SIST EN ISO 24804:2022/A11:2024
(Amendment)Recreational diving services - Requirements for rebreather diver training - No-decompression diving
Recreational diving services - Requirements for rebreather diver training - No-decompression diving
This document specifies requirements for rebreather diver training programmes which provide the competencies required to perform dives with a rebreather to a maximum depth of 30 m that do not require mandatory decompression stops using a nitrox breathing gas.
This document specifies evaluation criteria for these competencies.
This document specifies the requirements under which training is provided, in addition to the general requirements for recreational diving service provision in accordance with ISO 24803.
Dienstleistungen des Freizeittauchens - Anforderungen an die Ausbildung von Kreislaufgerätetauchern - Nullzeittauchen
Dieses Dokument legt Anforderungen an Ausbildungsprogramme für Kreislaufgerätetaucher fest, die die erforderlichen Kompetenzen vermitteln, um Tauchgänge mit einem Kreislaufgerät bis zu einer maximalen Tiefe von 30 m durchzuführen, die keine obligatorischen Dekompressionsstopps unter Verwendung eines Nitrox-Atemgasgemisches erfordern.
Dieses Dokument legt Bewertungskriterien für diese Kompetenzen fest.
Dieses Dokument legt die Anforderungen fest, unter denen die Ausbildung zusätzlich zu den allgemeinen Anforderungen für die Erbringung von Dienstleistungen im Bereich des Freizeittauchens nach ISO 24803 durchgeführt wird.
Services relatifs à la plongée de loisirs - Exigences concernant la formation des plongeurs à l’utilisation des recycleurs - Plongée sans décompression
Le présent document spécifie les exigences relatives aux programmes de formation des plongeurs à l’utilisation des recycleurs, qui définissent les compétences requises pour effectuer des plongées avec recycleur à une profondeur maximale de 30 m ne nécessitant pas de paliers de décompression obligatoires en utilisant un gaz respiratoire au nitrox.
Ce document spécifie également les critères d’évaluation de ces compétences.
Il précise les exigences applicables pour la formation, ainsi que les exigences générales relatives à la prestation de services de plongée de loisirs conformément à l’ISO 24803.
Storitve rekreativnega potapljanja - Zahteve za usposabljanje potapljačev pri potapljanju z zaprtim dihalnim krogom - Potapljanje brez dekompresije - Dopolnilo A11
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Storitve rekreativnega potapljanja - Zahteve za usposabljanje potapljačev pri
potapljanju z zaprtim dihalnim krogom - Potapljanje brez dekompresije - Dopolnilo
A11
Recreational diving services - Requirements for rebreather diver training - No-
decompression diving
Dienstleistungen des Freizeittauchens - Anforderungen an die Ausbildung von
Kreislaufgerätetauchern - Nullzeittauchen
Services relatifs à la plongée de loisirs - Exigences concernant la formation des
plongeurs à l’utilisation des recycleurs - Plongée sans décompression
Ta slovenski standard je istoveten z: EN ISO 24804:2022/A11:2024
ICS:
03.080.30 Storitve za potrošnike Services for consumers
03.200.99 Drugi standardi v zvezi s Other standards relating to
prostim časom in turizmom leisure and tourism
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 24804:2022/A11
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 03.080.30; 03.200.99
English Version
Recreational diving services - Requirements for rebreather
diver training - No-decompression diving
Services relatifs à la plongée de loisirs - Exigences Dienstleistungen des Freizeittauchens - Anforderungen
concernant la formation des plongeurs à l'utilisation an die Ausbildung von Kreislaufgerätetauchern -
des recycleurs - Plongée sans décompression Nullzeittauchen
This amendment A11 modifies the European Standard EN ISO 24804:2022; it was approved by CEN on 24 April 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24804:2022/A11:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex A (informative) A–deviations .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.