SIST EN 13892-2:2003

Methods of test for screed materials - Part 2: Determination of flexural and compressive strength

This European standard specifies a method for determining the flexural and compressive strength of moulded mortar specimens made from cementitious screed-, calcium sulfate screed-, magnesite screed- and synthetic resin material.

Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 2: Bestimmung der Biegezug- und Druckfestigkeit

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Biegezug- und Druckfestigkeit von geformten Prüfkörpern aus Zementestrich-, Calciumsulfatestrich-, Magnesiaestrich- und Kunstharzestrichmörtel fest.

Méthodes d'essai des matériaux pour chapes - Partie 2: Détermination de la résistance a la flexion et a la compression

La présente Norme européenne spécifie une méthode permettant de déterminer la résistance a la flexion et a la compression sur des éprouvettes de mortier moulées, confectionnées avec des matériaux pour chapes a base de ciment, de sulfate de calcium, de magnésie ou de résine synthétique.

Metode preskušanja za mešanice za estrih – 2. del: Določevanje upogibne in tlačne trdnosti

General Information

• Status: Published
• Publication Date: 31-Aug-2003
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2003
• Due Date: 01-Sep-2003
• Completion Date: 01-Sep-2003
• Directive: 89/106/EEC - Construction products
• Mandate: M/132 - Addenda to the mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures, structural bearings and floorings
• Ref Project: EN 13892-2:2002 - Methods of test for screed materials - Part 2: Determination of flexural and compressive strength

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Methods of test for screed materials - Part 2: Determination of flexural and compressive strengthWUGQRVWLMéthodes d'essai des matériaux pour chapes - Partie 2: Détermination de la résistance a la flexion et a la compressionPrüfverfahren für Estrichmörtel und Estrichmassen - Teil 2: Bestimmung der Biegezug- und Druckfestigkeit91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:SIST EN 13892-2:2003enTa slovenski standard je istoveten z:EN 13892-2:200201-september-2003SIST EN 13892-2:2003SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-2November 2002ICS 91.100.10English versionMethods of test for screed materials - Part 2: Determination offlexural and compressive strengthMéthodes d'essai des matériaux pour chapes - Partie 2:Détermination de la résistance à la flexion et à lacompressionPrüfverfahren für Estrichmörtel und Estrichmassen - Teil 2:Bestimmung der Biegezug- und DruckfestigkeitThis European Standard was approved by CEN on 9 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-2:2002 E



EN 13892-2:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Symbols and abbreviations.45Apparatus.55.1Testing machine.55.2Apparatus specific to each test.55.2.1Flexural test.55.2.2Compression test.56Procedure.56.1Flexural test.56.2Compression test.67Test report.6



EN 13892-2:2002 (E)3ForewordThis document (EN 13892-2:2002) has been prepared by Technical Committee CEN/TC 303, "Floor screeds andin-situ floorings in buildings", the secretariat of which is held by DIN.It was prepared by Working Group 2 ”Screed materials and floor screeds-Test-methods“ taking into account theproposals submitted by Working Group 1 ”Screed materials and floor screeds-Definitions, properties andrequirements“.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2003, and conflicting national standards shall be withdrawn at the latest byMay 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.



EN 13892-2:2002 (E)41 ScopeThis European Standard specifies a method for determining the flexural and compressive strength of mouldedspecimens made from cementitious screed-, calcium sulphate screed-, magnesite screed- and synthetic resinscreed material.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 196-1,Methods of testing cement - Part 1: Determination of strength.EN 13813,Screed material and floor screeds - Screed material - Properties and requirements.EN 13892-1,Methods of test for screed materials – Part 1: Sampling, making and curing specimens for test.EN ISO 6507-1,Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997).3 PrincipleThe flexural and compressive strengths are measured on specimens made in accordance with EN 13892-1. Theflexural test is carried out first. The flexural strength is determined from the load required to cause failure of the testspecimen under midspan bending.The two halves of the broken test specimen are then used in the compression test. Each is tested using a uniformlydistributed compressive load applied over a portion of the broken prism. The compressive st
...