iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13261:2009/kFprA1:2010

(Amendment)

Railway applications - Wheelsets and bogies - Axles - Product requirements

Railway applications - Wheelsets and bogies - Axles - Product requirements

This European Standard specifies the characteristics of axles for use on European networks.
It defines characteristics of forged or rolled solid and hollow axles, made from vacuum-degassed steel grade
EA1N1 that is the most commonly used grade on European networks. For hollow axles, this standard applies
only to those that are manufactured by machining of a hole in a forged or rolled solid axle
In addition, the particular characteristics for axles in grade EA1T1 and EA4T1 are given in Annex A.
Two categories of axle are defined, category 1 and category 2. Generally, category 1 is chosen when the
operational speed is higher than 200 km/h.
This standard is applicable to axles that are designed in accordance with the requirements of EN 13103 and
EN 13104.
NOTE Different values for some characteristics may be agreed if a particular process of fabrication (e.g. cold rolling,
shot peening) has an influence on them.

Bahnanwendungen - Radsätze und Drehgestelle - Radsatzwellen - Produktanforderungen

Applications ferroviaires - Essieux montés et bogies - Essieux-axes - Prescriptions pour le produit

Železniške naprave - Kolesne dvojice in podstavni vozički - Osi - Zahtevane lastnosti proizvoda - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
19-Aug-2010
ICS
45.040 - Materials and components for railway engineering
Technical Committee
IŽNP - Reilway applications
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
28-Jan-2014
Due Date
02-Feb-2014
Completion Date
28-Jan-2014
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
Ref Project
EN 13261:2009/FprA1 - Railway applications - Wheelsets and bogies - Axles - Product requirements

Relations

Revised
SIST EN 13261:2009 - Railway applications - Wheelsets and bogies - Axles - Product requirements
Effective Date
19-Dec-2009
Consolidated By
SIST EN 13261:2009+A1:2010 - Railway applications - Wheelsets and bogies - Axles - Product requirements
Effective Date
18-Jan-2023
Consolidated By
SIST EN 13261:2009+A1:2010 - Railway applications - Wheelsets and bogies - Axles - Product requirements
Effective Date
19-Jan-2023
Consolidated By
SIST EN 13261:2009+A1:2010 - Railway applications - Wheelsets and bogies - Axles - Product requirements
Effective Date
01-Dec-2010

Buy Standard

EN 13261:2009/kFprA1:2010EN 13261:2009/kFprA1:2010
PreviousNext
Draft
EN 13261:2009/kFprA1:2010
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13261:2009/kFprA1:2010
01-julij-2010
äHOH]QLãNHQDSUDYH.ROHVQHGYRMLFHLQSRGVWDYQLYR]LþNL2VL=DKWHYDQH
ODVWQRVWLSURL]YRGD'RSROQLOR$
Railway applications - Wheelsets and bogies - Axles - Product requirements
Bahnanwendungen - Radsätze und Drehgestelle - Radsatzwellen -
Produktanforderungen
Applications ferroviaires - Essieux montés et bogies - Essieux-axes - Prescriptions pour
le produit
Ta slovenski standard je istoveten z: EN 13261:2009/FprA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 13261:2009/kFprA1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13261:2009/kFprA1:2010

---------------------- Page: 2 ----------------------

SIST EN 13261:2009/kFprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 13261:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2010
ICS 45.040
English Version
Railway applications - Wheelsets and bogies - Axles - Product
requirements
Applications ferroviaires - Essieux montés et bogies - Bahnanwendungen - Radsätze und Drehgestelle -
Essieux-axes - Prescriptions pour le produit Radsatzwellen - Produktanforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 13261:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13261:2009/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13261:2009/kFprA1:2010
EN 13261:2009/prA1:2010 (E)
Contents Page
Foreword.3
1 Amendment of the Foreword.4
2 Amendment of Annex ZA.4
3 Deletion of Annex ZB .6

2

---------------------- Page: 4 ----------------------

SIST EN 13261:2009/kFprA1:2010
EN 13261:2009/prA1:2010 (E)
Foreword
This document (EN 13261:2009/prA1:2010) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
3

---------------------- Page: 5 ----------------------

SIST EN 13261:2009/kFprA1:2010
EN 13261:2009/prA1:2010 (E)
1 Amendment of the Foreword
th
Delete the 5 paragraph of the Foreword and replace with:
"This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission and the European Free Trade Association, and supports essential requirements of EU Directive
2008/57/EC."
th
Delete the 6 paragraph and replace with:
"For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this
document."

