Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und Schaltelemente - Näherungsschalter

Appareillage à basse tension - Partie 5-2: Appareils et éléments de commutation pour circuits de commande - Détecteurs de proximité

Nizkonapetostne stikalne in krmilne naprave - 5-2. del: Krmilne naprave in stikalni elementi - Približevalna stikala - Dopolnilo AA

General Information

Status
Not Published
Public Enquiry End Date
28-Feb-2021
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
18-Dec-2020
Due Date
07-May-2021
Completion Date
08-Mar-2021

RELATIONS

Buy Standard

Amendment
SIST EN IEC 60947-5-2:2020/oprAA:2021
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 60947-5-2:2020/oprAA:2021
01-februar-2021

Nizkonapetostne stikalne in krmilne naprave - 5-2. del: Krmilne naprave in stikalni

elementi - Približevalna stikala - Dopolnilo AA

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching

elements - Proximity switches
Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und Schaltelemente -
Näherungsschalter

Appareillage à basse tension - Partie 5-2: Appareils et éléments de commutation pour

circuits de commande - Détecteurs de proximité
Ta slovenski standard je istoveten z: EN IEC 60947-5-2:2020/prAA
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 60947-5-2:2020/oprAA:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EUROPEAN STANDARD DRAFT
EN IEC 60947-5-2:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
December 2020
ICS 29.120.40; 29.130.20
English Version
Low-voltage switchgear and controlgear - Part 5-2: Control
circuit devices and switching elements - Proximity switches

Appareillage à basse tension - Partie 5-2: Appareils et Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und

éléments de commutation pour circuits de commande - Schaltelemente - Näherungsschalter

Détecteurs de proximité

This draft amendment prAA, if approved, will modify the European Standard EN IEC 60947-5-2:2020; it is submitted to CENELEC members

for enquiry.
Deadline for CENELEC: 2021-03-05.
It has been drawn up by CLC/TC 121A.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to

the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to

provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and

shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Project: 69836 Ref. No. EN IEC 60947-5-2:2020/prAA E
---------------------- Page: 3 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
12 Contents Page

13 European foreword .................................................................................................................................. 3

14 1 Modification to Clause 1, “Scope”.................................................................................................... 4

15 2 Addition of Annex ZC, “Proximity switches with integrated radio functionality” ............................... 4

16 3 Additions to the Bibliography ......................................................................................................... 10

---------------------- Page: 4 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
17 European foreword

18 This document (EN IEC 60947-5-2:2020/prAA:2020) has been prepared by CLC/TC121A “Low-voltage

19 switchgear and controlgear”.
20 This document is currently submitted to the Formal Vote.
21 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 3 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 6 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 27 months
conflicting with this document have to be
withdrawn
22 This document will amend EN IEC 60947-5-2:2020.

23 This document has been prepared under mandate(s) M/536 and M/511 given to CENELEC by the European

24 Commission and the European Free Trade Association, and supports essential requirements of EU Directive

25 2014/53/EU.

26 For the relationship with EU Directive(s) see informative Annex ZZC, which is an integral part of this document.

27 This amendment is expected to be read in conjunction with EN IEC 60947-5-2:2020. It specifies additional

28 safety and EMC requirements for proximity switches that incorporate radio functionality in a fixed and permanent

29 manner.
---------------------- Page: 5 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
30 1 Modification to Clause 1, “Scope”
31 Add the following new paragraph and note at the end of the existing text:

32 “Annex ZC of this document defines requirements in respect of safety under article 3.1(a) and Electromagnetic

33 Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for proximity switches that incorporate one or

34 more radio technologies as set out in Clause ZC.2 in a fixed and permanent manner.

