SIST EN 13823:2011+A1:2015

Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

This European Standard specifies a method of test for determining the reaction to fire performance of construction products excluding floorings, and excluding products which are indicated in Table 1 of EC Decision 2000/147/EC, when exposed to thermal attack by a single burning item (SBI). The calculation procedures are given in Annex A. Information on the precision of the test method is given in Annex B. The calibration procedures are given in Annexes C and D, of which C is a normative annex.
NOTE   This European Standard has been developed to determine the reaction to fire performance of essentially flat products. The treatment of some families of products, e.g. linear products (pipes, ducts, cables etc.), can need special rules.

Prüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von Bodenbelägen

Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung des Brandverhaltens von Bauprodukten bei thermischer Beanspruchung durch einen einzelnen brennenden Gegenstand (SBI: „Single Burning Item“), ausgenommen Bodenbeläge sowie Bauprodukte, die in Tabelle 1 der Entscheidung der Europäischen Kommission 2000/147/EG aufgeführt sind, fest. Die Berechnungsverfahren sind in Anhang A angegeben. Informationen zur Genauigkeit des Prüfverfahrens sind in Anhang B angegeben. Die Kalibrier¬verfahren sind in Anhang C und Anhang D angegeben, wobei Anhang C normativ ist.
ANMERKUNG   Diese Europäische Norm wurde erstellt, um das Brandverhalten von im Wesentlichen ebenen Bauprodukten zu bestimmen. Die Behandlung von einigen Produktfamilien, wie Rohre, Lüftungsleitungen, Kabel usw. kann besondere Regeln erfordern.

Essais de réaction au feu des produits de construction - Produits de construction à l'exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par un objet isolé en feu

La présente Norme européenne définit une méthode d’essai de détermination de la performance de réaction au feu des produits de construction, à l’exception des revêtements de sol et des produits figurant dans le Tableau 1 de la Décision CE 2000/147/CE, exposés à la sollicitation thermique provoquée par un « Single Burning Item » (SBI) (Objet Isolé en Feu) (OIF). Les méthodes de calcul sont fournies dans l’Annexe A. Des informations relatives à la précision de la méthode d’essai sont données dans l’Annexe B. Les méthodes d’étalonnage figurent dans les Annexes C et D, C étant une annexe normative.
NOTE   La présente Norme européenne a été élaborée pour déterminer la performance de réaction au feu de produits essentiellement plats. Le traitement de quelques familles de produits linéaires (tubes, conduits, câbles, etc.) peut nécessiter des règles particulières.

Preskusi odziva gradbenih proizvodov na ogenj - Gradbeni proizvodi razen talnih oblog, izpostavljeni toplotnemu delovanju enega samega gorečega predmeta

Ta evropski standard določa preskusno metodo za ugotavljanje odziva gradbenih proizvodov na ogenj, razen talnih oblog in izdelkov, ki so navedeni v tabeli 1 Odločbe ES 2000/147/ES, kadar so izpostavljeni toplotnemu delovanju enega samega gorečega predmeta (SBI). Računski postopki so navedeni v dodatku A. Informacije o natančnosti preskusne metode so navedene v prilogi B. Kalibracijski postopki so navedeni v prilogah C in D, od katerih je C normativna priloga.
OPOMBA Ta evropski standard je bil razvit za določanje odziva na ogenj za izdelke, ki so v večji meri ploščati. Za obdelavo nekaterih družin izdelkov, npr. linearnih izdelkov (cevi, kanalov, kablov itd.) so morda potrebna posebna pravila.