2 Amendment of Annex ZA
Replace Annex ZA with the following Annex ZA:
"
Annex ZA
(informative)

Relationship between this European Standard and the Essential Requirements of
EU Directive 2008/57/EC
This European Standard has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commissio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15355:2019+A1:2023(Main + Amendment)
Railway applications - Braking - Distributor valves and distributor-isolating devices
EN 15355:2019+A1:2023

This document applies to distributor valves and distributor-isolating devices.
The distributor valves contained in this document are of graduable release type. Direct release types are not included.
Functionally they are regarded as not containing relay valves of any type, even if the relay valves are physically an integral part of the distributor valves.
This document applies to both distributor-isolating devices mounted separate from the distributor valve and distributor-isolating devices integral with the distributor valve.
This document specifies the requirements for the design, testing and quality assurance of distributor valves and distributor-isolating devices.
The distributor valve and distributor-isolating device are intended to be part of a brake system mounted in a vehicle with maximum length of 31 m and maximum brake pipe volume of 25 l taking into consideration brake pipe inner diameters between 25 mm and 32 mm.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15437-1:2009+A1:2023(Main)
Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
EN 15437-1:2009+A1:2022

This part of EN 15437 defines the minimum characteristics for the interface between a trackside Hot Axlebox Detector (HABD) and Rolling Stock (RST) that comply with the European Directives for Interoperability to ensure that the minimum functional requirement of the interface is achieved.
The minimum requirements of the interface apply to:
a)   Rolling stock conforming to standard European railway gauge, that is 1 435 mm;
b)   Rolling stock axles fitted with outboard bearings;
NOTE 1   The design of rolling stock axles fitted with inboard bearings should respect the requirements set out in Note 2 of 5.2.
c)   Rolling stock with a maximum design speed lower than 250 km/h;
NOTE 2   Interoperable rolling stock with a maximum design speed higher than or equal to 250 km/h are mandated to have on-board equipment for axlebox condition monitoring. The requirements for on-board equipment are described in !EN 15437-2:2012+A1:2022.
NOTE 3   Interoperable rolling stock with a maximum design speed higher than or equal to 250 km/h are outside the scope of this Part of the standard. However, if such rolling stock are required to be monitored by HABDs their target area should comply with the requirements specified in this standard, except where stated otherwise.
d)   Trackside HABDs that are required to monitor rolling stock with a maximum design speed higher than or equal to 250 km/h.
The rolling stock requirements of the interface are described in Clause 5 and for the HABD requirements of the interface are described in Clause 6.
The scope of this part (part 1) of the standard does not include:
-   Hot Wheel (Hot Disc) Detectors (HWDs). However, HWD are often installed in combination with trackside HABD to provide a dual monitoring system. This standard does not prevent the use of such a combination;
-   how a HABD measures the temperature and identifies axle box position. This is part of an individual equipment design and not part of the functional requirements of this standard;
-   operational requirements for acting on the information reported by the HABD system;
-   maintenance requirements for HABD systems.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13103-1:2018+A1:2023(Main)
Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals
EN 13103-1:2017+A1:2022

This European Standard:
— defines the forces and moments to be taken into account with reference to masses, traction and braking conditions;
— gives the stress calculation method for axles with outside axle journals;
— specifies the maximum permissible stresses to be assumed in calculations for steel grade EA1N, EA1T and EA4T defined in EN 13261;
— describes the method for determination of the maximum permissible stresses for other steel grades;
— determines the diameters for the various sections of the axle and recommends the preferred shapes and transitions to ensure adequate service performance.
This European Standard is applicable for:
— axles defined in EN 13261
— powered and non-powered axles and
— all track gauges3.
The powered axle design method of this European Standard applies to:
— solid and hollow powered axles for railway rolling stock;
— solid and hollow non-powered axles of motor bogies;
— solid and hollow non-powered axles of locomotives.
The non-powered axle design method of this standard applies to solid and hollow axles of railway rolling stock used for the transportation of passengers and freight that are not considered in the list above.
This European Standard is applicable to axles fitted to rolling stock intended to run under normal European conditions. Before using this European Standard, if there is any doubt as to whether the railway operating conditions are normal, it is necessary to determine whether an additional design factor has to be applied to the maximum permissible stresses. The calculation of wheelset axles for special applications (e.g. tamping/lining/levelling machines) may be made according to this European Standard only for the load cases of free-rolling and rolling in train formation. This European Standard does not apply to the loads induced by the vehicles in their working mode. They are calculated separately.
This method can be used for light rail and tramway applications.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15611:2020+A1:2023(Main)
Railway applications - Braking - Relay valves
EN 15611:2020+A1:2022

