oSIST prEN IEC 61514-2:2024

Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly

Systeme der industriellen Prozessleittechnik – Teil 2: Verfahren zur Bewertung des Betriebsverhaltens von intelligenten Ventilstellungsreglern mit pneumatischem Ausgang, die an Ventil-Stellantrieben montiert sind

Systèmes de commande des processus industriels - Partie 2: Méthodes d'évaluation des performances des positionneurs de vanne intelligents à sorties pneumatiques montés sur un ensemble actionneur/vanne

Sistemi za upravljanje industrijskih procesov - 2. del: Postopki za ocenjevanje lastnosti inteligentnih pozicionirnikov z ventili s pnevmatskimi izhodi, nameščenimi na sklop ventila aktuatorja

General Information

• Status: Not Published
• Public Enquiry End Date: 08-Sep-2024
• ICS: 23.060.99 - Other valves
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 09-Jul-2024
• Due Date: 26-Nov-2024
• Ref Project: prEN IEC 61514-2:2024 - Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly

Relations

• Revises: SIST EN 61514-2:2013 - Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs (IEC 61514-2:2013)
• Effective Date: 03-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Sistemi za upravljanje industrijskih procesov - 2. del: Postopki za ocenjevanje
lastnosti inteligentnih pozicionirnikov z ventili s pnevmatskimi izhodi,
nameščenimi na sklop ventila aktuatorja
Industrial process control systems - Part 2: Methods of evaluating the performance of
intelligent valve positioners with pneumatic outputs mounted on an actuator valve
assembly
Systeme der industriellen Prozessleittechnik – Teil 2: Verfahren zur Bewertung des
Betriebsverhaltens von intelligenten Ventilstellungsreglern mit pneumatischem Ausgang,
die an Ventil-Stellantrieben montiert sind
Systèmes de commande des processus industriels - Partie 2: Méthodes d'évaluation des
performances des positionneurs de vanne intelligents à sorties pneumatiques montés
sur un ensemble actionneur/vanne
Ta slovenski standard je istoveten z: prEN IEC 61514-2:2024
ICS:
23.060.99 Drugi ventili Other valves
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

65B/1257/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61514-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-07-05 2024-09-27
SUPERSEDES DOCUMENTS:
65B/1232/CD, 65B/1250/CC
IEC SC 65B : MEASUREMENT AND CONTROL DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Wallie Zoller
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve
positioners with pneumatic outputs mounted on an actuator valve assembly

PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC.
https://iecco-my.sharepoint.com/personal/iwi_iec_ch/Documents/65B/61514-2 Ed3/65B-1257-CDV.docx

– 2 – IEC CDV 61514-2 © IEC:2024
1 CONTENTS
2 FOREWORD . 4
3 INTRODUCTION . 6
4 1 Scope . 7
5 2 Normative references . 7
6 3 Terms and definitions . 9
7 4 Design review . 10
8 4.1 General . 10
9 Positioner identification . 11
4.2
10 4.2.1 Overview . 11
11 4.2.2 Power supply unit . 11
12 4.2.3 Sensor/input assembly . 11
13 4.2.4 Auxiliary sensor assembly . 11
14 4.2.5 Human interface . 12
15 Communication interface . 12
4.2.6
16 4.2.7 Data processing unit . 12
17 4.2.8 Output subsystem . 12
18 4.2.9 External functionality . 13
19 4.3 Aspects of functionality and capabilities to be reviewed . 13
20 4.3.1 Checklist . 13
21 Reporting. 19
4.3.2
22 4.4 Documentary information . 19
23 5 Performance testing . 21
24 5.1 General . 21
25 Standard reference test conditions . 21
5.2
26 5.2.1 Overview . 21
27 5.2.2 Valve characteristics . 21
28 5.3 General testing procedures . 23
29 5.3.1 Test set-up . 23
30 5.3.2 Testing precautions . 24
31 Initial observations and measurements . 24
5.4
32 5.4.1 Overview . 24
33 5.4.2 Mounting procedure . 24
34 5.4.3 Configuration procedures . 24
35 5.4.4 Stem position calibration procedure . 25
36 5.4.5 Stem position tuning procedure . 25
37 Performance test procedures . 26
5.5
38 5.5.1 General . 26
39 5.5.2 Effects of influence quantities . 29
40 6 Other considerations . 35
41 Safety. 35
6.1
42 6.2 Degree of protection provided by enclosures . 35
43 6.3 Electromagnetic emission . 35
44 6.4 Variants . 35
45 7 Evaluation report . 35
46 Annex A (normative) Vibration test set-up . 37

61514-2 © IEC:202X – 3 –
47 Bibliography . 38
49 Figure 1 – Positioner model in extensive configuration . 11
50 Figure 2 – Basic design for positioners with analogue outputs . 13
51 Figure 3 – Basic design for positioners with pulsed output . 13
52 Figure 4 – Basic test set-up . 24
53 Figure 5 – Examples of step responses of positioners . 29
54 Figure A.1 – Test set-up for vibration test . 37
56 Table 1 – Functionality (1 of 2) . 14
57 Table 2 – Configurability . 16
58 Table 3 – Hardware configuration . 17
59 Table 4 – Operability . 17
60 Table 5 – Dependability (1 of 2) . 18
61 Table 6 – Fail safe behaviour . 19
62 Table 7 – Reporting . 19
63 Table 8 – Document information . 20
64 Table 9 – Test under reference conditions (1 of 3) . 26
65 Table 10 – Matrix of instrument properties and tests (1 of 6) . 30
– 4 – IEC CDV 61514-2 © IEC:2024
68 INTERNATIONAL ELECTROTECHNICAL COMMISSION
69 ____________
71 INDUSTRIAL PROCESS CONTROL SYSTEMS –
73 Part 2: Methods of evaluating the performance of intelligent
74 valve positioners with pneumatic outputs mounted
75 on an actuator valve assembly
77 FOREWORD
78 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
79 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
80 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
81 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
82 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
83 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
84 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
85 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
86 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
87 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
88 consensus of opinion on the relevant subjects since each technical committee has representation from all
89 interested IEC National Committees.
90 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
91 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
92 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
93 misinterpretation by any end user.
94 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
95 transparently to the maximum extent possible in their national and regional publications. Any divergence between
96 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
97 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
98 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
99 services carried out by independent certification bodies.
100 6) All users should ensure that they have the latest edition of this publication.
101 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
102 members of its technical committees and IEC National Committees for any personal injury, property damage or
103 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
104 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
105 Publications.
106 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
107 indispensable for the correct application of this publication.
108 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
109 rights. IEC shall not be held responsible for identifying any or all such patent rights.
110 International Standard IEC 61514-2 has been prepared by subcommittee 65B: Measurement
111 and control devices, of IEC technical committee 65: Industrial-process measurement, control
112 and automation.
113 This part of IEC 61514-2 is to be used in conjunction with IEC 61514:202X.
114 This second edition c
...