General Information

• Status: Withdrawn
• Publication Date: 19-Jan-2015
• Withdrawal Date: 18-Jun-2020
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• ICS: 91.060.01 - Elements of buildings in general
• ICS: 91.100.01 - Construction materials in general
• Technical Committee: POZ - Požarna varnost
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 19-Jun-2020
• Due Date: 12-Jul-2020
• Completion Date: 19-Jun-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/117 - Horizontal complement to the mandates to CEN/CENELEC concerning the execution of standardization work for the valuation of construction products and elements in respect of their resistance to fire
• Ref Project: EN 13823:2010+A1:2014 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

Relations

• Consolidates: SIST EN 13823:2011 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 01-Feb-2015
• Consolidates: SIST EN 13823:2011/kFprA1:2014 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 01-Feb-2015
• Replaced By: SIST EN 13823:2020 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 01-Jul-2020
• Replaced By: SIST EN 13823:2020 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 08-Jun-2022
• Consolidates: SIST EN 13823:2011/kFprA1:2014 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 18-Jan-2023
• Consolidates: SIST EN 13823:2011 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 18-Jan-2023
• Consolidates: SIST EN 13823:2011/kFprA1:2014 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 19-Jan-2023
• Consolidates: SIST EN 13823:2011 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UHGPHWDPrüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von BodenbelägenEssais de réaction au feu des produits de construction - Produits de construction à l'exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par un objet isolé en feuReaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item91.100.01Gradbeni materiali na splošnoConstruction materials in general91.060.01Stavbni elementi na splošnoElements of buildings in general13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 13823:2010+A1:2014SIST EN 13823:2011+A1:2015en,fr,de01-februar-2015SIST EN 13823:2011+A1:2015SLOVENSKI
STANDARD



SIST EN 13823:2011+A1:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13823:2010+A1
November 2014 ICS 91.060.01; 13.220.50; 91.100.01 Supersedes EN 13823:2010English Version
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Essais de réaction au feu des produits de construction - Produits de construction à l'exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par un objet isolé en feu
Prüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von Bodenbelägen This European Standard was approved by CEN on 25 June 2010 and includes Amendment 1 approved by CEN on 9 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13823:2010+A1:2014 ESIST EN 13823:2011+A1:2015



EN 13823:2010+A1:2014 (E) 2 Contents Page Foreword . 4 Introduction . 5 1 Scope. 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test facility . 7 4.1 General . 7 4.2 Test room . 7 4.3 Materials . 10 4.4 Test apparatus . 10 4.5 Smoke exhaust system . 12 4.6 General measurement section equipment . 12 4.7 Other general equipment. 13 5 Test specimen . 14 5.1 Dimensions of specimen . 14 5.2 Mounting of specimen . 14 5.2.1 Mounting as in end use application . 14 5.2.2 Standard mounting . 15 5.3 Installation of the specimen wings in the trolley . 17 5.4 Number of specimens. 17 6 Conditioning . 17 7 Principle . 18 8 Test procedure . 18 8.1 General . 18 8.2 Testing operations . 18 8.3 Visual observation and manual recording of data . 19 8.3.1 General . 19 8.3.2 Pre-test conditions . 19 8.3.3 Lateral flame spread on the long wing . 19 8.3.4 Flaming particles or droplets . 20 8.3.5 End of test conditions . 21 8.3.6 Recorded events . 21 8.4 Automated recording of data . 22 8.5 Early termination of test . 22 9 Expression of results. 23 10 Test report . 23 Annex A (normative)
Calculation procedures . 25 A.1 General . 25 A.1.1 General remarks . 25 A.1.2 Calculations to be performed on the test data . 26 A.1.3 Calculations to be performed on calibration data . 26 A.1.4 Standard data set . 26 A.2 Synchronization of data . 26 SIST EN 13823:2011+A1:2015



EN 13823:2010+A1:2014 (E) 3 A.3 Checking equipment response . 28 A.3.1 Temperature readings . 28 A.3.2 Drift in gas concentration measurement . 28 A.3.3 Drift in light attenuation measurement . 28 A.4 Exposure period . 29 A.5 Heat output . 29 A.5.1 Calculation of heat release rate (HRR). 29 A.5.2 Calculation of THR(t) and THR600s . 32 A.5.3 Calculation of FIGRA0,2MJ and FIGRA0,4MJ (fire growth rate indices) . 32 A.6 Smoke production . 33 A.6.1 Calculation of smoke production rate (SPR) . 33 A.6.2 Calculation of TSP(t) and TSP600s .
...