This document is applicable to relay valves designated to control the brake cylinder pressure of compressed air brakes fitted to railway vehicles, in association with an air brake distributor valve or other control device. It covers one stage relay valves and relay valves adjusting the brake cylinder pressure in response to a change in vehicle speed or load that is either continuously variable or in two or more stages, i.e. empty – loaded.
Relay valves operating with other pressures, in particular the brake pipe pressure, are not included.
This document specifies the requirements for the design, manufacture and testing of relay valves.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12080:2017+A1:2022(Main)
Railway applications - Axleboxes - Rolling bearings
EN 12080:2017+A1:2022

This European Standard specifies the quality parameters of axlebox rolling bearings supporting the load of the vehicle, required for reliable operation of trains on European networks. It covers metallurgical and material properties as well as geometric and dimensional characteristics. It also defines methods for quality assurance and conditions for approval of the products.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16839:2022(Main)
Railway applications - Rolling stock - Head stock layout
EN 16839:2022

This European Standard is valid for vehicles equipped with buffers and screw coupling systems.
In order to allow operation and coupling of trainsets or vehicles, this European Standard specifies the defined free space for the shunter called the "Berne rectangle" and the necessary free space for the installation of the rescue coupler.
This European Standard specifies the location, fixing and free spaces on the headstock of:
-   buffers;
-   screw coupling systems;
-   end cocks;
-   pneumatic half couplings;
-   connections for electric cables.
It also specifies the calculation of the width of the buffer heads.
Unless otherwise displayed, all dimensions given in this European Standard are nominal values.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15427-2-1:2022(Main)
Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants
EN 15427-2-1:2022

This European Standard specifies the requirements of lubricants intended for lubrication of the active interface (wheel flange and the gauge face of the rail/ back of wheel and check rail).
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the lubricant.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15427-1-1:2022(Main)
Railway applications - Wheel/Rail friction management - Part 1-1: Equipment and Application - Flange Lubricants
EN 15427-1-1:2022

This European standard specifies the requirements when applying lubricant to the interface between the wheel flange and the rail (active interface) either directly or indirectly to the wheel flange or to the rail and includes both trainborne and trackside solutions.
This standard only covers the equipment and application of lubricant to the active interface.
This document defines:
- the characteristics that systems of lubrication of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;
- all relevant terminology which is specific to the lubrication of the wheel-rail interface.
This document only applies to the mainline railway
NOTE   This document can also be used for other railways, e. g urban rail.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15734-2:2011+A1:2022(Main)
Railway applications - Braking systems of high speed trains - Part 2: Test methods
EN 15734-2:2010+A1:2021

This European Standard specifies test methods and acceptance criteria for a brake system for use in high speed trains as described in the TSI Rolling Stock, operating on routes of the trans-European high-speed rail system.
The tests defined in this document have the purpose of verifying that the braking performance and functions of the train's brake system comply at least with the respective requirements of EN 15734-1.
This European Standard is applicable to:
-   new vehicles of high speed trains;
-   new constructions of existing vehicle types;
-   major overhauls of the above-mentioned vehicles if they involve redesigning or extensive alteration to the brake system of the vehicle concerned.
The functional testing requirements set out in this document assume the vehicles are fitted with a brake system architecture that follows the UIC air brake pipe control principles.
High Speed Rolling Stock can be fitted with alternative brake system architectures that do not employ brake pipe control. In these cases equivalent testing requirements will need to be generated to test the functional performance of brake system fitted.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15734-1:2011+A1:2022(Main)
Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions
EN 15734-1:2010+A1:2021

This European Standard describes the functionality, constraints, performance and operation of a brake system for use in high speed trains as described in the TSI High Speed Rolling Stock, operating on routes of the European railways and their infrastructure systems.
The brake system requirements specified in this European Standard apply to trains that may operate at a maximum speed of up to 350 km/h on lines specifically built for high speed and define graduated values for deceleration related to four speed ranges (see Clause 6).
This European Standard covers:
-   all new vehicle designs of high speed trains;
-   all major overhauls of the above-mentioned vehicles if they involve redesigning or extensive alteration to the brake system of the vehicle concerned.
This European Standard does not cover locomotive hauled trains, which are specified by EN 14198.
NOTE   This document applies the functional subdivision into subsystems as specified in the TSI High speed. The braking system is part of the function: "Accelerate, maintain speed, brake and stop".

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day