SIST EN ISO 2812-1:2007
(Main)Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2007)
Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2007)
ISO 2812-1:2007 specifies general methods for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids, other than water, or paste-like products (included implicitly in test liquids mentioned in the text).
These methods enable the testers to determine the effects of the test liquid on the coating and, if necessary, to assess the damage to the substrate.
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 1: Eintauchen in Flüssigkeiten außer Wasser (ISO 2812-1:2007)
Dieser Teil von ISO 2812 legt allgemeine Verfahren zum Bestimmen der Beständigkeit einer einzelnen Schicht oder eines Mehrschichtsystems aus Beschichtungsstoffen gegen die Einwirkung von Flüssigkeiten außer Wasser oder pastenförmigen Produkten (im weiteren Text in die Flüssigkeiten mit eingeschlossen) fest.
Diese Verfahren ermöglichen es, die Wirkung der Prüfsubstanz auf die Beschichtung und, falls notwendig, die Schädigung des Substrates zu beurteilen.
Peintures et vernis - Détermination de la résistance aux liquides - Partie 1: Immersion dans des liquides autres que l'eau (ISO 2812-1:2007)
L'ISO 2812-1:2007 spécifie des méthodes générales de détermination de la résistance d'un système de peinture monocouche ou multicouche à l'action de liquides autres que l'eau ou de produits pâteux (compris implicitement dans les liquides d'essai mentionnés dans le texte).
Ces méthodes permettent aux opérateurs d'évaluer l'effet du liquide d'essai sur le revêtement et, si nécessaire, d'évaluer la détérioration du subjectile.
Barve in laki - Določanje odpornosti proti tekočinam - 1. del: Potopitev v tekočine drugačnih od vode (ISO 2812-1:2007)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2007)Peintures et vernis - Détermination de la résistance aux liquides - Partie 1: Immersion dans des liquides autres que l'eau (ISO 2812-1:2007)Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 1: Eintauchen in Flüssigkeiten außer Wasser (ISO 2812-1:2007)Ta slovenski standard je istoveten z:EN ISO 2812-1:2007SIST EN ISO 2812-1:2007en;fr;de87.040Barve in lakiPaints and varnishesICS:SIST EN ISO 2812-1:19971DGRPHãþDSLOVENSKI
STANDARDSIST EN ISO 2812-1:200701-julij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 2812-1January 2007ICS 87.040Supersedes EN ISO 2812-1:1994
English VersionPaints and varnishes - Determination of resistance to liquids -Part 1: Immersion in liquids other than water (ISO 2812-1:2007)Peintures et vernis - Détermination de la résistance auxliquides - Partie 1: Immersion dans des liquides autres quel'eau (ISO 2812-1:2007)Beschichtungsstoffe - Bestimmung der Beständigkeitgegen Flüssigkeiten - Teil 1: Eintauchen in Flüssigkeitenaußer Wasser (ISO 2812-1:2007)This European Standard was approved by CEN on 23 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 2812-1:2007: E
Foreword
This document (EN ISO 2812-1:2007) has been prepared by Technical Committee ISO/TC 35 "Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and varnishes", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2007, and conflicting national standards shall be withdrawn at the latest by July 2007.
This document supersedes EN ISO 2812-1:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 2812-1:2007 has been approved by CEN as EN ISO 2812-1:2007 without any modifications.
Reference numberISO 2812-1:2007(E)© ISO 2007
INTERNATIONAL STANDARD ISO2812-1Second edition2007-01-15Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water Peintures et vernis — Détermination de la résistance aux liquides — Partie 1: Immersion dans des liquides autres que l'eau
ISO 2812-1:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 2812-1:2007(E) © ISO 2007 – All rights reserved iiiContents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Principle.1 4 Apparatus.2 5 Test liquids.2 6 Sampling.2 7 Test pieces.2 8 Procedure.3 9 Evaluation.4 10 Precision.4 11 Test report.5 Annex A (informative)
Examples of test liquids.6 Bibliography.7
ISO 2812-1:2007(E) iv © ISO 2007 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2812-1 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and varnishes. This second edition cancels and replaces the first edition (ISO 2812-1:1993), which has been technically revised. The main changes are: ⎯ the standard has been split into parts 1, 3 and 4 for immersion, absorbent medium and spotting methods; ⎯ the triplicate test was changed to duplicate; ⎯ the types of test liquids have been added in an annex. ISO 2812 consists of the following parts, under the general title Paints and varnishes — Determination of resistance to liquids: ⎯ Part 1: Immersion in liquids other than water ⎯ Part 2: Water immersion method ⎯ Part 3: Method using an absorbent medium ⎯ Part 4: Spotting methods ⎯ Part 5: Temperature-gradient oven method
INTERNATIONAL STANDARD ISO 2812-1:2007(E) © ISO 2007 – All rights reserved 1Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water 1 Scope This part of ISO 2812 specifies general methods for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids, other than water, or paste-like products (included implicitly in test liquids mentioned in the text). These methods enable the testers to determine the effects of the test liquid on the coating and, if necessary, to assess the damage to the substrate. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1513, Paints and varnishes — Examination and preparation of samples for testing ISO 1514, Paints and varnishes — Standard panels for testing ISO 2808, Paints and varnishes — Determination of film thickness ISO 3270, Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing ISO 3696, Water for analyti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.