SIST EN ISO 3677:2016
(Main)Filler metal for soldering and brazing - Designation (ISO 3677:2016)
Filler metal for soldering and brazing - Designation (ISO 3677:2016)
This International Standard specifies designations for filler materials for soldering and brazing, on
the basis of their chemical composition. For brazing materials only, the designation includes their
solidus/liquidus temperatures. This International Standard deals with the metallic part of filler
materials used in soldering and brazing products, e.g. foils, wires, rods, pastes, flux coated rods/wires,
flux cored rods/wires, etc.
Zusätze zum Weich- und Hartlöten - Bezeichnung (ISO 3677:2016)
Métaux d'apport de brasage tendre et de brasage fort - Désignation (ISO 3677:2016)
ISO 3677:2016 spécifie les désignations pour les métaux d'apport de brasage tendre et de brasage fort d'après leur composition chimique. Pour les produits de brasage fort uniquement, la désignation inclut leurs températures de solidus/liquidus. La présente Norme internationale traite de la partie métallique des métaux d'apport utilisés pour les produits de brasage tendre et de brasage fort, par exemple feuillards, fils, baguettes, pâtes, fils/baguettes enrobés de flux, fils/baguettes fourrés de flux, etc.
Dodajni materiali za mehko in trdo spajkanje - Označevanje (ISO 3677:2016)
Ta mednarodni standard določa označevanje dodajnih materialov za mehko in trdo spajkanje na podlagi njihove kemijske sestave. Samo pri materialih za trdo spajkanje označevanje vključuje temperature, pri katerih prehajajo iz trdnega v tekoče stanje. Ta mednarodni standard obravnava kovinski del dodajnih materialov, ki se uporabljajo pri mehkem in trdem spajkanju proizvodov, npr. folije, žice, palice, paste, palice/žice, prevlečene s talilom, palice/žice, izpolnjene s talilom itd.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2016
1DGRPHãþD
SIST EN ISO 3677:1997
'RGDMQLPDWHULDOL]DPHKNRLQWUGRVSDMNDQMH2]QDþHYDQMH ,62
Filler metal for soldering and brazing - Designation (ISO 3677:2016)
Zusätze zum Weich- und Hartlöten - Bezeichnung (ISO 3677:2016)
Métaux d'apport de brasage tendre et de brasage fort - Désignation (ISO 3677:2016)
Ta slovenski standard je istoveten z: EN ISO 3677:2016
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 3677
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2016
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN ISO 3677:1995
English Version
Filler metal for soldering and brazing - Designation (ISO
3677:2016)
Métaux d'apport de brasage tendre et de brasage fort - Zusätze zum Weich- und Hartlöten - Bezeichnung (ISO
Désignation (ISO 3677:2016) 3677:2016)
This European Standard was approved by CEN on 29 July 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3677:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 3677:2016) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be
withdrawn at the latest by April 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 3677:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3677:2016 has been approved by CEN as EN ISO 3677:2016 without any modification.
INTERNATIONAL ISO
STANDARD 3677
Third edition
2016-09-15
Filler metal for soldering and
brazing — Designation
Métaux d’apport de brasage tendre et de brasage fort — Désignation
Reference number
ISO 3677:2016(E)
©
ISO 2016
ISO 3677:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 3677:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Symbols and requirements . 1
2.1 General . 1
2.2 First part (applicable to all materials) . 1
2.3 Second part (applicable to all materials) . 1
2.4 Third part (for brazing filler metals only) . 2
3 Examples . 2
3.1 Solders .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.