12 ----------------------
SIST EN 62368-1:2014
- 11 - EN 62368-1:2014
Publication Year Title EN/HD Year
IEC 61140 2001 Protection against electric shock – Common EN 61140 2002
aspects for installation and equipment
IEC/TS 61201 2007 Use of conventional touch voltage limits – - -
Application guide
IEC 61204-7 - Low-voltage power supplies, d.c. output – EN 61204-7 -
Part 7: Safety requirements
IEC 61293 - Marking of electrical equipment with ratings EN 61293 -
related to electrical supply – Safety
requirements
IEC 61427 - Secondary cells and batteries for Photovoltaic EN 61427 -
energy systems (PVES) – General
requirements and methods of test
IEC/TS 61430 - Secondary cells and batteries – Test methods - -
for checking the performance of devices
designed for reducing explosion hazards –
Lead-acid starter batteries
IEC 61434 - Secondary cells and batteries containing EN 61434 -
alkaline or other non-acid electrolytes – Guide
to designation of current in alkaline secondary
cell and battery standards
IEC 61558-1 2005 Safety of power transformers, power supplies, EN 61558-1 2005
reactors and similar products –
Part 1: General requirements and tests
IEC 61558-2-16 - Safety of power transformers, reactors, power EN 61558-2-16 -
supply units and similar products for voltages
up to 1 100 V –
Part 2-16: Particular requirements and tests
for switch mode power supply units and
transformers for switch mode power supply
units
IEC 61643-11 - Low-voltage surge protective devices – - -
Part 11: Surge protective devices connected
to low-voltage power systems – Requirements
and test methods
IEC 61810-1 2008 Electromechanical elementary relays – EN 61810-1 2008
Part 1: General and safety requirements
IEC 61959 - Secondary cells and batteries containing EN 61959 -
alkaline or other non-acid electrolytes –
Mechanical tests for sealed portable
secondary cells and batteries
IEC 61965 2003 Mechanical safety of cathode ray tubes EN 61965 2003
EN 61984 -
IEC 61984 - Connectors – Safety requirements and tests
IEC 62133 - Secondary cells and batteries containing EN 62133 -
alkaline or other non-acid electrolytes – Safety
requirements for portable sealed secondary
cells, and for batteries made from them, for
use in portable applications
IEC 62281 - Safety of primary and secondary lithium cells - -
and batteries during transport
---------------------- Page: 13 ----------------------
SIST EN 62368-1:2014
EN 62368-1:2014 - 12 -
Publication Year Title EN/HD Year
IEC 62471 (mod) 2006 Photobiological safety of lamps and lamp EN 62471 2008
systems
IEC/TR 62471-2 - Photobiological safety of lamps and lamp - -
systems –
Part 2: Guidance on manufacturing
requirements relating to non-laser optical
radiation safety
IEC 62485-2 - Safety requirements for secondary batteries - -
and battery installations –
Part 2: Stationary batteries
ISO 178 - Plastics - Determination of flexural properties EN ISO 178 -
ISO 179-1 - Plastics - Determination of Charpy impact EN ISO 179 -
properties –
Part 1: Non-instrumented impact test
ISO 180 - Plastics - Determination of Izod impact EN ISO 180 -
strength
ISO 306 - Plastics – Thermoplastic materials – EN ISO 306 -
Determination of Vicat softening temperatures
(VST)

ISO 527 (all parts) Plastics – Determination of tensile properties EN ISO 527 (all parts)

ISO 871 - Plastics – Determination of ignition - -
temperature using a hot-air furnace
ISO 3864 (all parts) Graphical symbols -- Safety colours and - -
safety signs
ISO 3864-2 - Graphical symbols – Safety colours and safety - -
signs –
Part 2: Design principles for product safety
labels
ISO 4892-1 - Plastics – Methods of exposure to laboratory EN ISO 4892-1 -
light sources –
Part 1: General guidance
ISO 4892-2 2006 Plastics – Methods of exposure to laboratory EN ISO 4892-2 2006
light sources –
Part 2: Xenon-arc lamps
ISO 4892-4 - Plastics – Methods of exposure to laboratory - -
light sources –
Part 4: Open-flame carbon-arc lamps
ISO 7000 Data-base Graphical symbols for use on equipment – - -
Index and synopsis
ISO 7010 - Graphical symbols – Safety colours and safety EN ISO 7010 -
signs – Safety signs used in workplaces and
public areas
ISO 8256 - Plastics - Determination of tensile-impact EN ISO 8256 -
strength
ISO 9772 - Cellular plastics - Determination of horizontal - -
burning characteristics of small specimens
subjected to a small flame
---------------------- Page: 14 ----------------------
SIST EN 62368-1:2014
- 13 - EN 62368-1:2014
Publication Year Title EN/HD Year
ISO 9773 - Plastics - Determination of burning behaviour EN ISO 9773 -
of thin flexible vertical specimens in contact
with a small-flame ignition source
---------------------- Page: 15 ----------------------
SIST EN 62368-1:2014
EN 62368-1:2014 - 14 -
Annex ZB
(normative)
Special National Conditions

Special national condition: National characteristic or practice that cannot be changed even over a

long period, e.g. climatic conditions, electrical earthing conditions.
NOTE If it affects harmonisation, it forms part of the European Standard.

For the countries in which the relevant special national apply these provisions are normative, for other

countries they are informative.
Clause Special national condition
4.1.15 Denmark, Finland, Norway and Sweden
To the end of the subclause the following is added:

Class I pluggable equipment type A intended for connection to other equipment or a

network shall, if safety relies on connection to reliable earthing or if surge suppressors

are connected between the network terminals and accessible parts, have a marking
stating that the equipment shall be connected to an earthed mains socket-outlet.
The marking text in the applicable countries shall be as follows:

In Denmark: “Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver

forbindelse til stikproppens jord.”
In Finland: "Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan"
In Norway: “Apparatet må tilkoples jordet stikkontakt”
In Sweden: “Apparaten skall anslutas till jordat uttag”
4.7.3 United Kingdom
To the end of the subclause the following is added:

The torque test is performed using a socket-outlet complying with BS 1363, and the

plug part shall be assessed to the relevant clauses of BS 1363. Also see Annex G.4.2

of this annex
5.2.2.2 Denmark
After the 2nd paragraph add the following:
A warning (marking safeguard) for high touch current is required if the touch
current exceeds the limits of 3,5 mA a.c. or 10 mA d.c.
5.4.11.1 Finland and Sweden
and
Annex G
---------------------- Page: 16 ----------------------
SIST EN 62368-1:2014
- 15 - EN 62368-1:2014
Clause Special national condition
To the end of the subclause the following is added:

For separation of the telecommunication network from earth the following is applicable:

If this insulation is solid, including insulation forming part of a component, it shall at least

consist of either

• two layers of thin sheet material, each of which shall pass the electric strength test

below, or

• one layer having a distance through insulation of at least 0,4 mm, which shall pass

the electric strength test below.

If this insulation forms part of a semiconductor component (e.g. an optocoupler), there is

no distance through insulation requirement for the insulation consisting of an insulating

compound completely filling the casing, so that clearances and creepage distances do

not exist, if the component passes the electric strength test in accordance with the

compliance clause below and in addition
• passes the tests and inspection criteria
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.