Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners

This part of IEC 62561 deals with the requirements and tests for metallic and non-metallic
conductor fasteners that are used to retain and support the air-termination, down-conductor
and earth-termination systems.
This document does not cover the fixing of conductor fasteners to the fabric of structures due
to the vast number and types used in modern day construction.
LPSC can also be suitable for use in hazardous atmospheres. There are therefore additional
requirements when installing the components in such conditions.

Blitzschutzsystembauteile (LPSC) - Teil 4: Anforderungen an Leitungshalter

Composants de système de protection contre la foudre (CSPF) - Partie 4: Exigences pour les fixations de conducteur

L'IEC 62561-4:2017 spécifie les exigences et les essais pour les fixations métalliques et non métalliques de conducteurs utilisées pour maintenir et supporter les dispositifs de capture, les conducteurs de descente et les prises de terre.
Le présent document ne traite pas de la fixation de ces supports sur les structures d'édifice en raison du grand nombre de solutions modernes de construction.
Les CSPF peuvent aussi être employés dans des atmosphères dangereuses. Il existe donc des exigences supplémentaires pour installer les composants dans de telles conditions.
Cette deuxième édition annule et remplace la première édition publiée en 2010. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- nouveau logigramme détaillé des essais;
- dans les Annexes A et B, ajout des fixations en composite.

Elementi sistema za zaščito pred strelo (LPSC) - 4. del: Zahteve za pritrdilne elemente

Ta del standarda IEC 62561 obravnava zahteve in preskuse za kovinske ter nekovinske pritrditve vodnikov, ki se uporabljajo za vzdrževanje in podporo lovilnega, odvodnega ter ozemljitvenega sistema.
Ta dokument ne zajema pritrditve vodnikov na material zgradb zaradi velikega števila in vrst, ki se danes uporabljajo v gradbeništvu.
Elementi za zaščito pred strelo (LPSC) so lahko primerni tudi za uporabo v nevarnih ozračjih. Zaradi tega glede namestitve sestavnih delov v takih pogojih obstajajo dodatne zahteve.

General Information

Status
Published
Publication Date
28-Jan-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Jan-2018
Due Date
22-Mar-2018
Completion Date
29-Jan-2018

Relations

Buy Standard

Standard
EN 62561-4:2018
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62561-4:2018
01-marec-2018
1DGRPHãþD
SIST EN 62561-4:2011
(OHPHQWLVLVWHPD]D]DãþLWRSUHGVWUHOR /36& GHO=DKWHYH]DSULWUGLOQH
HOHPHQWH
Lightning protection system components (LPSC) - Part 4: Requirements for conductor
fasteners
Blitzschutzsystembauteile (LPSC) - Teil 4: Anforderungen an Leitungshalter
Composants de système de protection contre la foudre (CSPF) - Partie 4: Exigences
pour les fixations de conducteur
Ta slovenski standard je istoveten z: EN 62561-4:2017
ICS:
91.120.40 =DãþLWDSUHGVWUHOR Lightning protection
SIST EN 62561-4:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62561-4:2018

---------------------- Page: 2 ----------------------

SIST EN 62561-4:2018


EUROPEAN STANDARD EN 62561-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2017
ICS 29.020; 91.120.40 Supersedes EN 62561-4:2011
English Version
Lightning protection system components (LPSC) - Part 4:
Requirements for conductor fasteners
(IEC 62561-4:2017)
Composants de systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 4: Anforderungen
(CSPF) - Partie 4: Exigences pour les fixations de an Leitungshalter
conducteur (IEC 62561-4:2017)
(IEC 62561-4:2017)
This European Standard was approved by CENELEC on 2017-09-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62561-4:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62561-4:2018
EN 62561-4:2017
European foreword
The text of document 81/564/FDIS, future edition 2 of IEC 62561-4, prepared by IEC/TC 81, "Lightning
protection", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62561-4:2017.
The following dates are fixed:
– latest date by which this document has to be (dop) 2018-06-01
implemented at national level
by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2020-12-01
with this document have to be withdrawn

This document supersedes EN 62561-4:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62561-4:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62305 (series) NOTE Harmonized as EN 62305 (series).

2

---------------------- Page: 4 ----------------------

SIST EN 62561-4:2018
EN 62561-4:2017

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.