35 NOTE Requirements applicable to the efficient use of radio spectrum are not included in this document. These

36 requirements can be found in the applicable ETSI product standard(s) for the effective use of the radio spectrum under

37 article 3.2 of Directive 2014/53/EU.”
38 2 Additions to Clause 2, "Normative references"
39 Add the following normative references:
40 “

41 EN 55032:2015, Electromagnetic compatibility of multimedia equipment - Emission Requirements

42 EN IEC 61000-6-4:2019, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission

43 standard for industrial environments

44 EN IEC 62311:2020, Assessment of electronic and electrical equipment related to human exposure restrictions

45 for electromagnetic fields (0 Hz to 300 GHz)

46 EN 62479:2010, Assessment of the compliance of low power electronic and electrical equipment with the basic

47 restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)

48 ETSI EN 301-489-3, V2.1.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;

49 Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246

50 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

51 ETSI EN 301-489-17, V3.2.3, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;

52 Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for

53 ElectroMagnetic Compatibility

54 ETSI EN 301-489-19, V2.1.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;

55 Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band

56 providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing

57 positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article

58 3.1(b) of Directive 2014/53/EU

59 ETSI EN 301-489-33, V2.2.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;

60 Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential

61 requirements of article 3.1(b) of Directive 2014/53/EU"
Final Draft (under approval at the time of vote).
---------------------- Page: 6 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
62 3 Additions to Clause 3, "Terms and Definitions"
63 Add the following terms and definitions to 3.1:
64 "
65 Z.3.1.1
66 antenna port

67 port for connection of an antenna used for intentional transmission and/or reception of radiated RF energy

68 [SOURCE: ETSI EN 303 446-2 (V1.2.1), modified – Note deleted.]
69 Z.3.1.2
70 exclusion band

71 frequency range where during immunity test, the radio functionality is not required to meet the performance

72 criteria defined for the specific test and where the emissions are not assessed

73 [SOURCE: ETSI EN 303 446-2 (V1.2.1)]
74 Z.3.1.3
75 function
76 operation carried out by an equipment

77 Note 1 to entry: Functions are related to basic technologies incorporated in the equipment such as radio

78 reception, radio transmission, emitting light, conversion of physical dimensions to electrical signals.

79 [SOURCE: ETSI EN 303 446-2 (V1.2.1)]
80 Z.3.1.4
81 port

82 particular interface, of the specified equipment, with the electromagnetic environment

83 Note 1 to entry: For example, any connection point on an equipment intended for connection of cables to or from that

84 equipment is considered as a port (see Figure ZC.1).

85 Note 2 to entry: In the case of integral antenna equipment the antenna port is the same as the enclosure port.

86 [SOURCE: ETSI EN 303 446-2 (V1.2.1), modified – Figure 1 deleted from definition and inserted as

87 Figure ZC.1, Note 1 to entry updated.]
88 Z.3.1.5
89 radio equipment

90 electrical or electronic product, which intentionally emits and/or receives radio waves for the purpose of radio

91 communication and/or radio determination, or an electrical or electronic product which must be completed with

92 an accessory, such as antenna, so as to intentionally emit and/or receive radio waves for the purpose of radio

93 communication and/or radio determination
94 [SOURCE: Radio Equipment Directive 2014/53/EU, Article 2.1(1)]
95 Z.3.1.6
96 wired network port

97 point of connection for data and signaling transfers intended to interconnect widely dispersed systems by direct

98 connection to a single-user or multi-user communication network (for example LAN and similar networks)

99 Note 1 to entry: These ports can support screened or unscreened cables and can also carry AC or DC power where this

100 is an integral part of the telecommunication specification."
---------------------- Page: 7 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
101
Add the following subclause Z.3.5, "Abbreviations":
102 "Z.3.5 Abbreviations

103 For the purpose of this annex, the abbreviations defined elsewhere in this standard and the following apply:

EMF electromagnetic fields
EUT equipment under test
GNSS global navigation satellite system
LAN local area network
RF radio frequency
RNSS radio-navigation satellite service
ROGNSS receive only global navigation satellite system
ROMES receive only mobile earth station
UWB ultra wide band
104 "

105 4 Addition of Annex ZC, “Proximity switches with integrated radio functionality”

106 Insert the following new Annex ZC:
107 "
108 Annex ZC
109 (normative)
110
111 Proximity switches with integrated radio functionality
112 ZC.1 General

113 The requirements of the main body of this standard apply unless otherwise stated in this Annex.

114 This Annex defines additional requirements in respect to safety under article 3.1(a) and Electromagnetic

115 Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for proximity switches that incorporate one or

116 more radio technologies as set out in Clause ZC.2 in a fixed and permanent manner.

117 ZC.2 Inc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.