SIST EN 61596:2002
(Main)Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions
Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions
Specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EP-cores made of magnetic oxides and the dimensional limits for associated coil formers
EP-Kerne aus magnetischen Oxiden und Zubehörteile für die Verwendung in Drosseln und Transformatoren - Maße
Noyaux EP en oxydes magnétiques et pièces associées utilisés dans les inductances et transformateurs - Dimensions
Spécifie les dimensions qui revêtent une importance particulière pour l'interchangeabilité mécanique d'une gamme préférentielle de noyaux EP en oxydes magnétiques et les limites dimensionnelles des carcasses correspondantes.
Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions (IEC 61596:1995)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions (IEC 61596:1995)EP-Kerne aus magnetischen Oxiden und Zubehörteile für die Verwendung in Drosseln und Transformatoren - MaßeNoyaux EP en oxydes magnétiques et pièces associées utilisés dans les inductances et transformateurs - DimensionsMagnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions29.180Transformatorji. DušilkeTransformers. Reactors29.100.10Magnetne komponenteMagnetic componentsICS:Ta slovenski standard je istoveten z:EN 61596:1997SIST EN 61596:2002en01-september-2002SIST EN 61596:2002SLOVENSKI
STANDARD
SIST EN 61596:2002
SIST EN 61596:2002
SIST EN 61596:2002
SIST EN 61596:2002
SIST EN 61596:2002
NORMEINTERNATIONALEINTERNATIONALSTANDARDCEIIEC1596Première éditionFirst edition1995-05Noyaux EP en oxydes magnétiques etpièces associées utilisés dans les inductanceset transformateurs - DimensionsMagnetic oxide EP-cores and associatedparts for use in inductors andtransformers - Dimensions© CEI 1995 Droits de reproduction réservés — Copyright — all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun pro-cédé, électronique ou mécanique, y compris la photocopie etles microfilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without permissionin writing from the publisher.Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, SuisseCommission Electrotechnique Internationale CODE PRIXInternational Electrotechnical Commission PRICE CODEMettt,ayHapoauaa 3neltrporexHHgecHaa "%Nom Ha• Pour prix, voir catalogue en vigueurFor price, see current catalogueIEC•LSIST EN 61596:2002
1596 ©IEC:1995- 3 -CONTENTSPageFOREWORD 5Clause1Scope and object 72 Normative references 73 Conversion system 74 Primary standard
94.1Dimensions of EP-cores 94.2 Pin locations and base outlines 95 Derived standards
9AnnexesA EP-core design
17B Calculation formulae of effective parameter values of EP-cores
19C Example of a standard for the main dimensions of coil formers forEP-cores meeting the IEC primary standard
23SIST EN 61596:2002
1596 ©IEC:1995-5-INTERNATIONAL ELECTROTECHNICAL COMMISSIONMAGNETIC OXIDE EP-CORES AND ASSOCIATED PARTSFOR USE IN INDUCTORS AND TRANSFORMERS -DIMENSIONSFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardizationcomprising all national electrotechnical committees (IEC National Committees). The object of the IEC is topromote international cooperation on all questions concerning standardization in the electrical andelectronic fields. To this end and in addition to other activities, the IEC publishes International Standards.Their preparation is entrusted to technical committees; any IEC National Committee interested inthe subject dealt with may participate in this preparatory work. International, governmental andnon-governmental organizations liaising with the IEC also participate in this preparation. The IECcollaborates closely with the International Organization for Standardization (ISO) in accordance withconditions determined by agreement between the two organizations.2)The formal decisions or agreements of the IEC on technical matters, prepared by technical committees onwhich all the National Committees having a special interest therein are represented, express, as nearly aspossible, an international consensus of opinion on the subjects dealt with.3)They have the form of recommendations for international use published in the form of standards, technicalreports or guides and they are accepted by the National Committees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.International Standard IEC 1596 has been prepared by IEC technical committee 51:Magnetic components and ferrite materials.The text of this standard is based on the following documents:DISReport on voting
51/356/DIS51/390/RVDFull information on the voting for the approval of this standard can be found in the reporton voting indicated in the above table.Annexes A, B and C form an integral part of this standard.SIST EN 61596:2002
1596©IEC:1995- 7 -MAGNETIC OXIDE EP-CORES AND ASSOCIATED PARTSFOR USE IN INDUCTORS AND TRANSFORMERS -DIMENSIONS1 Scope and objectThis International Standard specifies the dimensions that are of importance for mechanicalinterchangeability for a preferred range of EP-cores made of magnetic oxides, thedimensional limits for coil formers to be used with these cores and the locations of theirterminal pins on a 2,50 mm printed wiring grid in relation to the base outlines of the cores,and the effective parameter values to be used in calculations involving them.The general considerations upon which the design of this range of cores is based are asgiven in annex A.2 Normative referencesThe following normative documents contain provisions which, through reference in thistext, constitute provisions of this International Standard. At the time of publication, theeditions indicated were valid. All normative documents are subject to revision, and partiesto agreements based on this International Standard are encouraged to investigate thepossibility of applying the most recent editions of the normative documents listed below.Members of IEC and ISO maintain registers of currently valid International Standards.IEC 205: 1966, Calculation of the effective parameters of magnetic piece partsAmendment No. 1 (1976)Amendment No. 2 (1981)IEC 367-1: 1982, Cores for inductors and transformers for telecommunications - Part 1:Measuring methodsAmendment No. 1 (1984)Amendment No. 2 (1992)ISO 370: 1975, Toleranced dimensions - Conversion from inches into millimetres and viceversa3 Conversion system3.1 The original system is the metric system.3.2 Single-limit millimetre dimensions (maximum or minimum) have been converted byapplying the appropriate conversion table of ISO 370 and rounding to two more decimalplaces than the original value in a given column relating to a particular dimension.SIST EN 61596:2002
1596 © IEC:1995- 9 -4 Pri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.